Search

This paper deals with the protection of critical loads from voltage-related power quality issues using a dynamic voltage restorer (DVR). A generalized control algorithm based on instantaneous space phasor and dual $P$ - $Q$ theory has been proposed to generate the instantaneous reference voltages to compensate the load voltages with direct power flow control. The proposed algorithm adapts energy-optimized series voltage compensation, which results in a reduction of energy storage requirement. The proposed DVR control scheme can support the load from voltage-related power quality issues irrespective of the load current profile. Each leg of the three-phase three-leg split capacitor inverter is used to inject series compensation voltage in respective phases of the system. Model-based computer simulation studies and real-time experimental results validate the effectiveness of the proposed control algorithm. [ABSTRACT FROM AUTHOR]

A distribution static compensator (DSTATCOM) is used for load voltage regulation, and its performance mainly depends upon the feeder impedance and its nature (resistive, inductive, stiff, nonstiff). However, a study for analyzing voltage regulation performance of DSTATCOM depending upon network parameters is not well defined. This paper aims to provide a comprehensive study of design, operation, and flexible control of a DSTATCOM operating in voltage control mode. A detailed analysis of the voltage regulation capability of DSTATCOM under various feeder impedances is presented. Then, a benchmark design procedure to compute the value of external inductor is presented. A dynamic reference load voltage generation scheme is also developed, which allows DSTATCOM to compensate load reactive power during normal operation, in addition to providing voltage support during disturbances. Simulation and experimental results validate the effectiveness of the proposed scheme. [ABSTRACT FROM PUBLISHER]

This paper proposes an improved performance interactive distribution static compensator (DSTATCOM) to address the limitations of conventional current control mode (CCM) and voltage control mode (VCM) operations. The proposed interactive scheme provides smooth transfer of modes of operation while remaining connected in the distribution system. In normal operation, the DSTATCOM operates in CCM to make source currents balanced, sinusoidal, and at a unity power factor. During voltage disturbances, the CCM operation cannot improve load voltage. In that case, DSTATCOM operation is changed to VCM, which maintains a constant voltage across the sensitive loads. Hence, this interactive DSTATCOM ensures continuous, flexible, and robust operation of the load. Moreover, the filter current requirements are reduced in the proposed scheme, which reduces the losses in the filter and feeder, improves inverter efficiency, and requires a reduced-rating inverter for sag mitigation. The principle of operation and control for both operating modes is analyzed. The detailed process of the flexible transfer between the two modes is derived. Deadbeat predictive control algorithms for CCM as well as VCM operation are developed for fast operation during mode transfers. The performance of the proposed scheme is validated by both simulation and experimental results. [ABSTRACT FROM PUBLISHER]

The unified power quality conditioner (UPQC) is a custom power device, which mitigates voltage and current-related PQ issues in the power distribution systems. In this paper, a UPQC topology for applications with non-stiff source is proposed. The proposed topology enables UPQC to have a reduced dc-link voltage without compromising its compensation capability. This proposed topology also helps to match the dc-link voltage requirement of the shunt and series active filters of the UPQC. The topology uses a capacitor in series with the interfacing inductor of the shunt active filter, and the system neutral is connected to the negative terminal of the dc-link voltage to avoid the requirement of the fourth leg in the voltage source inverter (VSI) of the shunt active filter. The average switching frequency of the switches in the VSI also reduces, consequently the switching losses in the inverters reduce. Detailed design aspects of the series capacitor and VSI parameters have been discussed in the paper. A simulation study of the proposed topology has been carried out using PSCAD simulator, and the results are presented. Experimental studies are carried out on three-phase UPQC prototype to verify the proposed topology. [ABSTRACT FROM PUBLISHER]

Abstract: This paper proposes the effective utilization of unified power quality conditioner (UPQC) for interconnecting the PV modules to the grid using power angle control (PAC) method. A shunt active power filter (APF) is used to evacuate the power from the photovoltaic module in addition to compensating the current harmonics, load unbalance and reactive power. To accomplish this the series APF in the UPQC is used for supplying a part or whole reactive power required by the load in addition to compensating the sag, swell, supply voltage unbalance and distortions. This is made possible by controlling the phase angle and magnitude of series injected voltage called power angle control method. The reactive power and voltage compensation technique introduces a phase shift between the load terminal voltage and source voltage. The transient due to sudden phase shift is minimized using step by step introduction of series compensation voltage. The proposed method effectively utilizes the shunt APF and series APF in the UPQC for interconnecting the PV module to the grid. The simulation results from MATLAB/SIMULINK are discussed to validate the developed method. [Copyright &y& Elsevier]