Search

The objective of this article is to describe a new family of microwave bandpass filters in the rectangular waveguide based on resonant apertures, which can be used to implement both single- and dual-band transfer functions. The use of capacitive stubs and a staircase configuration is also discussed in order to enhance the out-of-band response and the selectivity of the filter with respect to the state of the art. Finally, simulations are compared with measured results, showing very good agreement, thereby fully validating both the new filter topologies and the design procedure. [ABSTRACT FROM AUTHOR]

The objective of this article is to describe the design of a new family of wideband filters in a rectangular waveguide based on hybrid couplings and a staircase configuration. The use of E-plane T-junctions and E-plane folded structures is also discussed, in order to enhance the out-of-band response and the selectivity of the filter with respect to the current state of the art. The design of several hybrid filter prototypes is discussed in detail, including manufacturing sensitivity and high-power analysis. Finally, simulations and measurements for an eight-pole filter prototype are also compared, showing very good agreement, thereby fully validating both the design procedure and the new filter topology that we propose. [ABSTRACT FROM AUTHOR]

In this article, we present a novel bandpass filter based on dual-mode resonators. The dual-mode operation is based on integrated coaxial and rectangular waveguide cavities. Furthermore, we also discuss a systematic design procedure for the selection of the dimensions of the various constituent elements of the filter, which is based on the well-known aggressive space mapping technique. The design of a five-pole bandpass filter operating in the X-band is discussed in detail, including the measured data. The comparison between simulations and measurement shows very good agreement, thereby fully validating both the new filter structure and the design procedure. [ABSTRACT FROM AUTHOR]

The objective of this paper is to use electromagnetic-based computer-aided design (CAD) tools to investigate the maximum tuning range of channel filters, typically used in satellite payloads. Both circular and rectangular waveguide technologies are investigated. The results of the investigation show that single-mode rectangular waveguide implementations offer substantially wider tuning range, as opposed to classical dual-mode circular waveguide implementations. In addition to simulations, measurements are also presented indicating very good agreement with theory, thereby fully validating the CAD procedure. [ABSTRACT FROM PUBLISHER]

The design and physical implementation of hybrid folded rectangular waveguide filters providing multiple transmission zeros (TZs) below the passband are considered in this paper. These structures offer great flexibility to locate the TZs in a wide frequency range. Different implementations have been considered, each one offering certain advantages in terms of ease of manufacture, number of TZs, and their separation from the passband. A simple design procedure is also described. Measurements of a manufactured five-pole filter prototype and simulations fully validate the novel configurations proposed in this study. [ABSTRACT FROM PUBLISHER]

In this work, we propose an integral equation technique for the efficient analysis of capacitive step discontinuities in rectangular waveguides. The method allows for the inclusion of a number of arbitrarily shaped posts in the vicinity of the step discontinuity. The posts can be both metallic or composed of homogeneous dielectric materials. The integral equation formulation is based on the Surface Equivalence Principle, and uses the parallel plate Green's functions that take into account for the boundary conditions imposed by the host waveguide. The formulation is written in the mixed spatial-spectral frequency domain, and takes advantage of the symmetry of the problem by reducing the original three dimensional (3D) problem to a so called 2.5D problem. The numerical technique has been validated with simulation examples, namely, two lowpass filters that use conducting and dielectric posts of different shapes as impedance inverters. The results provided by the method that we propose have been also compared to those obtained with a commercial full-wave software tool (ANSYS HFSS), showing in all cases a very good agreement with substantially higher computational efficiency. [ABSTRACT FROM AUTHOR]