Search

Trade-offs in wood anatomical characteristics reflect different strategies used by trees to deal with water transport in response to variation in environmental conditions. To study vascular strategies for Bornean rainforest trees, we compared water transport-related anatomical characteristics in branch wood between the common tree species Vatica dulitensis (Dipterocarpaceae) from old-growth forest and the common pioneer tree species Macaranga gigantea (Euphorbiaceae) from selectively logged forest. We hypothesised that the vessel traits of the pioneer species would reflect the need to capture and transport resources to support its fast growth rate (resource-acquisitive strategy), while the species of the old-growth forest would display more conservative vessel traits (resource-conservative strategy). We found that M. gigantea had significantly greater vessel area, hydraulically weighted diameter, vessel area to number ratio, and potential hydraulic conductivity than V. dulitensis. These results suggest that vessel traits of the common old-growth species would ensure high hydraulic safety during occasional drought when soil moisture is limited, while the common species of selectively logged forest possesses an efficient water transport system but its vessels would confer lower hydraulic safety during drought conditions. These contrasting vascular strategies highlight the potential for divergent responses of species of Bornean forest trees to future climatic extremes.

Conservation planning tends to focus on protecting species' ranges or landscape connectivity but seldom both-particularly in the case of diverse taxonomic assemblages and multiple planning goals. Therefore, information on potential trade-offs between maintaining landscape connectivity and achieving other conservation objectives is lacking. We developed an optimization approach to prioritize the maximal protection of species' ranges, ecosystem types, and forest carbon stocks, while also including habitat connectivity for range-shifting species and dispersal corridors to link protected area. We applied our approach to Sabah, Malaysia, where the state government mandated an increase in protected-area coverage of approximately 305,000 ha but did not specify where new protected areas should be. Compared with a conservation planning approach that did not incorporate the 2 connectivity features, our approach increased the protection of dispersal corridors and elevational connectivity by 13% and 21%, respectively. Coverage of vertebrate and plant species' ranges and forest types were the same whether connectivity was included or excluded. Our approach protected 2% less forest carbon and 3% less butterfly range than when connectivity features were not included. Hence, the inclusion of connectivity into conservation planning can generate large increases in the protection of landscape connectivity with minimal loss of representation of other conservation targets.Incorporación de la Conectividad a la Planeación de la Conservación para la Representación Óptima de Especies Múltiples y Servicios Ambientales Resumen Las tendencias de planeación de la conservación tienden a enfocarse en la protección de la distribución geográfica de las especies o en la conectividad de paisajes, pero rara vez se enfocan en ambas - particularmente para el caso de los ensamblajes taxonómicos y las metas múltiples de planeación. Por lo tanto, hay carencias en la información sobre las compensaciones potenciales entre mantener la conectividad de los paisajes y alcanzar otros objetivos de conservación. Desarrollamos una estrategia de optimización para priorizar la protección máxima de la distribución de las especies, los tipos de ecosistemas y los stocks de carbono de los bosques, a la vez que incluimos la conectividad del hábitat para las especies que modifican su distribución y los corredores de dispersión para conectar el área protegida. Aplicamos nuestra estrategia en Sabah, Malasia, en donde el gobierno estatal ordenó un incremento de ∼305, 000 ha en la cobertura de áreas protegidas sin especificar la ubicación de las nuevas áreas protegidas. En comparación con una estrategia de planeación de la conservación que no incorporó las dos características de la conectividad, nuestra estrategia incrementó la protección de los corredores de dispersión y la conectividad altitudinal en un 13% y 21% respectivamente. La cobertura de la distribución de las especies de plantas y vertebrados y de los tipos de bosque fue la misma con o sin la inclusión de la conectividad. Nuestra estrategia protegió 2% menos del carbono forestal y 3% menos de la distribución de mariposas que cuando no se incluyeron las características de conectividad en la estrategia. Por lo tanto, incluir a la conectividad en la planeación de la conservación puede generar grandes incrementos en la protección de la conectividad del paisaje con una pérdida mínima de representación para los demás objetivos de conservación.

Documenting the scale and intensity of fine-scale spatial genetic structure (FSGS), and the processes that shape it, is relevant to the sustainable management of genetic resources in timber tree species, particularly where logging or fragmentation might disrupt gene flow. In this study we assessed patterns of FSGS in three species of Dipterocarpaceae (Parashorea tomentella, Shorea leprosula and Shorea parvifolia) across four different tropical rain forests in Malaysia using nuclear microsatellite markers. Topographic heterogeneity varied across the sites. We hypothesised that forests with high topographic heterogeneity would display increased FSGS among the adult populations driven by habitat associations. This hypothesis was not supported for S. leprosula and S. parvifolia which displayed little variation in the intensity and scale of FSGS between sites despite substantial variation in topographic heterogeneity. Conversely, the intensity of FSGS for P. tomentella was greater at a more topographically heterogeneous than a homogeneous site, and a significant difference in the overall pattern of FSGS was detected between sites for this species. These results suggest that local patterns of FSGS may in some species be shaped by habitat heterogeneity in addition to limited gene flow by pollen and seed dispersal. Site factors can therefore contribute to the development of FSGS. Confirming consistency in species’ FSGS amongst sites is an important step in managing timber tree genetic diversity as it provides confidence that species specific management recommendations based on species reproductive traits can be applied across a species’ range. Forest managers should take into account the interaction between reproductive traits and site characteristics, its consequences for maintaining forest genetic resources and how this might influence natural regeneration across species if management is to be sustainable. ISSN:1932-6203

The lowland tropical forests of Southeast Asia are dominated by a single family of canopy and emergent trees, the Dipterocarpaceae. The seeds of dipterocarps are gravity or gyration dispersed. Short distance and limited seed dispersal via these mechanisms result in the aggregation of related individuals and strong fine-scale spatial genetic structure (FSGS). In logged and fragmented forests, where gene flow may be disrupted, tree species with strong FSGS are predicted to exhibit increased inbreeding, which consequently can erode genetic diversity, fitness and might limit the potential for natural regeneration of dipterocarps. Developing a set of indirect operational indicators for FSGS provides a solid basis for informing conservation and management of forest genetic resources in logged forests. Our main objective was to use an information theoretic approach to identify these indicators of FSGS in dipterocarps. We quantify FSGS in 19 dipterocarp species across four forest sites in Malaysian Borneo, India and the Seychelles. We detected FSGS in 15 (79%) of our study species, most of which displayed significant inbreeding. Our results suggest that wood density and flower size offer useful indicators of FSGS. We propose some simple guidelines to allow forest managers to account for FSGS when planning approaches to maintain genetically diverse stands in logged dipterocarp forests. The integration of improved understanding of genetic processes is essential for conserving forest tree genetic resources and ensuring the resilience of logged forests.

Developing a robust and cost-effective method for accurately estimating tropical forest’s carbon pool over large area is a fundamental requirement for the implementation of Reducing Emissions from Deforestation and forest Degradation (REDD+). This study aims at examining the independent and combined use of airborne LiDAR and Landsat 8 Operational Land Imager (OLI) data to accurately estimate the above-ground biomass (AGB) of primary tropical rainforests in Sabah, Malaysia. Thirty field plots were established in three types of lowland rainforests: alluvial, sandstone hill and heath forests that represent a wide range of AGB density and stand structure. We derived the height percentile and laser penetration variables from the airborne LiDAR and calculated the vegetation indices, tasseled cap transformation values, and the texture measures from Landsat 8 OLI data. We found that there are moderate correlations between the AGB and laser penetration variables from airborne LiDAR data (r = −0.411 to −0.790). For Landsat 8 OLI data, the 6 vegetation indices and the 46 texture measures also significantly correlated with the AGB (r = 0.366–0.519). Stepwise multiple regression analysis was performed to establish the estimation models for independent and combined use of airborne LiDAR and Landsat 8 OLI data. The results showed that the model based on a combination of the two remote sensing data achieved the highest accuracy (R2adj = 0.81, RMSE = 17.36%) whereas the models using Landsat 8 OLI data airborne LiDAR data independently obtained the moderate accuracy (R2adj = 0.52, RMSE = 24.22% and R2adj = 0.63, RMSE = 25.25%, respectively). Our study indicated that texture measures from Landsat 8 OLI data provided useful information for AGB estimation and synergistic use of Landsat 8 OLI and airborne LiDAR data could improve the AGB estimation of primary tropical rainforest.

Unprecedented deforestation and forest degradation in recent decades have severely depleted the carbon storage in Borneo. Estimating aboveground biomass (AGB) with high accuracy is crucial to quantifying carbon stocks for Reducing Emissions from Deforestation and Forest Degradation-plus implementation (REDD+). Airborne Light Detection and Ranging (LiDAR) is a promising remote sensing technology that provides fine-scale forest structure variability data. This paper highlights the use of airborne LiDAR data for estimating the AGB of a logged-over tropical forest in Sabah, Malaysia. The LiDAR data was acquired using an Optech Orion C200 sensor onboard a fixed wing aircraft. The canopy height of each LiDAR point was calculated from the height difference between the first returns and the Digital Terrain Model (DTM) constructed from the ground points. Among the obtained LiDAR height metrics, the mean canopy height produced the strongest relationship with the observed AGB. This single-variable model had a root mean squared error (RMSE) of 80.02 t ha-1 or 22.31% of the mean AGB, which performed exceptionally when compared with recent tropical rainforest studies. Overall, airborne LiDAR did provide fine-scale canopy height measurements for accurately and reliably estimating the AGB in a logged-over forest in Sabah, thus supporting the state's effort in realizing the REDD+ mechanism.

The stem allometry (tree height versus stem diameter) of four tree species found in a North Queensland rainforest was examined. These species were dicotyledonous trees, two of which were classed as early successional species and two as later successional species. No significant differences (P > 0.05) were found in the stem allometry of dicoty¬ledonous trees of the same successional status. However, significant differences (P < 0.05) in stem allometry were found when comparing species of different successional status. Later successional species, but not early successional species, were found to be "elastically similar" to a theoretical buckling limit. The relationship between stability safety factors and tree height indicated that both early and later successional species have large buckling safety margins when of low stature. At medium statures (subcanopy), early successional species display a moderate buckling safety margin while later successional species exhibited their lowest buckling safety margin. At tall statures (canopy and above), early successional species exhibited their lowest buckling safety margin while later successional species had moderate buckling safety margins. Stem allometry may be influenced by a tree's life-span, wood density, and environmental conditions in its crown region.