Search

Non-structural elements play a crucial role in the overall seismic performance of buildings, as has been largely demonstrated in recent earthquakes that have stuck densely populated regions. Therefore, the development of performance-based seismic design and assessment methodologies for non-structural elements is becoming an important research topic within earthquake engineering. A crucial aspect in such methodologies is the accurate prediction of the seismic demands acting on non-structural elements in terms of consistent absolute acceleration and relative displacement floor response spectra for the most common types of structural seismic force resisting systems. Masonry-infilled reinforced concrete frames are one of the most common building typologies in high seismicity regions, such as the Mediterranean region. This study proposes a simplified procedure to estimate consistent absolute acceleration and relative displacement floor response spectra in masonry-infilled reinforced concrete frames based on an existing methodology to estimate consistent floor response spectra in bare reinforced concrete frames. Nine archetype masonry-infilled reinforced concrete buildings with different numbers of storeys and arranged with three masonry infill typologies were considered as case-study archetypes, and were used to validate the proposed methodology using nonlinear time history analyses. The proposed procedure can accurately estimate consistent absolute acceleration and relative displacement floor response spectra for masonry-infilled reinforced concrete buildings that respond both in the elastic and nonlinear ranges for all the non-structural period range. The estimates of floor response spectra given by the proposed procedure are fully consistent with the well-known pseudo-spectral relationship for the entire non-structural period range. [ABSTRACT FROM AUTHOR]

The prevalence of elevated reinforced concrete tanks is widespread across Italian water distribution networks, particularly in flat or low-relief areas. Primarily constructed by the late 1970s, these tanks often suffer from outdated hydraulic efficiency, unable to cope with the increasing urban water demands. With rising construction costs, the economic advantage has shifted toward underground tanks, leading to the decommissioning of many elevated tanks. Despite being obsolete, elevated tanks from the 1960s and 1970s still stand in densely urbanized regions. However, demolishing them may prove less cost-effective than retrofitting to restore their original structural capacity. The widespread presence of these structures, coupled with their susceptibility to decay from weathering and poor maintenance, necessitates a comprehensive assessment of their resilience against gravitational and lateral forces, including seismic activity. Consequently, there is a pressing need to develop an analysis and verification methodology, particularly focused on seismic resilience, tailored to existing elevated tanks. These structures, distinct from conventional reinforced concrete frames, are primarily designed to withstand vertical forces, emphasizing the importance of optimizing material usage in their retrofitting efforts. [ABSTRACT FROM AUTHOR]

Following recent earthquakes, precast buildings exhibited a strong seismic vulnerability related to the presence of closure external panels. The aim of this work is to simulate the seismic response of existing single-storey precast buildings in the case of explicit modelling of external panels. The considered case studies are precast buildings representative of the Italian building stock in the 1970s and 1990s, characterised by two different cladding systems, namely, masonry infills and reinforced concrete precast panels, respectively. The explicit modelling of infills and panels, typically introduced solely as participating masses, provided insights into their actual contribution on the global structural behavior. [ABSTRACT FROM AUTHOR]

The assessment of seismic risk for critical and strategic structures like schools and hospitals remains crucial, even in regions with low seismic activity. Presently, operational school buildings in Sri Lanka are primarily designed to handle gravitational loads without considering capacity-based design principles. Consequently, these structures may lack the necessary lateral resistance to mitigate potential damage or collapse during future earthquakes in Sri Lanka. Hence, conducting seismic risk assessments for such school buildings is imperative to ensure the safety of their occupants. In this research paper, we utilize a recently developed probabilistic seismic hazard map for Sri Lanka to evaluate seismic risk. We employ two nonlinear 3-D finite element models of school buildings created in OpenSees. Incremental Dynamic Analysis is conducted using a well-established set of ground motions, continuing until the structure approaches the point of collapse, to determine the probability of collapse prevention. Subsequently, we develop fragility functions for two limit states, immediate occupancy, and collapse prevention. These fragility curves are then used to compute the probability of exceeding these limit states, aiding in the assessment of the structural safety of the school buildings. A key outcome of this analysis reveals a general trend of increased damage probabilities as the number of stories in the buildings increases despite the distinct structural characteristics of each building. It is also important to note that the disparities between the immediate occupancy and more severe damage cases, such as collapse prevention, are notably pronounced in both two- and three-story school buildings. [ABSTRACT FROM AUTHOR]

Even if precast pre-stressed hollow-core (PPHC) slabs are usually designed as simply supported elements, continuity with the supporting beam may exist when constructed together with a reinforced concrete topping and continuity reinforcing bars. During an earthquake (and possibly other lateral load), this continuity may result in bending moments being induced close to the supports as the buildings sway laterally. The response of precast floors to earthquake-induced demands has been addressed by past research. However, further investigation is required to improve understanding of several aspects of precast floor behaviour either revealed or emphasized by recent earthquakes in New Zealand. This paper proposes a mechanics-based modelling approach for the analysis of PPHC slab-to-beam seating connections. The model has been calibrated against existing test data to predict the failure of a PPHC slab under negative bending moments. The numerical outcomes allow comparison of the moment–drift response, principal tensile stresses, and crack progression during loading. The developed modelling approach will allow future studies to exhaustively investigate all aspects of precast floor behaviour by varying the properties and geometry of the PPHC seating connection. [ABSTRACT FROM AUTHOR]

The structural safety of the infrastructure stock is an important issue in modern seismic performance assessments. Following recent seismic events, reports have highlighted the increased vulnerability of physical infrastructural assets, particularly for many bridges across the Italian road and motorway network. Italy possesses one of the most complex and intricate road systems in Europe which was constructed across irregular territories in terms of plan and elevation and of varying dimensions. As such, a comparative case study is presented herein. This case study aims to characterise the seismic vulnerability of the Vizzana-Zampogna viaduct which is part of the A15 Parma-La Spezia motorway, near the locality of Selva Bocchetto. The viaduct is considered representative of the 1970s construction period. It is approximately 342 m in length and is characterized by a flat curvilinear prestressed concrete deck consisting of 15 spans simply supported on reinforced concrete piers. To better understand the seismic structural response of the individual piers of the viaduct, a "multi-modal" nonlinear static analysis was developed, which allows the effects of sectional stresses relative to the variable load profiles of the single modes to be combined through the quadratic modal combination, and to be compared with the relevant limit state. The research aims to qualitatively identify the piers most vulnerable to seismic action and to study the effects that are induced by introducing variable loads and intensity scenarios of different earthquakes. [ABSTRACT FROM AUTHOR]

Italian reinforced concrete precast industrial buildings featuring frictional beam-to-column connections suffered from severe losses following recent earthquakes. Despite the relevance of this topic, the current literature includes only few works investigating the seismic behaviour of these buildings, the influence of vertical records on their modelled dynamic response, as well as the sensitivity of their seismic fragility to the friction type implemented in-situ. The above considerations imparted momentum to this research. First, a sensitivity analysis was conducted considering both concrete-to-concrete and neoprene-to-concrete friction types, as well as the presence or absence of vertical records in the vulnerability analyses. Within a multiple-stripe analysis framework, a number of nonlinear dynamic analyses were carried out on two precast building models created in OpenSees and assumed to be located in three Italian cities subjected to different hazard levels. Fragility curves related to the limit states of Serviceability Preventing Damage and Life Safety were derived. Then, epistemic uncertainty in the friction type and the influence of vertical records on the fragility curve was treated by employing a logic tree framework, allowing for the derivation of weighted average fragility curves, one per city. While the latter are structure-specific and site-dependent, they may be considered as generic or typological fragility curves, for use by researchers or practitioners who are interested in carrying out a fragility analysis on a reinforced concrete precast industrial building but are not confident on the friction type implemented in-situ and the influence of vertical records for the site and structure at hand. [ABSTRACT FROM AUTHOR]

Robustness of reinforced concrete (RC) structures is an ongoing challenging research topic in the engineering community. During an extreme event, the loss of vertical load-bearing elements can activate large-deformation resisting mechanisms such as membrane and catenary actions in beams and floor slabs of cast-in-situ RC buildings to resist gravity loads. However, few studies have been conducted for precast concrete (PC) buildings, especially focused on the capacity of such structures to withstand column loss scenarios, which mainly relies on connection strength. Additional resistance resource and alternate load paths could be reached via tying systems. In this paper, the progressive collapse resistance of a PC frame building is analyzed by means of nonlinear dynamic finite element analyses focusing on the fundamental roles played by beam-to-column connection strength and tying reinforcement. A simplified modelling approach is illustrated in order to investigate the response of such a structural typology to a number of sudden column-removal scenarios. The relative simplicity of the modelling technique is considered useful for engineering practice, providing new input for further research in this field. [ABSTRACT FROM AUTHOR]

This study provides a framework for investigating the seismic response of an elevated steel water tank within a reinforced concrete chimney, to assist optimal tank placement and analyse different tank geometries. Elevated tank design procedures in different guidelines and codes are adequate for specific cases, none of which meets the exact requirements of this case study, in which the supporting structure mass is large relative to the storage tank. The tank is located at an elevation 63 m below the mid-height of the 200 m chimney, resulting in a different behavior than a simple cantilever. Furthermore, for certain H/R ratios, coupling effects may exist between the fundamental period of the chimney and that of the sloshing wave. An equivalent model is examined that is simple enough yet able to accurately produce the design acceleration, dynamic amplification, damping and torsional effects at the chosen tank location, and to capture site effects. An analysis of the tank at ground level is conducted according to AWWA D100-11. Then, the tank at elevation 63 m is analysed within the framework of three existing methods using code spectra and site-specific spectra. A novel fourth method is then proposed which, contrary to the existing methods, can accurately capture the conditions of this case study by combining the benefits of all methods. The workflow described here can be readily applied to other cases of elevated tanks for which the standard procedures are inadequate. [ABSTRACT FROM AUTHOR]

In the last decades, particular attention has been paid to the seismic vulnerability of existing reinforced concrete buildings designed for gravity loads only. Such buildings, designed before the introduction of capacity design in modern seismic codes, are very common, particularly in seismic prone countries of the Mediterranean area. Due to poor detailing and lacking of capacity design principles, high vulnerability has been highlighted in several past studies. In this article, inadequate seismic response and peculiar damage pattern are investigated by means of shake table tests performed on a 1:2 scaled 3-story infilled prototype. Particular attention is given to the role of beam-column joints and frame-panel interaction. The effectiveness of the EC8-based assessment approach is then evaluated; both linear and nonlinear numerical models, with different levels of sophistication, have been implemented in order to explore their behavioral aspects. [ABSTRACT FROM PUBLISHER]

Shaking-table experiments of relatively large-scale specimens play a fundamental role in deepening our understanding of seismic response of existing structures and verification of numerical models. However, and in apparent contradiction, the preparation of such a dynamic laboratory experiment requires a-priori advanced numerical simulations, necessary to both fine-tune the test specimen properties and calibrate the input motion, as a function of the objectives of the test and capabilities and characteristics of the shaking table. This research thus concerns the development of a fibre-based finite elements model of a halfscale 3D reinforced concrete frame tested under dynamic conditions at the European Centre for Training and Research in Earthquake Engineering (EUCENTRE, Pavia, Italy). Since this reduced-scale specimen is very much based on a full-scale counterpart previously tested under pseudo-dynamic conditions at the European Laboratory for Structural Assessment (ELSA) of the Joint Research Centre (JRC, Ispra, Italy), the first part of the work consisted in verifying that the software tool employed in the numerical simulations was capable of duplicating the pseudo-dynamic real test results. Having successfully met the latter objective, the second part of the work consisted in the attempted numerical simulation of the shaking table tests, with a view to ascertain that the response of the model will be within the envisaged response targets and that the necessary input motion is compatible with the shaking-table characteristics. [ABSTRACT FROM AUTHOR]

The seismic events in Northern Italy, May 2012, have revealed the seismic vulnerability of typical Italian precast industrial buildings. The aim of this paper is to present a seismic fragility model for Italian RC precast buildings, to be used in earthquake loss estimation and seismic risk assessment by comparing two building typologies and three different codes: D.M. 3- 03-1975, D.M. 16-01-1996 and current Italian building code that has been released in 2008. Based on geometric characteristics and design procedure applied, ten different building classes were identified. A Monte Carlo simulation was performed for each building class in order to generate the building stock used for the development of fragility curves trough analytical method. The probabilistic distributions of geometry were mainly obtained from data collected from 650 field surveys, while the material properties were deduced from the code in place at the time of construction or from expert opinion. The structures were modelled in 2D frameworks; since the past seismic events have identified the beam-column connection as the weakest element of precast buildings, two different modelling solutions were adopted to develop fragility curves: a simple model with post processing required to detect connection collapse and an innovative modelling solution able to reproduce the real behaviour of the connection during the analysis. Fragility curves were derived using both nonlinear static and dynamic analysis. [ABSTRACT FROM AUTHOR]

• Validation of a finite element, for moment-axial-shear interaction of RC frames is presented. • Nonlinear force-based finite element formulation is used. • The Disturbed Stress Field Model is used as the constitutive relationship. • Load-deformation responses and failure modes of RC elements are accurately predicted. This paper focuses on a novel finite element formulation which can predict the bending moment-shear force-axial force interaction of reinforced concrete frames and walls, and validate it against 170 experiments available in literature. This distributed plasticity element is established on force-based finite element method, where the relationship between element nodal forces and section forces are exactly known. Hence, element discretization is nonessential when modelling frames using this formulation, reducing the number of degrees of freedom in the numerical model compared to displacement-based formulations. The computations are carried out at four hierarchical levels, namely structure, element, section and fibre. There are two nested iterative procedures at the structure level and the section level. In the existing formulation, these iterative procedures are computationally demanding due to use of initial stiffness matrices. Furthermore, it uses Modified Compression Field Theory at the fibre level, which has inherent drawbacks compared to its more evolved version, the Disturbed stress Field Model. The current study refines the iterative procedures at structure and section levels to fully operate with tangent stiffness matrices to improve the speed of convergence. In addition, the Modified Compression Field Theory is replaced with the Disturbed stress Field Model at the fibre level to compute fibre resisting force for a given fibre deformation, accounting for both averaged behaviour and local crack slip. The novel element is validated by comparing the predicted results with experimental results of 170 tests found in the literature. It is shown that the novel element predicts the load carrying capacity well with an average experimental-to-predicted load carrying capacity ratio of 0.99 and a coefficient of variation of 12.8%. Furthermore, the element can be used to discuss the different failure mechanisms of reinforced concrete frame elements. [ABSTRACT FROM AUTHOR]

The seismic sequence which hit the Northern Italian territory in 2012 produced extensive damage to reinforced concrete (RC) precast buildings typically adopted as industrial facilities. The considered damaged buildings are constituted by one-storey precast structures with RC columns connected to the ground by means of isolated socket foundations. The roof structural layout is composed of pre-stressed RC beams supporting pre-stressed RC floor elements, both designed as simply supported beams. The observed damage pattern, already highlighted in previous earthquakes, is mainly related to insufficient connection strength and ductility or to the absence of mechanical devices, being the connections designed neglecting seismic loads or neglecting displacement and rotation compatibility between adjacent elements. Following the vulnerabilities emerged in past seismic events, the paper investigates the seismic performance of industrial facilities typical of the Italian territory. The European building code seismic assessment methodologies are presented and discussed, as well as the retrofit interventions required to achieve an appropriate level of seismic capacity. The assessment procedure and retrofit solutions are applied to a selected case study. [ABSTRACT FROM AUTHOR]

The seismic performance of non-structural elements is now recognized to be a key issue in the seismic assessment and earthquake related loss estimation of buildings, both at the individual and regional scale. The evaluation of the seismic demand on non-structural elements in many modern building codes is often based on inaccurate distributions of floor accelerations. For this reason, some design oriented simplified methodologies have been developed recently to predict floor response spectra in reinforced concrete buildings. Although the influence of masonry infills on the seismic performance of reinforced concrete buildings has been widely demonstrated, infills are generally neglected both in the design and in the evaluation of floor response spectra, which could lead to un-conservative design of non-structural elements. In this paper, the effect of masonry infills on absolute acceleration and relative displacement floor response spectra for reinforced concrete buildings subjected to frequent (serviceability level) earthquakes is investigated through a probabilistic framework. A database of one hundred masonry infilled reinforced concrete frames, representative of the European context, was generated and each building analyzed through nonlinear time history analyses. From the results of these analyses, the acceleration and displacement response spectra at different floor levels of both bare and infilled frame archetypes were then computed. The effectiveness of the most common assumptions made in regional risk models to estimate the non-structural losses is investigated and a first attempt at a more refined approach taking into account the effect of masonry infills is proposed. [ABSTRACT FROM AUTHOR]