Search

The rainfall often causes changes in the physical performance of the embankment, which leads to disasters such as embankment collapse and road surface settlement and cracking. Past research has tended to be limited to traditional embankment seepage models and is mostly based on the assumption that surface precipitation is uniform and rainfall intensity is constant. To adapt to the changes and development of the times, based on the water leakage mode of the flexibly assembled highway embankment, a new rainfall calculation model of the reinforced soil embankment is constructed and combined with the solid-fluid coupling physics theory, the sedimentation amount and slope stability of the embankment are analyzed at multiple levels, the mechanical properties of the new embankment under rainfall conditions are summarized, the factors affecting the settlement of the embankment and the stability of the slope are explored, and the reference model is provided for the construction of the new embankment, and the existing construction process is improved through multilevel cause analysis. We improve and develop the existing theoretical system to reduce the probability of road diseases, improve the efficiency of road construction, and reduce the cost of road maintenance. [ABSTRACT FROM AUTHOR]

Reinforced soil-retaining structures that have been working in near-water environments for a long time are likely to affect their own mechanical properties due to the dry-wet cycle caused by changes in water level. In response to this problem, this paper uses a combination of macro- and microtests, selecting reinforced soil samples with four water content conditions, five overburden pressure conditions, three sets of dry-wet cycle conditions, and a total of 60 working conditions for testing. Scanning electron microscopy was used to observe the microscopic characterization of the reinforced soil particles under different times of the dry-wet cycle, and the pull-out test was used to study the mechanical properties of the interface of the reinforced materials and soils. The analysis results of the test show that the dry-wet cycles increase the porosity of the reinforced soil and the number of pores, among which the proportion of micro and small pores increases, the abundance and fractal dimension of reinforced soil particles increase, and the roughness of the particle surface is reduced. The change of the microstructure of the reinforced soil causes the cohesion of the soil to decrease in the macroscopic view. The friction coefficient and the ultimate pull-out force of the interface between the reinforced materials and the soils decrease with the increase of times of dry-wet cycle. [ABSTRACT FROM AUTHOR]

In this study, the failure mode of flexible reinforced soil slopes under earthquake action was investigated by shaking table tests. The distribution law of a potential failure surface of a flexible no-faceplate reinforced soil slope under earthquake action was obtained based on the analysis results. A simplified trilinear failure surface suitable for flexible reinforced soil slopes without faceplate was proposed. Subsequently, based on the upper-bound theorem of limit analysis, we derived the formula for calculating the yield seismic acceleration coefficient of a flexible no-faceplate reinforced soil slope under a seismic load. The main parameters that affect its seismic performance were determined. The flexible geogrid reverse-packed reinforced earth structure can effectively limit the fracture of a slope body and improve the stability of the slope. This provides a theoretical basis for facilitating the engineering of flexible reinforced soil slopes. [ABSTRACT FROM AUTHOR]

The reinforced soil-retaining wall has been widely used in coastal projects, and the dry-wet cycles influence the mechanical properties of the reinforced soil interface. This study conducts macro-micro tests and selects four different water content samples of reinforced soil with five types of overburden pressure conditions and three sets of dry-wet cycles, with a total of 60 working conditions. The pull-out test was used to study the mechanical properties of the reinforced soil interface. The scanning electron microscope was used to observe the microscopic characterization of the particles under different working conditions. Through the analysis of the experimental results, we can draw the conclusion as follows. (1) The friction coefficient of the reinforced soil interface decreases with the increase of the number of dry and wet cycles. (2) The apparent cohesion of soil-reinforcement interface decreases with the increase of the number of dry-wet cycles. After 30 dry-wet cycles, the apparent cohesion of the soil-reinforcement interface with water content of 14% is the maximum 5.91 kPa. The variation law of cohesion derived from microstructure analysis conforms to the laws and conclusions obtained by the experiment. (3) The shear stress of the reinforced soil is linearly related to the normal stress, which is in accordance with Coulomb's law. [ABSTRACT FROM AUTHOR]

This paper focuses on understanding the dynamic response problem of flexible wrapped reinforced Earth slope under the coupling effect of earthquake and rainfall; a numerical calculation model of reinforced Earth slope considering the coupling effect of earthquake and rainfall was established. The dynamic response, pore pressure, and tensile stress distribution of the reinforcement under the rainfall before earthquake, the rainfall after the earthquake, and earthquake-rainfall are studied. The results show that the coupling effect of earthquake and rainfall is an influential factor in the dynamic analysis of reinforced Earth slopes, the analysis of which should be paid attention to and researched in the future. The combination of geogrid and soil effectively improves the deformation of the slope and the overall stability, reduces the secondary disaster of the slope, and provides a reference for the seismic construction design of the reinforced Earth slope. [ABSTRACT FROM AUTHOR]