Search

This article proposes and presents an innovative approach to realizing the concurrent dual-band transmission with only a single front-end and local oscillator at radio frequency (RF). Fundamentally, the proposed concurrent dual-band front-end is based on the conventional multiport interferometric architecture for single-band operation. Nevertheless, the conventional variable loads are replaced by diode networks with IF input signals to produce the RF signals at their designated center frequencies. Furthermore, due to the linear characteristics of a multiport network, the signals with different data contents will be mixed into both RF channels. To this end, an inverse matrix operation is applied to reversely convert the original data streams before the modulations of IF input signals. As a result, the two original data streams can be effectively modulated into specific RF channels (for transmission) with minimal interchannel interferences based on this configuration. In addition to the theoretical analyses, this innovative concurrent dual-band transmitting front-end has been investigated and verified with $M$ -quadrature amplitude modulation (QAM) signals in simulations and experiments. All outcomes demonstrate excellent performances in concurrent dual-band transmission with significant reductions in both size and biasing power. [ABSTRACT FROM AUTHOR]

A distinct usage of the conventional multiport architecture is introduced in this work to explore the compendious scheme of a concurrent dual-band interferometric receiver. Dual RF signals at individual frequency channels are received simultaneously, and only a single low-power local oscillator (LO) source is deployed for frequency translation or conversion to the same intermediate frequency (IF) band. Although these signals are spectrally overlapped, they can be extracted with a simple and efficient algorithm with good channel-to-channel isolations. Compared to the conventional multiport configuration, the power detectors are replaced by analog-to-digital converters (ADCs) to process the signals in this proposed scheme. The underlying physics of the concurrent receiving operation is explained and derived analytically. Some experiments are also presented to investigate various performance indexes, including signal linearity, noise behavior, interchannel interference, and so forth. Lastly, multiple $M$ -quadratic-amplitude modulation (QAM) signals are applied to evaluate the communication behavior of the proposed receiver architecture. Distortions due to frequency drift, channel imbalance, and in-phase and quadrature (IQ) imbalance are studied, and bit-error-rates (BER) are measured and compared with their theoretical counterparts. All obtained results confirm that the proposed interferometric receiver provides good communication performances. [ABSTRACT FROM AUTHOR]

A tilted bi‐sense circularly polarized (CP) antenna and its application for UHF radio frequency identification (RFID) system is proposed. A planar concial monopole working as the electric dipole is designed at first. When a shorting pin is added, a loop radiator would be generated, and thus a pair of orthogonally oriented complementary dipoles is realized. In this way, both right‐handed circularly polarized (RHCP) and left‐handed circularly polarized waves (LHCP) are generated simultaneously in tilted directions within one hemisphere. Then, closed‐form formulas are derived to reveal the tunability mechanism of bi‐sense property and provide a design guideline for system application. It is demonstrated that flare angle of conical monopole has a linear relationship and sine function to CP beam direction and 3‐dB axial ratio (AR) beamwidth, respectively. Finally, antenna prototypes are fabricated and tested for validation. It is also demonstrated that at the tilted direction of θ = ± 45°, a 3‐dB AR bandwidth of 4.9%, and gain up to 5 dB are realized. Comparing with conventional microstrip patch antenna, an enhanced reading range over 5 m can be obtained in the tilted range from 40° to 75° and − 75° to −40° in UHF RFID sytem application. [ABSTRACT FROM AUTHOR]

This paper presents the concept and demonstration of harmonic diversity for wireless communication, which makes use of multiple harmonic radio frequency (RF) channels with respect to the carrier frequency. Rather than frequency and space diversities widely used today to improve multipath fading, signal quality and spectral efficiency, the proposed scheme does not require multiple RF transceiver front-ends. The advantages of inherent RF device nonlinear characteristics are harnessed to produce and process harmonics within single transceiver. Even though distinct harmonic channels will exhibit different order of phase shifts, the analysis shows that such phase offsets can be compensated by adjusting the phase of local oscillator (LO) at receiver end. Extending the framework of the Shannon theorem, an M-channel harmonic communication system is shown to reduce the minimum required signal-to-noise ratio (SNR) at the input of receiver by M-times. In addition, this work indicates that the power consumption of transmitter can be significantly reduced up to 66% than the conventional ones. Through the analysis of channel capacity, the harmonic system is proved to outperform the single channel counterpart especially when SNR is low. To validate the correctness of the proposed concept, a series of experiments are carried out to emulate the developed theoretical models. For instance, a three-channel harmonic communication system is prototyped, involving certain RF harmonic components designed for demonstration. The retrieved signal strengths are examined with different phase setting of receiving LO, and various modulation techniques are applied for estimating the system performances. All measured results are in agreement with their simulated counterparts, thereby demonstrating the correctness and usefulness of the proposed theories and techniques for nonlinear communication systems of harmonic diversity. [ABSTRACT FROM PUBLISHER]