Search

To improve positron emission tomography (PET) image quality, depth-of-interaction (DOI) information and time-of-flight (TOF) information are key technologies. In this work, we developed the DOI-TOF detector based on our original single-ended readout scheme with the continuous layered gadolinium fine aluminum garnet (GFAG) array. The size of each GFAG crystal is $1.45\times 1.45\times 20$ mm3. The multipixel photon counter (MPPC) used as a photo sensor has a surface area of $3.0\times 3.0$ mm2. One pair of crystals coupled with a partial optical window is arranged across two MPPCs. Boundaries without the partial optical window are covered with optical reflectors. Each pair is coupled with paired MPPCs of different patterns. Crystal identification is obtained from paired MPPCs of different patterns and output rates. By limiting the spread of scintillation light, the proposed DOI detector based on the local centroid calculation was expected to improve crystal response, including the edge. For performance comparison, we prepared three discrete layers of the GFAG array with the same total thickness. For the continuous layer, the DOI resolution, the energy resolution and the timing resolution of the pair of detectors are 4.7 mm, 14%, and 402 ps, respectively. Their respective values are 29%, 20%, and 33% better than those with the three discrete layers.

In this article, we developed the novel single-end readout depth-of-interaction (DOI) detector with quadrisected crystals comparable in size to a single photo sensor. The proposed DOI detector consists of 784 gadolinium aluminum gallium garnet (GAGG) crystals, which are arranged in four layers of $14\times14$ arrays coupled with an $8\times8$ multipixel photon counter (MPPC) array. The size of each GAGG crystal is $1.45\times 1.45\times4.5$ mm3. Also, each MPPC has a surface area of $3.0\times3.0$ mm2. One pair of four-layered crystals coupled with a partial optical window is arranged across two MPPCs. Boundaries without the partial optical window are covered with optical reflectors. Light sharing is done between a pair of four-layered crystals optically coupled at one end. Each pair is coupled with paired silicon photomultipliers of different patterns. Crystal identification from each pair is obtained from the output rate of two MPPCs. From 511-keV uniform irradiation, responses of all crystal elements in the four layers can be separated clearly on a 2-D position histogram after applying the Anger calculation. Also, DOI information can be mapped to each cluster on curved lines. The energy resolution for all crystals is 9.1% after event reduction of intercrystal scatter.

Objective. In carbon ion therapy, the visualization of the range of incident particles in a patient body is important for treatment verification. In-beam positron emission tomography (PET) imaging is one of the methods to verify the treatment in ion therapy due to the high quality of PET images. We have shown the feasibility of in-beam PET imaging of radioactive 15O and 11C ion beams for range verification using our OpenPET system. Recently, we developed a whole gamma imager (WGI) that can simultaneously work as PET, single gamma ray and triple gamma ray imaging. The WGI has high potential to detect the location of 10C, which emits positrons with a simultaneous gamma ray of 718 keV, within the patient’s body during ion therapy. Approach. In this work, we focus on investigating the performance of WGI for 10C imaging and its feasibility for range verification in carbon ion therapy. First, the performance of the WGI was studied to image a 10C point source using the Geant4 toolkit. Then, the feasibility of WGI was investigated for an irradiated polymethyl methacrylate (PMMA) phantom with a 10C ion beam at the carbon therapy facility of the Heavy Ion Medical Accelerator in Chiba. Main results. The average spatial resolution and sensitivity for the simulated 10C point source at the centre of the field of view were 5.5 mm FWHM and 0.010%, respectively. The depth dose of the 10C ion beam was measured, and the triple gamma image of 10C nuclides for an irradiated PMMA phantom was obtained by applying a simple back projection to the detected triple gammas. Significance. The shift between Bragg peak position and position of the peak of the triple gamma image in an irradiated PMMA phantom was 2.8 ± 0.8 mm, which demonstrates the capability of triple gamma imaging using WGI for range verification of 10C ion beams.