Search

In this article, an approach is proposed for the online diagnostic analysis of power electronic converters utilizing real-time, probabilistic digital twinning. Under this approach, a digital twin (DT) of a power converter is defined as a real-time, probabilistic simulation model with stochastic (random) variables, developed using generalized polynomial chaos expansion. The DT models are partitioned in perspective of control layers for power converter subsystems in the approach, with emphasis on the application and converter control layers. Real-time executed solvers of these divided probabilistic DT models are embedded into power converter controllers running on field programmable gate array (FPGA) computing devices. Using a monitoring system, the real-time probabilistic DTs at each control layer and the corresponding physical twins of the power converter are compared by the controllers to determine if the power converter is operating within probable behavior. Knowing the large computational cost of probabilistic modeling, the resource usage and timing of real-time DT solvers on modern FPGAs is reported for common power electronic converter topologies, showing the approach is feasible and able to perform probabilistic real-time simulation of smaller power converters in perspective of application and converter control layers using ≤ 2 μs time steps, with as low as 70 ns steps; while staying embeddable within FPGA-based controllers. To highlight the capabilities of the proposed approach, a case study is presented using a probabilistic DT in the application layer controller of a pair of converters to comparatively monitor their behavior and corresponding controller action under hardware-in-the-loop testing. [ABSTRACT FROM AUTHOR]

In this paper we present a solution for real-time multi-FPGA simulation of energy conversion systems based on the Latency-Based Linear Multistep Compound (LB-LMC) simulation approach. The approach relies on a nodal decomposition approach derived from multiport network analysis, and fast parallel communication between Field Programmable Gate Array (FPGA) devices. The results presented in this paper –using a microgrid example– demonstrate how the developed real-time platform overcame the resource scalability limit of single FPGA solvers while achieving a time step size of 100 nanoseconds. [ABSTRACT FROM AUTHOR]

In this paper, we demonstrate how latency insertion method (LIM) can be used for real-time simulation of high switching frequency power electronics systems and how this approach can be implemented for scalable Field Programmable Gate Array (FPGA) execution. We first present a summary of the LIM and how this method can be developed into a solver for high-performance FPGA execution. We then present how common power electronics topologies—buck and boost—can be modeled using the LIM approach, followed by how the LIM model of a three-phase dc/ac converter is created. Afterward, we demonstrate the accuracy of the developed FPGA solver through a set of power electronic system examples, with each example compared with near ideal results of same example provided by a traditional electromagnetic transient type solver. We complete the paper analyzing the scalability of the proposed approach on FPGA devices, both in terms of achievable time step as well as of resource usage. [ABSTRACT FROM AUTHOR]

In this paper, we present a scalable approach for real-time simulation of ship power systems with high-frequency power electronics converters (100–200 kHz). The proposed approach is based on the latency-based linear multistep compound method and relies on field-programmable gate array (FPGA) execution. Several examples of increasing dimension and complexity are used to evaluate the scalability—both of in terms of computational delay and of resources usage—of the proposed approach. Real-time execution with a 50 ns time step is achieved for all the examples considered. [ABSTRACT FROM PUBLISHER]

We define here a new parallel simulation method designed for real-time execution. This method is highly parallelizable and scalable, and the simulation execution time is fully predictable, which is very important for real-time execution. The stability conditions for the method are defined. Furthermore, we show how to define appropriate flow variable injections so that this method can be extended to multiphysic applications and how to implement multirate time step in the defined method. Finally, we present simulation tests that validate the presented method. [ABSTRACT FROM AUTHOR]

This work introduces a multiphysics test bed which supports the testing of renewable energy systems in the context of home energy systems (HESs). The test bed, based on power-hardware-in-the-loop (PHIL) technology, allows for testing renewable energy systems and HESs in a holistic way. Homes, as the melting pot of different forms of energy, are one of the key enablers for the smart grid technology. The interface of different energy domains is the main propeller for innovation and development of new technologies. The test bed presented in this work comprises thermal, hydraulic, communication, and electrical interfaces, enabling a variety of testing scenarios. The modular structure of the test bed allows for a very flexible setup for analyzing different kinds of HESs. [ABSTRACT FROM PUBLISHER]