Search

Thanks to the absence of rotor windings and permanent magnets, switched reluctance motors have a small weight construction. The integration of a modular power converter in a switched reluctance motor leads to a highly compact and fault-tolerant motor drive with small weight and high power density. In this article, a polygon-retrofitted integration topology is proposed for switched reluctance motors. Both the switched reluctance motor and the power converter are cooled with one shared cooling circuit. The power converter is designed and implemented using silicon carbide technology for its low losses and small thermal resistance. The proposed integration topology is extensively studied using multiphysics modeling and experimental measurements on a fully integrated rotating setup. A highly compact and power dense drive of 3.1 kW/L is obtained. [ABSTRACT FROM AUTHOR]

Due to the significant advantages of a high torque density, better fault tolerance and high efficiency, the combined star–pentagon winding has recently gained researchers' interest. In this paper, a simple method to identify the sequence of phases of a five-phase machine with combined star–pentagon winding was proposed. This was accomplished using resistance measurements between adjacent and non-adjacent phases. The analysis was conducted to clarify the phase sequence identification method. A case study of a 5.5 kW five-phase synchronous reluctance motor with combined star–pentagon winding was considered to simply apply the proposed method using an LCR meter for resistance measurements. The parasitic and wire resistances are dominant in the studied case, and this did not influence the accuracy of this method. [ABSTRACT FROM AUTHOR]

In this work, a proposed high-efficiency and low-cost photovoltaic water-pumping system based on semitransparent dye-sensitized solar cells (DSSCs) is presented. DSSCs are low-cost third-generation photovoltaics that have gained a lot of interest as a promising alternative for silicon solar cells. DSSCs are fabricated at low cost and low temperature and present power conversions with high efficiency, exceeding 14%, thanks to high transparency, a variety of colors, and high efficiency, even in low light conditions. The DSSC modules used in this study were tested under different working conditions, and their characteristics were determined experimentally and simulated theoretically via MATLAB. A complete laboratory infrastructure is constructed to test the proposed photovoltaic water-pumping system based on the DSSC module array. The system contains a synchronous reluctance motor driving a water pump and feeding from the DSSCs via an inverter without DC–DC converters or batteries. The proposed system has many merits, such as high efficiency and low cost. The DSSCs' maximum available power is obtained via a maximum power point tracking technique (perturb-and-observe). Moreover, a control system for driving the motor via the inverter was also implemented. The maximum torque per ampere strategy is also considered in the proposed control system to drive the motor efficiently using the inverter. Finally, experimental validation of the complete system via laboratory measurements is implemented. [ABSTRACT FROM AUTHOR]

Multiphase machines with a prime number of phases (five and seven) have shown better torque density than machines with other phase numbers. Unfortunately, these machines require a special stator design. Hence, this article proposes general rewinding techniques to obtain a five-phase winding from the existing standard three-phase stator frames. The proposed rewinding techniques are applied to construct a five-phase star-connected synchronous reluctance machine (SynRM 1) and a novel combined star-pentagon winding (SynRM 2). Simple mathematical formulations are introduced to compute the equivalent winding factor. The performance of five-phase SynRMs is analyzed using two-dimensional Ansys Maxwell transient simulations under the same copper volume for both healthy and faulty cases. SynRM 1 and 2 provide 6.56% and 13.35% higher torque compared to the three-phase SynRM at rated current and at optimal current angle. The torque ripple is decreased by 17% and 30%, respectively. Moreover, SynRM 1 and 2 offer a better performance at the faulty case; e.g., at one phase opened, the average torque of SynRM 1 and 2 is 82% and 108% higher compared to the three-phase SynRM. In addition, the torque ripple is reduced by about 63% and 81%. Finally, experimental results are done to validate the proposed winding techniques. [ABSTRACT FROM AUTHOR]

Nowadays, water pumping systems based on photovoltaics as a source of electricity have widely increased. System cost and efficiency still require enhancement in order to spread their application. Perovskite solar cells (PSCs) are the most hopeful third-generation photovoltaic for replacing the silicon-based photovoltaic thanks to their high power conversion efficiency, reaching 25.8%; tunable band-gap; long diffusion length; low fabrication temperature; and low cost. In this work, for the first time, we proposed a high-power-density hybrid perovskite solar cell thermoelectric generator (TEG) array for feeding a synchronous reluctance motor (SynRM) driving a water pump for use in an irrigation system. A control technique was used to achieve two functions. The first function was driving the motor to obtain the maximum torque/ampere. The second was harvesting the maximum perovskite solar cell array output power on the basis of the maximum power point tracking (MPPT) algorithm using the perturbation and observation approach. Thus, the proposed hybrid perovskite solar cell–thermoelectric generator feeds the motor via an inverter without DC–DC converters or batteries. Accordingly, the short life problems and the high replacement cost are avoided. The proposed complete system was simulated via the MATLAB package. Moreover, a complete laboratory infrastructure was constructed for testing the proposed high-power-density hybrid perovskite solar cell–TEG array for the water pumping system. The results revealed that using the high-power-density hybrid perovskite solar cell–TEG array, both the motor's output power and the pump's flow rate were improved by 11% and 14%, respectively, compared to only using the perovskite solar cell array. Finally, both the simulation and experimental results proved the high-performance efficiency of the system in addition to showing its system complexity and cost reduction. [ABSTRACT FROM AUTHOR]

This article compares the performance of an existing three-phase synchronous reluctance machine (SynRM) with an identical machine that is upgraded to a five-phase machine. Two different methods are possible to convert the existing three-phase machine to a five-phase one with minimum cost. In the first method, a five-phase SynRM (SynRM 1) is obtained by replacing the existing stator by another one that has an integer number of slots per pole, i.e., a multiple of five. In the second method, a five-phase SynRM (SynRM 2) is obtained by rewinding the existing stator with a special type of winding. This is because the slot number of the existing stators is not a multiple of five. The novelty of the article is that two five-phase SynRMs are compared with the original three phase reference machine in terms of torque and torque ripple, in healthy and fault conditions. At rated condition and optimal current angle, SynRM 1 performs better than SynRM 2 in terms of rated torque: SynRM 1 and 2 have 11.8% and 6.6% higher torque than the three-phase machine. But, SynRM 1 has 25% more torque ripple than the three-phase reference machine, while SynRM 2 has 17% lower torque ripple. At faulty case, SynRM 1 and 2 work at 74% and 79% of the healthy rated torque of the three-phase SynRM, while the three-phase SynRM works at only 43% with a very huge torque ripple. Finally, experimental measurements are obtained to validate the theoretical work. [ABSTRACT FROM AUTHOR]

Due to the significant advantages of cost savings, low temperature rises and high efficiency, synchronous reluctance machines (SynRMs) have attracted growing interest from academia to industrial applications. Numerous articles have been published to obtain a SynRM with improved performance (i.e., a high torque density and efficiency and a lower torque ripple) using different focusing points at healthy and faulty conditions such as rotor design, magnetic steel grade, stator winding, and fault tolerance control (FTC) strategy. Hence, this article reviews the scientific researches about SynRMs aiming to improve their performance. These scientific researches can be categorized into four sections: 1) optimal rotor design; 2) magnetic steel grade; 3) winding configurations; and 4) FTC strategies. [ABSTRACT FROM AUTHOR]

Summary: Perovskite solar cells (PSCs) are in the forefront of third‐generation of photovoltaics and gained a lot of attention as a very promising green technology toward direct solar energy conversion to electricity. PSCs are fabricated following solution‐processed techniques at low temperature and they present high power conversion efficiency exceeding 25%, enabling them to be attractive alternative to the silicon‐based devices. This research work proposes an efficient and cost‐effective photovoltaic (PV) pumping system based on PSCs. For this purpose, lab‐scale PSCs were fabricated and their characteristics were determined. In parallel, the geometry of a synchronous reluctance motor (SynRM) driving a 350 m3/day water pump was optimized for maximizing the output power, while minimizing the torque ripple simultaneously. In addition, a perovskite solar array feeding the SynRM via an inverter was designed and implemented. The inverter was properly regulated by a control system which optimized the maximum available power of the PSCs solar array and the SynRM characteristics. Finally, laboratory measurements were performed, including a power generator simulating the behavior of the PSCs array feeding the SynRM. The obtained results confirmed the experimental validation of the proposed approach. [ABSTRACT FROM AUTHOR]

A new structure of a linear switched reluctance motor is proposed in this paper. With the permanent magnet inserted in the movers, the performance of the original motor is improved. An electromagnetic analysis is done by using the finite element analysis. The influence of the permanent magnets in different positions of the movers on the electromagnetic force is investigated. Furthermore, a theoretical analysis is made, based on the Schwarz–Christoffel transformation and the Maxwell stress tensor method. The mathematic model is also made with the consideration of the end effect and the cogging effect. The theoretical result of the electromagnetic force is compared with the simulation result. The comparison shows that the error is limited. The analysis of the flux, the magnetic field, and the inductance is then made. The results confirm that the new structure makes the motor more linearized. The new structure of linear switched reluctance motor can contribute to reducing the ripple in the electromagnetic force. [ABSTRACT FROM AUTHOR]

This paper compares four prototype Synchronous Reluctance Motors (SynRMs) having an identical geometry of iron lamination stacks in the stator and rotor. Two different stator winding layouts are employed: a conventional three-phase star connection and a combined star-delta winding. In addition, two rotors are considered: a conventional rotor without magnets and a rotor with ferrite magnets. The performance of the four SynRMs is evaluated using a two-dimensional (2D) Finite Element Model (FEM). For the same copper volume and current, the combined star-delta-connected stator with Permanent Magnets (PMs) in the rotor corresponds to an approximately 22% increase in the output torque at rated current and speed compared to the conventional machine. This improvement is mainly thanks to adding ferrite PMs in the rotor as well as to the improved winding factor of the combined star-delta winding. The torque gain increases up to 150% for low current. Moreover, the rated efficiency is 93.60% compared to 92.10% for the conventional machine. On the other hand, the impact on the power factor and losses of SynRM when using the star-delta windings instead of the star windings is merely negligible. The theoretical results are experimentally validated using four identical prototype machines with identical lamination stacks but different rotors and winding layouts. [ABSTRACT FROM AUTHOR]

In synchronous reluctance motors (SynRMs), the d- and q-axis inductances ( Ld and Lq) are nonlinear functions of d- and q-axis currents (id and iq) and rotor position ( \theta r). The main research question for dynamic studies of SynRMs in this paper is how accurate should the inductance model be to have a reliable computation of dynamic behavior and stability limits? The stability limits are important in the case of $V/ f$ control without position feedback. To answer the question, we consider three cases: 1) inductances are function of id , iq, and \theta r; 2) inductances are function of id and iq, averaged over the position \theta r; and 3) inductances are constant values, with properly chosen values. The cases 1 and 2 include saturation and cross saturation, while case 3 does not. It is found that averaging the rotor position \theta r is almost not jeopardizing accuracy of the SynRM model. However, including magnetic saturation is crucial: it is observed that using constants Ld and Lq to represent the SynRM modeling leads to a large deviation in the prediction of the torque capability compared to the practical motor. In addition, including the magnetic saturation effect in the closed-loop control of SynRMs is necessary. Then, maximum torque per ampere can be achieved. Finally, the proposed method of including the magnetic saturation and the rotor position effects in the SynRM modeling has been validated by experimental measurements. [ABSTRACT FROM AUTHOR]

This paper analyzes and compares the synchronous reluctance motor (SynRM) performance for a conventional star winding and for a combined star-delta connected winding under healthy and faulty conditions. The finite element method is used to simulate the SynRM characteristics in case of normal star and in case of combined star-delta connected windings. For the healthy case, it was found that for the same current, the SynRM output power increased by about 5% for the star-delta connected windings compared with the conventional star connection. Moreover, the efficiency increased slightly by 0.20%. Probably the strongest advantage of the combined star-delta winding is observed when a phase fault occurs. When one phase is missing, for the same current, the star-delta connected motor keeps 80% of the rated torque in the healthy case, while the star connected motor only keeps 40%. Furthermore, the torque ripple of the star wound machine is extremely high in case of a missing phase, compared to the star-delta wound machine. Simulation results were validated by experimental results to show the effectiveness of the star-delta connected windings on the SynRM. [ABSTRACT FROM PUBLISHER]

This paper investigates the influence of various electrical steel grades on the torque and efficiency of synchronous reluctance motors (SynRMs). Four different steel grades are studied for the same motor geometry. A finite-element method is combined with an experiment-based magnetic material model to study the effect of the four steel grades on the performance of the SynRM. On the one hand, there is a negligible effect on the torque ripple because this ripple depends mainly on the motor geometry. On the other hand, it was found that the material properties have an obvious effect on the SynRM efficiency and output power. Evidently, the low loss grades result in higher efficiency: 9% point higher for NO20 compared with M600-100A. One of the four considered grades is designed to have a higher flux density in the useful magnetic field range (a few hundreds to a few thousand amperes per meter). This grade has somewhat lower efficiency, but results in a higher saliency ratio and an 8% higher torque output compared with the worst grade. Some experimental validation results are shown. [ABSTRACT FROM AUTHOR]

The identification of the magnetic material characteristics for the switched reluctance motor by solving an inverse problem is presented. The inverse problem aims at identifying the magnetic material parameter values of the magnetic circuit, starting from measured torque profiles. The computational time of the inverse problem is appreciably reduced by implementing a space mapping-based inverse approach. Using the space mapping technique, we combine the computationally intensive finite element model with a much faster magnetic network model. The proposed approach is very helpful for the material identification problem on the electrical machine, and the obtained results reveal the success and the reliability of the proposed scheme. [ABSTRACT FROM AUTHOR]

In switched reluctance motors, rotor position information can be extracted from the measurement of position-dependent phase voltage resonances. Due to hysteresis in the magnetic core of the machine, subsequently triggered resonances can exhibit different resonance waveforms, even when the rotor is held at a constant angular position. In order to analyze the influence of hysteresis, a finite-difference model of a magnetic lamination is coupled with a scalar Preisach model and with an electric circuit comprising an air gap and an equivalent capacitance associated with the converter, power cable and phase winding. A good correspondence is obtained between simulated and measured time-domain resonance waveforms. The model is used to predict the impact of hysteresis on the initial position estimation at start-up of the drive. [ABSTRACT FROM PUBLISHER]

The torque density and efficiency of synchronous reluctance machines (SynRMs) are greatly affected by the geometry of the rotor. Hence, an optimal design of the SynRM rotor geometry is highly recommended to achieve optimal performance (i.e., torque density, efficiency, and power factor). This paper studies the impact of considering the current angle as a variable during the optimization process on the resulting optimal geometry of the SynRM rotor. Various cases are analyzed and compared for different ranges of current angles during the optimization process. The analysis is carried out using finite element magnetic simulation. The obtained optimal geometry is prototyped for validation purposes. It is observed that when considering the effect of the current angle during the optimization process, the output power of the optimal geometry is about 3.32% higher than that of a fixed current angle case. In addition, during the optimization process, the case which considers the current angle as a variable has reached the optimal rotor geometry faster than that of a fixed current angle case. Moreover, it is observed that for a fixed current angle case, the torque ripple is affected by the selected value of the current angle. The torque ripple is greatly decreased by about 34.20% with a current angle of 45° compared to a current angle of 56.50°, which was introduced in previous literature. [ABSTRACT FROM AUTHOR]

This paper proposes a novel photovoltaic water pumping system (PVWPS) with an improved performance and cost. This system doesn't contain a DC-DC converter, batteries nor rare-earth motors. Removing the aforementioned components will reduce the whole cost and increase the reliability of the system. For enhancing the performance of the PVWPS, a ferrite magnet synchronous reluctance motor (FMSynRM) is employed. Besides, the motor inverter is utilized to drive the motor properly and to extract the maximum available power of the PV system. This is performed using a suggested control strategy that controls the motor inverter. Furthermore, to show the effectiveness of the proposed PVWPS, the performance of the proposed system is benchmarked with a PVWPS that is employing a pure SynRM. Moreover, the complete mathematical model of the system components and the control is reported. It is proved that the flow rate employing the proposed system is increased by about 29.5% at a low irradiation level (0.25 kW/m2) and 15% at a high irradiation level (1 kW/m2) compared to the conventional solar system using a pure synchronous reluctance motor (SynRM). An experimental laboratory test bench is built to validate the theoretical results presented in this research work. Good agreement between the theoretical and the experimental results is proved. [ABSTRACT FROM AUTHOR]