Search

Poly(3-alkylthiophenes), P3AT, are organic polymers formed by conjugate structures with conductive properties. Zinc oxide (ZnO) has been used as an electron acceptor in hybrid solar cells because it offers electron transport properties and can be synthesized by methods in which the variation of synthesis parameters allows morphological control. Different ZnO morphologies allow for distinct properties in terms of electronic transport at the interface of solar cells. ZnO particles were synthesized by the co-precipitation method. ZnO films were deposited by spin-coating in Fluorine Tin Oxide (FTO) and then immersed in solutions containing poly (3-hexylthiophene) (P3HT) or poly (3-octylthiophene) (P3OT) polymers. The cell was assembled in the form of a sandwich consisting of: FTO/ZnO,P3AT/Iˉ,I3ˉ/Pt/FTO. UV-vis measurements were performed for bandgap calculation, scanning electron microscopy (SEM), X-ray diffraction (XRD), and J-V curves. The ZnO/P3HT cell presented the best values of J, V and η, indicating an improvement in the electronic transfer processes, with a value of η = 0.56%. DOI: http://dx.doi.org/10.17807/orbital.v13i2.1451

Hybrid inorganic-organic solar cells are an attractive alternative energy source because of their low-cost production and ability to make use of a large amount of solar radiation available. This work aims to evaluate different solar cells composed of TiO2 and ZnO with P3OT/P3MT copolymer. Layers of semiconductor oxides were deposited on transparent fluorine-doped tin oxide (FTO) by spin coating and adsorption in the polymer solution. X-ray diffraction (XRD), scanning electron microscopy (SEM), were used to characterize the fabricated semiconductors and curves of current density vs. potential (j-V), photochronoamperometry (j-t) and electrochemical impedance spectroscopy (EIS) were used to determine their electrical characteristics. The XRD analyses confirmed the crystalline nature of the oxide materials. SEM micrographs showed the spherical morphology of ZnO and the poorly defined agglomerate morphology of TiO2. The electrochemical measurements proved that the best cell was produced with P3OT/P3MT copolymer and TiO2, owing to its lower charge transfer resistance, with the following photovoltaic parameters: Voc = 0.615 V ± 0.004, jsc = 1.545 mA cm-2 ± 0.240, FF = 0.637 ± 0.003, and η = 0.617% ± 0.117.