Search

This paper presents a dynamic thermal model which predicts the winding temperature of electrical machines at steady-state and transient conditions where windings are used in integrated battery chargers (IBCs) for DC charging in a stationary position. Using winding in high current charging process causes rising winding temperature which affects insulation life. Switched reluctance machines are a proper choice for using in electric vehicles (EVs) because of their advantages such as simple and sturdy structures. IBCs can reduce volume and weight of EVs and total cost is diminished because of integration. The analytical thermal model proposed in this paper can calculates the winding temperature in balanced and unbalanced currents injection because of the phase inductance in each rotor angle is distinct, so current excitation in each phase should be different for obtaining zero total torque and keeping rotor in a stationary position, also a reduced-order model is proposed with minor impact on the accuracy of the model. Special attention has been paid to monitor the winding temperature with considering the motor lifetime in DC charging mode, this view has not been addressed in IBCs before. The proposed model is then validated against experimental results and 3D finite element method. [ABSTRACT FROM AUTHOR]

Although Switched Reluctnace Motors have many advantages, vibration is known as their most severe drawback acting as an impediment limiting their widespread use in industrial and domestic applications. Through electromechanical relationships, it is shown that the first-order time derivative of applied phase voltage and second-order time derivative of radial force directly affect the amplitude of generated vibration, especially at the beginning of demagnetization instance. Therefore, a set of criteria is stated in this paper meeting which ensures having low vibration intensity. In this paper, three types of demagnetization voltages are proposed which comprehensively meet the stated criteria. These voltages share the same characteristics contributing to the vibration reduction in Switched Reluctance Motor. Two vital parameters of Synchronous Counter and Coefficient are included in the proposed demagnetization voltages which must be meticulously chosen in order to be effective. Noticeable contribution of the proposed methods to the vibration alleviation is validated through simulation and experimental tests conducted under different working conditions. [ABSTRACT FROM AUTHOR]

Direct instantaneous torque control (DITC) is one way of controlling torque in switched reluctance motors. Despite the presence of DITC control, torque ripple at nominal or higher speeds is considerable due to the back emf increasing. To overcome this drawback, many converters have been proposed. In most convertors proposed for fast excitation in DITC, controlling of boost capacity is an important problem. This paper presents a DITC for a switched reluctance motor using a proposed converter to reduce the torque ripple with controlled boost capacitor automatically. The proposed converter reduces the torque ripple at rated or higher speeds and no controller requires controlling the boost capacitor. The proposed converter is compared with an asymmetric one via simulation results using MATLAB and experimental results. [ABSTRACT FROM AUTHOR]