Search

This study investigates an improvement in memory characteristics through depositing an In2O3 layer as an oxygen ion reservoir in the switching layer (SL) of resistive random access memory (RRAM). The deposition of In2O3, denoted as Pt/HfO2/In2O3/TiN device, provides better memory characteristics including lower forming voltage (VF), set/reset voltage (VSET/VRESET), larger memory window, and higher resistances with higher uniformity at low resistance state (LRS) and high resistance state (HRS), compared to the devices without the In2O3 deposition, denoted as Pt/HfO2/TiN device. The conduction mechanisms, verified through fitting current–voltage (I - V) curves, are consistent with the results of a varied temperature I - V experiment. Finally, a physical model is proposed to explain our observations. [ABSTRACT FROM AUTHOR]

This article explains the difference in the reset processes between single RRAM and 1T1R RRAM structures. In the single RRAM, as the reset voltage increases, the off-state resistance increases. This is a normal RRAM operation. However, in the 1T1R structure, the reset voltage increases while the OFF-state resistance does not increase. This may be caused by either current or voltage being insufficient to switch the RRAM to its higher resistance state. The measurements of real voltage indicate that the insufficient voltage is in fact the main cause. For the 1T1R RRAM structure, if it is to be reset to a higher resistance state, it is best done by increasing the gate voltage to increase the OFF-state resistance. Therefore, we provide a method to reduce the misjudgment in the array, and it would be beneficial for the development of high-density memory. [ABSTRACT FROM AUTHOR]