Search

Despite interesting properties, the use of 67 Cu, 186 Re and 47 Sc theranostic radionuclides in preclinical studies and clinical trials is curtailed by their limited availability due to a lack of widely established production methods. An IAEA Coordinated Research Project (CRP) was initiated to identify important technical issues related to the production and quality control of these emerging radionuclides and related radiopharmaceuticals, based on the request from IAEA Member States. The international team worked on targetry, separation, quality control and radiopharmaceutical aspects of the radionuclides obtained from research reactors and cyclotrons leading to preparation of a standard recommendations for all Member States. The CRP was initiated in 2016 with fourteen participants from thirteen Member States from four continents. Extraordinary results on the production, quality control and preclinical evaluation of selected radionuclides were reported in this project that was finalized in 2020. The outcomes, outputs and results of this project achieved by participating Member States are described in this minireview., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

Background: A significant number of developing countries have no facilities to produce medical radioisotopes and radiopharmaceuticals., Objective: In this paper we show that access to life-saving radioisotopes and radiopharmaceuticals and the geographical distribution of corresponding infrastructure is highly unbalanced worldwide., Methods: We discuss the main issues which need to be addressed in order to establish the production of radioisotopes and radiopharmaceuticals, which are especially important for developing countries as newcomers in the field. The data was gathered from several sources, including databases maintained by the International Atomic Energy Agency (IAEA), World Health Organization (WHO), and other international organizations; personal interactions with representatives in the nuclear medicine field from different regions of the world; and relevant literature., Results: Developing radioisotope and radiopharmaceutical production program and installing corresponding infrastructure requires significant investments, both man-power and financial. Support already exists to help developing countries establish their medical radioisotope production installations from several organizations, such as IAEA., Conclusion: This work clearly shows that access to life-saving radioisotopes and the geographical distribution of corresponding infrastructure is highly unbalanced. Technology transfer is important as it not only immediately benefits patients, but also provides employment, economic activity and general prosperity in the region to where the technology transfer is implemented., (Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.net.)

In this study, we discuss producing radioisotopes using linear electron accelerators and address production and separation issues of photoneutron (γ,n) and photoproton (γ,p) reactions. While (γ,n) reactions typically result in greater yields, separating product nuclides from the target is challenging since the chemical properties of both are the same. Yields of (γ,p) reactions are typically lower than (γ,n) ones, however they have the advantage that target and product nuclides belong to different chemical species so their separation is often not such an intricate problem. In this paper we consider two examples, (100)Mo(γ,n)(99)Mo and (68)Zn(γ,p)(67)Cu, of photonuclear reactions. Monte-Carlo simulations of the yields are benchmarked with experimental data obtained at the Idaho Accelerator Center using a 44MeV linear electron accelerator. We propose using a kinematic recoil method for photoneutron production. This technique requires (100)Mo target material to be in the form of nanoparticles coated with a catcher material. During irradiation, (99)Mo atoms recoil and get trapped in the coating layer. After irradiation, the coating is dissolved and (99)Mo is collected. At the same time, (100)Mo nanoparticles can be reused. For the photoproduction method, (67)Cu can be separated from the target nuclides, (68)Zn, using standard exchange chromatography methods. Monte-Carlo simulations were performed and the (99)Mo activity was predicted to be about 7MBq/(g(⁎)kW(⁎)h) while (67)Cu activity was predicted to be about 1MBq/(g(⁎)kW(⁎)h). Experimental data confirm the predicted activity for both cases which proves that photonuclear reactions can be used to produce radioisotopes. Lists of medical isotopes which might be obtained using photonuclear reactions have been compiled and are included as well., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

We have used EML Surface Air Sampling Program (SASP) data to analyze the long-term trend in (7)Be surface concentration and address possible correlation between this long-term trend and climatic changes, namely changes in precipitation patterns and temperature. In this paper we present (7)Be concentration data from 23 sites, spanning over 25 years, all over the world, and extract long-term trend parameter using two independent techniques. The (7)Be concentrations in most stations show a pronounced decreasing trend, potentially corresponding to statistically significant changes in transporting (7)Be from upper atmosphere source to these sites. Weak negative correlation between (7)Be concentration and amount of precipitation was also observed. However, more data from more representative sites around the world are needed the statistical robustness of this trend., (Published by Elsevier Ltd.)

Isotopes have been widely applied in a variety of scientific subjects; many aspects of isotopes, however, remain not well understood. In this study, I investigate the relation between the number of neutrons (N) and the number of protons (Z) in stable isotopes of non-radioactive elements and long-lived isotopes of radioactive elements at the double-linear scale (conventional Segrè chart) and the double-logarithmic scale. Statistical analyses show that N is a power-law function of Z for these isotopes: N = 0.73 x Z[sup 116]. This power-law relation provides better predictions for the numbers of neutrons in stable isotopes of nonradioactive elements and long-lived isotopes of radioactive elements than the linear relation on the conventional Segrè chart. The power-law pattern reveled here offers empirical guidance for probing long-lived isotopes of unknown radioactive elements. [ABSTRACT FROM AUTHOR]

In this paper we discuss our experimental work in photoproducing two medically-useful radioisotopes (Zn(γ,p) Cu and Ca(γ,n)Ca → Sc) using an electron linear accelerator. We further address the issues of production and separation of medical isotopes arising from photoneutron (γ,n) and photoproton (γ,p) reactions. While (γ,n) reactions typically result in greater yields, separating product nuclides from the target is challenging since the chemical properties of both nuclides are identical. Although the yields of (γ,p) reactions are typically lower than for (γ,n), these proton-rich isotopes have the advantage that target and product nuclides belong to different chemical species allowing for more straightforward chemical separation. We conclude the paper by touching upon the dire necessity of experimentally revisiting a broad swath of photonuclear reactions in the 10- to 50-MeV regime. The very paucity of empirical cross-sectional data makes it altogether impossible to realistically predict accelerator-based photoproduction of many promising radiopharmaceuticals. [ABSTRACT FROM AUTHOR]

In this paper we discuss the optimum shape of a target for photonuclear production of radioisotopes using an electron linear accelerator. Different target geometries such as right cylinder, conical frustum, Gaussian volume of revolution and semi-ellipsoid have been considered for the production of 67 Cu via 68 Zn(γ,p) 67 Cu photonuclear reaction. The specific activity (SA) of 67 Cu was simulated for each target shape. Optimum ratio of radius to height for cylindrical targets was found to be between 0.2 and 0.25 for target masses ranging from 20 g to 100 g. It was shown that while some unconventional target shapes, such as semi-elliptical volume of revolution, result in slightly higher specific activities than cylindrical targets, the advantage is not significant and is outweighed by the complexity of the target production and handling. Power deposition into the target was modeled and the trade-off between the maximization of 67 Cu yield and the minimization of target heating has been discussed. The 67 Cu case can easily be extended for production of many other isotopes. [ABSTRACT FROM AUTHOR]