Search

This article investigates the usage of terrestrial laser scanner (TLS) point clouds for monitoring the gradual movements of soil masses due to freeze–thaw activity and water saturation, commonly referred to as solifluction. Solifluction is a geomorphic process which is characteristic for hillslopes in (high-)mountain areas, primarily alpine periglacial areas and the arctic. The movement can reach millimetre-to-centimetre per year velocities, remaining well below the typical displacement mangitudes of other frequently monitored natural objects, such as landslides and glaciers. Hence, a better understanding of solifluction processes requires increased spatial and temporal resolution with relatively high measurement accuracy. To that end, we developed a workflow for TLS point cloud processing, providing a 3D vector field that can capture soil mass displacement due to solifluction with high fidelity. This is based on the common image-processing techniques of feature detection and tracking. The developed workflow is tested on a study area placed in Hohe Tauern range of the Austrian Alps with a prominent assemblage of solifluction lobes. The derived displacements were compared with the established geomonitoring approach with total station and signalized markers and point cloud deformation monitoring approaches. The comparison indicated that the achieved results were in the same accuracy range as the established methods, with an advantage of notably higher spatial resolution. This improvement allowed for new insights considering the solifluction processes.

The main reflectors of radio telescopes deform due to gravitation when changing their elevation angle. This can be analyzed by scanning the paraboloid surface with a terrestrial laser scanner and by determining focal length variations and local deformations from best-fit approximations.For the Effelsberg radio telescope, both groups of deformations are estimated from seven points clouds measured at different elevation angles of the telescope: the focal length decreases by 22.7 mm when tilting the telescope from 90 deg to 7.5 deg elevation angle. Variable deformations of ± 2 mm are detected as well at certain areas. Furthermore, a few surface panels seem to be misaligned.Apart from these results, the present study highlights the need for an appropriate measurement concept and for preprocessing stepswhen using laser scanners for area-based deformation analyses. Especially, data reduction, object segmentation and laser scanner calibration are discussed in more detail. An omission of these steps would significantly degrade the deformation analysis and the significance of its results. This holds for all sorts of laser scanner based analyses.