Search

Purpose: The purpose of this study was to investigate the in vivo kinematics of the same femoral design mechanically aligned posterior-stabilised (PS) total knee arthroplasty (TKA) with either fixed-bearing (FB) or mobile-bearing (MB) inlay, implanted by the same surgeon, using model-based dynamic radiostereometric analysis (RSA). The hypothesis of the present study was that the MB design would show wider axial rotation than the FB design, without affecting the clinical outcomes. Materials and methods: A cohort of 21 non-randomised patients (21 DePuy Attune PS-FB) was evaluated by dynamic RSA analysis at a minimum 9-month follow-up, while performing differently demanding daily living activities such as sit to stand (STS) and deep knee lunge (DKL). Kinematic data were compared with those of a cohort of 22 patients implanted with the same prosthetic design but with MB inlay. Anterior–posterior (AP) translations, varus–valgus (VV) and internal–external (IE) rotations of the femoral component with respect to the tibial baseplate were investigated. Translation of medial and lateral compartment was analysed using the low point method according to Freeman et al. Questionnaires to calculate objective and subjective clinical scores were administered preoperatively and during follow-up visit by the same investigator. Results: The FB TKA design showed lower AP translation during STS (6.8 ± 3.3 mm in FB vs 9.9 ± 3.7 mm in MB, p = 0.006*), lower VV rotation (1.9 ± 0.8° in FB vs 5.3 ± 3.3° in MB, p = 0.005) and lower IE rotation (2.8 ± 1.1° in FB vs 9.5 ± 4.3° in MB, p = 0.001) during DKL than the mobile-bearing TKA design. Posterior-stabilised FB group showed significant lower translation of the low point of the medial compartment than the MB group (p = 0.008). The percentage of patients performing medial pivot in the FB group was higher compared to MB group in the examined motor tasks. No significant differences in post-operative range of motion (117° ± 16° for FB group and 124° ± 13° for MB group) and in clinical outcomes emerged between the two cohort. Conclusions: The FB and MB designs differed in AP translations, VV rotations and IE rotations of the femoral component with respect to the tibial component in STS and DKL. Furthermore, FB cohort reported a significant higher percentage of medial pivot with respect to MB cohort. Despite this, no differences in clinical outcomes were detected between groups. Both designs showed stable kinematics and represent a viable option in primary TKA. Level of evidence: Prospective cohort study, II. [ABSTRACT FROM AUTHOR]

Purpose: Which total knee arthroplasty (TKA) design represents the better solution to restore a correct knee biomechanics is still debated. The aim of this study was to compare posterior stabilized (PS) and cruciate retaining (CR) version of the same TKA design (femoral component with an anatomic sagittal radius-J-curve design) by the use of dynamic Roentgen stereophotogrammetric analysis (RSA). The hypothesis was that the two models influence differently in vivo knee kinematic.Methods: A cohort of 16 randomly selected patients was evaluated 9 months after surgery: Zimmer PERSONA® was implanted, eight with CR design and eight with PS design. The kinematic evaluations were performed using a Dynamic RSA (BI-STAND DRX 2) developed in our Institute, during the execution of the sit-to-stand motor task. The motion parameters were obtained using the Grood and Suntay decomposition and the low-point kinematics methods.Results: PS TKA lateral femoral compartment had a wider anterior translation (17 ± 2 mm) than the medial one (11 ± 2 mm), while the two compartments of CR TKA showed a similar anterior translation (medial: 9 ± 2 mm/lateral: 11 ± 2 mm). T test for comparison between CR and PS TKA of antero-posterior translation showed a statistically significant difference (p < 0.05) in the flexion range between 15° and 40°. The CR prosthesis did not anteriorly translate during flexion. The PS design translated anteriorly showing a roll-forward mechanism during extension from 80° to 18° of flexion and a posterior translation from 18° to 0°. The same significant differences (p < 0.05) between the PS and CR groups were found comparing the low-point positions of the femoral condyles in the range of flexion between 25° and 40° for the medial compartment and between 15° and 25° for the lateral compartment.Conclusions: Dynamic RSA was able to investigate for the first time in vivo the kinematic behaviour of PS and CR version of the same TKA J-curve design. PS type showed a medial pivot during sit-to-stand motion task, while the CR type showed a cylindrical movement. Further studies are needed to evaluate the impact of different TKA designs on clinical results.Level Of Evidence: IV. [ABSTRACT FROM AUTHOR]

Purpose: To assess, using model-based dynamic radiostereometric analysis (RSA), the biomechanical behaviour of a new design posterior-stabilized (PS) fixed-bearing (FB) total knee arthroplasty (TKA) in vivo while patients performing two common motor tasks. The hypothesis was that model-based dynamic RSA is able to detect different behaviour of the implant under weight-bearing and non-weight-bearing conditions.Methods: A cohort of 15 non-consecutive patients was evaluated by dynamic RSA 9 months after TKA implantation. The mean age of patients was 73.4 (65-72) years. The kinematic evaluations were performed using an RSA device (BI-STAND DRX 2) developed in our Institute. The patients were asked to perform two active motor tasks: sit-to-stand in weight-bearing condition; range of motion (ROM) while sitting on the chair. The motion parameters were evaluated using the Grood and Suntay decomposition and the low-point kinematics methods.Results: The dynamic RSA evaluation showed a significant difference (p < 0.05) between the biomechanical behaviour of the prosthesis during the two motor tasks. When subjected to the patient weight (in the sit-to-stand) the low point of the medial compartment had a shorter motion (5.7 ± 0.2 mm) than the lateral (11.0 ± 0.2 mm). This realizes a medial pivot motion as in the normal knee. In the ROM task, where the patient had no weight on the prosthesis, this difference was not present: the medial compartment had a displacement of 12.7 ± 0.2 mm, while the lateral had 17.3 ± 0.2 mm.Conclusions: Model-based RSA proved to be an effective tool for the evaluation of TKA biomechanics. In particular, it was able to determine that the fixed-bearing posterior-stabilized TKA design evaluated in this study showed a medial pivoting movement under weight-bearing conditions that was not present when load was not applied. Under loading conditions what drives the pattern of movement is the prosthetic design itself. By the systematic use of this study protocol future comparisons among different implants could be performed, thus contributing significantly to the improvement of TKA design.Level Of Evidence: IV. [ABSTRACT FROM AUTHOR]

Background: There are few published studies with very long-term follow-up of combined intra- and extra-articular anterior cruciate ligament (ACL) reconstruction. Purpose: To analyze clinical and radiographic outcomes of over-the-top ACL reconstruction plus extra-articular lateral tenodesis with autologous hamstrings at minimum 20-year follow-up. Study Design: Case series; Level of evidence, 4. Methods: Of 60 originally eligible patients who underwent over-the-top ACL reconstruction with double-stranded hamstring tendon (leaving intact graft tibial insertions) and extra-articular lateral plasty (performed with the remnant part of tendons), 52 were prospectively evaluated at a minimum 20-year follow-up (mean follow-up, 24 years; 41 men, 11 women; mean age at time of surgery, 25.5 ± 7.6 years). Twenty-nine patients were available for prospective evaluations: clinical (Lysholm, Tegner, and objective International Knee Documentation Committee [IKDC]), instrumented (KT-2000), and radiographic (standard, long-standing, and Merchant views). Subjective KOOS (Knee injury and Osteoarthritis Outcome Score) and objective inertial sensor pivot-shift analysis (KiRA) were carried out at final follow-up. Twenty-three patients were investigated by phone interview for subjective Tegner score and documented complications, rerupture, or revision surgery. Results: At final follow-up, mean Lysholm score was 85.7 ± 14.6; median Tegner score, 4 (range, 3-5); sport activity resumption, 86.2%; and objective IKDC score, good or excellent in 86% of patients (31%, A; 55%, B). Only 3 of 26 patients (12%) had >5-mm manual maximum KT-2000 side-to-side difference. KiRA system documented positive pivot-shift (>0.9-m/s2 tibial acceleration side-to-side difference) in these 3 of 26 patients (12%). Statistically significant changes were as follows: decrease in Tegner score from 7 (range, 6-8) at 5-year follow-up to 4 (range, 3-5) at 10 years (P < .0001) and decrease in Lysholm score from 96.1 ± 7.3 at 10-year follow-up to 85.7 ± 14.6 at 20 years (P = .0003). Radiographic evaluation demonstrated significant difference of medial joint space between injured and healthy knees in patients with concomitant medial meniscectomy (n = 8, 3.2 ± 0.6 vs 5.0 ± 1.8 mm, P = .0114). No significant differences were reported regarding lateral or patellofemoral joint space. One patient (2%) experienced rerupture, with 3 of 52 (5.8%) having a contralateral ACL injury (excluded from KT-2000 and radiographic evaluations). Overall, 4 of 29 clinical failures (objective IKDC, KT-2000) and 1 rerupture among 52 patients were registered at final follow-up. Conclusion: Studied surgical technique demonstrated good results in laxity control at 20-year minimum follow-up. The lateral extra-articular plasty associated with ACL reconstruction did not generate lateral knee or patellofemoral osteoarthritis. The factor increasing osteoarthritis was meniscectomy. [ABSTRACT FROM AUTHOR]

Background: Prior attempts to quantify the pivot-shift examination have been too invasive or impractical for clinical use. A noninvasive method for quantifying rotatory knee laxity is needed. Hypothesis: Greater quantitative measurements of rotatory knee laxity (both of the involved knee as well as compared with the contralateral healthy knee) are associated with an increasing clinical pivot-shift grade. Study Design: Cross-sectional study; Level of evidence, 3. Methods: A total of 103 patients undergoing anatomic single-bundle anterior cruciate ligament (ACL) reconstruction at 4 international centers underwent a standardized pivot-shift test preoperatively on both knees while anesthetized. Clinical grading of the pivot shift was performed according to the International Knee Documentation Committee (IKDC) knee ligament rating system. Two different quantitative technologies were used to measure rotatory knee laxity: an inertial sensor and an image analysis were independently used to measure tibial acceleration and lateral compartment translation, respectively, during the pivot-shift test. Patients were dichotomized to “high-grade” (abnormal and severely abnormal) or “low-grade” (normal and nearly normal) rotatory knee laxity groups based on the clinical pivot-shift test result of the involved side. Tibial acceleration and lateral compartment translation of the involved knee and the side-to-side difference between the involved and contralateral knees were separately compared between the high- and low-grade rotatory knee laxity groups utilizing t tests; significance was set at P < .05. Results: Forty-three patients were in the low-grade rotatory knee laxity group, and 60 patients were in the high-grade rotatory knee laxity group. Patients in the high-grade knee laxity group had significantly higher lateral compartment translation as measured with the image analysis (involved knee: 3.8 ± 2.3 mm; side-to-side difference: 2.5 ± 2.4 mm) compared with patients in the low-grade group (involved knee: 2.0 ± 1.4 mm; side-to-side difference: 1.4 ± 1.5 mm) (both P < .01). As measured with the inertial sensor, tibial acceleration for patients in the high-grade group was significantly higher (involved knee: 7.2 ± 5.3 m/s2; side-to-side difference: 4.2 ± 5.4 m/s2) compared with patients in the low-grade group (involved knee: 4.2 ± 1.6 m/s2; side-to-side difference: 1.2 ± 1.2 m/s2) (both P < .01). Conclusion: The inertial sensor and image analysis techniques were able to detect differences between low- and high-grade pivot-shift test results. A quantitative assessment of the pivot-shift test could augment the diagnosis of an ACL injury and improve the ability to detect changes in rotatory knee laxity over time. [ABSTRACT FROM AUTHOR]

To quantitatively describe the kinematic behaviour of the hip joint with particular interest in the contribution of the periarticular soft tissues to the stability. To quantitatively assess the sealing function of the acetabular labrum of an intact labrum, the effect of a labral-chondral separation and different surgical approaches. The biomechanics of the joint during specific clinical examinations was also assessed.~Purpose~All the kinematics tests, manually performed, have been acquired using a navigation systems. For the first part of the study, 4 hemi-corpse specimens were evaluated with the hip in 36 different positions with all the soft tissues intact, after removal of skin and muscles and after partial capsulectomy. During the second and the third part of the analysis 8 fresh frozen hips were analysed. They were tested during 3 different positions used for femeroacetabular impingement (FAI) diagnosis, during pivoting motion and distraction test. Contact area between acetabulum and femoral head, range of movement (RoM) and hip joint centre (HJC) displacement were evaluated.~Methods~Femoral head displacement occured in all 3 directions and increased as more tissue was removed. Considering both pivoting motion and distraction test there was an increase of the HJC displacement after labral tear. Analogously, the tested surgical approaches showed different results compared to intact condition. Our analysis confirmed that the hip position with Hyperextension-External Rotation is specific for the analysis of the posteriorsuperior region of the acetabulum.~Results~The study showed that hip joint does not act as a true ball-and-socket joint and the femoral head anatomical displacement is strongly affected by the removal of periarticular soft tissues, labral repair as well as labrectomy.~Conclusions [ABSTRACT FROM AUTHOR]

The article presents the in vivo kinematic study which compared the effectiveness of an anatomic double-bundle (ADB) and a nonatomic double-bundle (NADB) anterior cruciate ligament (ACL) reconstruction methods. In the study, the objective International Knee Documentation Committee (IKDC) score was used to evaluate the subjects. Based on the results, the two methods showed no substantial quantitative difference in isolated anterior-posterior laxity and pivot-shift phenomenon at time zero.

Even if pivot-shift (PS) test has been clinically used to specifically detect anterior cruciate ligament (ACL) injury, the main problem in using this combined test has been yet associated with the difficulty of clearly quantifying its outcome. The goal of this study was to describe an original non-invasive methodology used to quantify PS test, highlighting its possible clinical reliability. The method was validated on 66 consecutive unilateral ACL-injured patients. A commercial triaxial accelerometer was non-invasively mounted on patient's tibia, the corresponding 3D acceleration was acquired during PS test execution and a set of specific parameters were automatically identified on the signal to quantify the test. PS test was repeated three times on both injured and controlateral limbs. Reliability of the method was found to be good (mean intra-rater intraclass correlation coefficient was 0.79); moreover, we found that ACL-deficient knees presented statistically higher values for the identified parameters – than the controlateral healthy limbs, averagely reporting also large effect size. [ABSTRACT FROM PUBLISHER]