Search

Light-fidelity (LiFi) is recognised as a promising technology for next generation wireless access networks. However, limited research efforts have been spent on the uplink (UL) transmission system in LiFi networks. In this article, a wireless infrared (IR)-based LiFi UL system is investigated. In particular, we focus on the performance of a single static user under the influence of random device orientation and link blockage. Simulations and mathematical analysis have been used to evaluate the UL system performance. The analytical expressions for the UL optical wireless channel and signal-to-noise ratio (SNR) statistics under the effects of random device orientation and link blockage are derived. The results show that the effects of random orientation and link blockage may lead to a decrease in coverage probability by 10% - 40% with various SNR thresholds. [ABSTRACT FROM AUTHOR]

In this paper, a hybrid radio frequency (RF) and visible light communication (VLC) system is considered. A hybrid system with multiple VLC access points (APs) and RF APs is designed and analyzed. In indoor environments, VLC APs provide very high data rates whilst proving illumination, and RF APs offer ubiquitous coverage with moderate data rates. Since VLC networks piggyback on existing lighting infrastructures, they may not always be able to provide full coverage despite supporting very high data rates in some areas. Hence in practical deployments, the standalone VLC networks should be augmented in order to improve the per user data rate coverage. In this context, RF APs can be used to improve the per user rate coverage of VLC networks as well as to provide the ubiquitous control functionalities. In this paper, a simple RF deployment is proposed in order to improve the per user outage data rate performance of standalone VLC networks. It is assumed that the VLC system resources are fixed, and this paper quantifies the minimum spectrum and power requirements for a RF system, which after introduction to the VLC system, the hybrid RF/VLC system achieves certain per user rate coverage performances. [ABSTRACT FROM AUTHOR]

Light fidelity (LiFi) uses light emitting diodes (LEDs) for high-speed wireless communications. Since an LED lamp covers a small area, a LiFi system with multiple access points (APs) can offer a significantly high spatial throughput. However, the spatial distribution of data rates achieved by LiFi fluctuates because users experience inter-cell interference from neighboring LiFi APs. In order to guarantee a quality of service (QoS) for all users in the network, an RF network is considered as an additional wireless networking layer. This hybrid LiFi/RF network enables users with low levels of optical signals to achieve the desired QoS by migrating to the RF network. With regard to moving users, the hybrid LiFi/RF system dynamically allocates either a LiFi AP or an RF AP to users based on their channel state information. In this paper, a dynamic load balancing scheme is proposed, which considers the handover overhead in order to improve the overall system throughput. Joint optimization algorithm (JOA) and separate optimization algorithm (SOA), which jointly and separately optimize the AP assignment and resource allocation, respectively, are proposed. Simulation results show that SOA can offer a better performance/complexity tradeoff than JOA for system load balancing. [ABSTRACT FROM PUBLISHER]