Search

Background: FLASH radiotherapy based on ultra‐high dose rate (UHDR) is actively being studied by the radiotherapy community. Dedicated UHDR electron devices are currently a mainstay for FLASH studies. Purpose: To present the first Monte Carlo (MC) electron beam model for the UHDR capable Mobetron (FLASH‐IQ) as a dose calculation and treatment planning platform for preclinical research and FLASH‐radiotherapy (RT) clinical trials. Methods: The initial beamline geometry of the Mobetron was provided by the manufacturer, with the first‐principal implementation realized in the Geant4‐based GAMOS MC toolkit. The geometry and electron source characteristics, such as energy spectrum and beamline parameters, were tuned to match the central‐axis percentage depth dose (PDD) and lateral profiles for the pristine beam measured during machine commissioning. The thickness of the small foil in secondary scatter affected the beam model dominantly and was fine tuned to achieve the best agreement with commissioning data. Validation of the MC beam modeling was performed by comparing the calculated PDDs and profiles with EBT‐XD radiochromic film measurements for various combinations of applicators and inserts. Results: The nominal 9 MeV electron FLASH beams were best represented by a Gaussian energy spectrum with mean energy of 9.9 MeV and variance (σ) of 0.2 MeV. Good agreement between the MC beam model and commissioning data were demonstrated with maximal discrepancy < 3% for PDDs and profiles. Hundred percent gamma pass rate was achieved for all PDDs and profiles with the criteria of 2 mm/3%. With the criteria of 2 mm/2%, maximum, minimum and mean gamma pass rates were (100.0%, 93.8%, 98.7%) for PDDs and (100.0%, 96.7%, 99.4%) for profiles, respectively. Conclusions: A validated MC beam model for the UHDR capable Mobetron is presented for the first time. The MC model can be utilized for direct dose calculation or to generate beam modeling input required for treatment planning systems for FLASH‐RT planning. The beam model presented in this work should facilitate translational and clinical FLASH‐RT for trials conducted on the Mobetron FLASH‐IQ platform. [ABSTRACT FROM AUTHOR]

Background and objectives: To justify the concept of validating conformal versus intensity-modulated approach in the treatment of non-small cell lung cancer (NSCLC). Materials and methods: For 10 patients representative of the spectrum of tumour sizes and locations, two plans were prepared: one with three-dimensional conformal radiation therapy (3DCRT) technique and the other with intensity-modulated radiation therapy (IMRT) technique. Preliminary measurements were performed in static conditions. For each of the field angles considered, the motion kernel was generated to simulate tumour motion trajectories, with the largest amplitude in the cranio-caudal direction of 4, 6, and 8 mm. The measurement results determined the agreement between the planned and measured doses. Results: No statistically significant differences were found between the motion patterns, with the smallest amplitudes for clinical target volume in 3DCRT. For IMRT, the significant differences between 0 mm vs. 6 mm and 0 mm vs. 8 mm amplitudes were found. The motion impact on delivered vs. planned doses had less effect on the oesophagus in 3DCRT compared to that in IMRT. The observed differences were comparable for the heart. Interpretation and conclusions: For maximal amplitudes below 4 mm, the disagreement between planned and delivered doses can be neglected. However, the amplitudes above 5 mm and 7 mm lead to significant changes in IMRT and 3DCRT dose distribution, respectively. [ABSTRACT FROM AUTHOR]