Search

The occurrence of passive intermodulation (PIM) is inevitable in high-power microwave devices. It interferes with wireless communication and radar systems, resulting in severe deterioration of receiving performance. So far, narrowband PIM analyzers have been realized for different business bands. However, they are incapable of testing wideband systems. To solve this problem, rack-mounted analyzers piled with multiple narrowband analyzers were implemented. While such solutions significantly increase the volume, cost, and power consumption, they cannot provide a wide, continuous bandwidth for PIM localizations. Aiming to solve this problem, we propose a novel solution for realizing ultrawideband PIM analyzers. Based on the principle of cooperative radio frequency and baseband (RF-BB) nulling, we demonstrate an experimental prototype working within a continuous frequency band covering three octaves, exhibiting promising potential in PIM testing applications. [ABSTRACT FROM AUTHOR]

This letter proposed a combined susceptibility diagram, applicable to investigating and differentiating the inherent mechanism of multipactor in dielectric-loaded microwave devices. This susceptibility diagram consists of average secondary emission yield on the dielectric surface and both the surfaces. Using this diagram, we predict the electron multiplication mechanism in the partially dielectric-loaded parallel-plate waveguide. It is found that the multipactor extinguishing only occurs for a low multipaction rate, while the saturation occurs for a higher multipaction rate. To verify its validity, the dynamic evolution of multipactor is investigated by electrostatic particle-in-cell. A good agreement between simulations and prediction results has been achieved. This susceptibility diagram thus constructed can provide a guidance to clearly identify the condition for multipactor extinguishing or saturation. [ABSTRACT FROM AUTHOR]

This paper proposes a theoretical model for the single-surface multipactor on a dielectric. We consider the combined effects of the normal cumulative electric field, the normal and tangential radio frequency (RF) electric fields, as well as the tangential external direct current (DC) magnetic field and study the suppression effect of the tangential external DC magnetic field on the resonant multipactor. Kinetic properties of the electron and the resonant multipactor condition with no tangential external DC magnetic field are derived by analytical calculations. The flight time of the electron is analyzed profoundly by considering different values of the electron's initial energy, the amplitude ratio between the normal cumulative electric field and the normal RF electric field, and the tangential external DC magnetic field. Our results demonstrate that the tangential external DC magnetic field can decrease the flight time, and hence, the resonant multipactor can be suppressed or mitigated effectively by the tangential external DC magnetic field. The flight time of the electron shows a decreasing trend as the electron's initial energy increases, and the amplitude ratio between the normal cumulative electric field and the normal RF electric field decreases. The suppression effect of the tangential external DC magnetic field on the resonant multipactor can be much stronger when the amplitude ratio between the normal cumulative electric field and the normal RF electric field becomes larger. The resonant multipactor suppressing is also relevant to the amplitude ratio and the initial phase difference between the tangential and normal RF electric fields. [ABSTRACT FROM AUTHOR]

The aim of this article is to establish a general and practical analytical model of the one-sided multipactor on a dielectric of a metal surface and analyze the resonant multipactor effect for the recent growing interest in spacecrafts. A theoretical multipactor model involving a normal static electric field, a radio frequency (RF) electric field with both tangential and normal components, and the influence of the desorption gas is proposed. The kinetic properties and the resonant condition of the electron are studied by analytical calculations. The results show that the transit time of the electron decreases with the increase in the normal static electric field and the pressure of the desorption gas. The emission phase of the electron is the paramount factor that has a direct influence on the occurrence of the resonant multipactor. If the resonant multipactor effect could appear, the emission phase of the electron should be larger than a critical phase, and the ratio between the amplitude of the normal component of the RF electric field and the normal static electric field should be larger than a specific value as well. [ABSTRACT FROM AUTHOR]

A 2-pixel heterodyne receiver working in the 173–205-GHz band is presented in this paper. This receiver prototype is mainly composed of two balanced Schottky-based quadrature mixers and an integrated local oscillator (LO) chain. Based on sub-harmonically pumped mixing and quadrature coupling schemes, the proposed receiver operates in double sideband (DSB) mode or single sideband (SSB) mode. With combination of an external intermediate frequency (IF) 3-dB quadrature hybrid, the receiver can furtherly operate in sideband separation (2SB) mode. E-plane Riblet short-slot couplers combined with probe transitions are firstly employed in the radio frequency (RF) and LO path to realize quadrature configuration simultaneously; detailed theoretical derivation on 2SB operation is also given. The 2-pixel receiver is fabricated and tested, the measured SSB conversion loss of each channel achieves 12–20 dB when pumped with 18 dBm of input power at Ku-band, and the imbalance of conversion loss is less than 2 dB between all the IF ports. The typical sideband rejection ratio (SRR) is 12–16 dB over the operation frequency band. The corresponding achievements are valuable in the follow-up focal plane array detection system. [ABSTRACT FROM AUTHOR]

Terahertz technology is one of the research fronts in the microwave society. Among many technical challenges, achieving high-power terahertz radiation has been attracting many efforts. In this paper, we investigate the possibility of power synthesis at low-end frequencies of the terahertz gap based on discrete sources. We show that by applying precision digital phase control, such a power synthesis can be achieved, overcoming the difficulty of phase alignment at these frequencies. For demonstration, we implement a 110-GHz prototype system employing solid-state impact avalanche and transit time diodes. Using a simulation- and measurement-based design methodology, the impedance matching of the designed cavity is able to be simultaneously obtained at both the RF bias and the 110-GHz frequency without using any absorbing material. Detailed design, simulation, and measurement of the prototype are introduced and the experimental results comply well with analytical expectations. Analysis shows that with increased wide digital bit width, the proposed approach is able to provide sufficient phase control precision, making it possible to be used in the power synthesis applications at low terahertz frequencies. [ABSTRACT FROM AUTHOR]