Search

With vast potential for renewable energy conversion, the ocean could help reduce our reliance on fossil fuels. Of the various forms of ocean energy, tidal range power is both mature and predictable, dating back to 1966. However, only a few regions of the world are suited to tidal range power. Here, we examine the tidal range potential of the Patagonian shelf – estimated to contain over 100 GW of tidal dissipation. We use a high resolution global tidal atlas (TPXO9) to examine this resource from theoretical and technical perspectives. The theoretical resource is 913 TWh (104 GW) – considerably exceeding neighbouring Argentina's electricity demand (∼ 143 TWh in 2021). We find that due to near-resonance with the semidiurnal tides, the resource is concentrated in two regions – Golfo de San Matías, and Bahía Grande to Río Grande. Three sites are chosen for further analysis after considering practical constraints such as water depth and proximity to the electricity grid. Through 0D modelling with tidal range power plant operation we find that the selected sites offer high energy extraction potential, exceeding 40% of the available resource. Further analysis shows how the combination of the sites can reduce the periods of no-generation to under 20%. • Tidal range has huge global potential but is concentrated in just a few regions. • Patagonian shelf is one such region but the resource has not been studied in detail. • We use a global tidal atlas to quantify the theoretical tidal range resource. • We apply 0D modelling to calculate the technical tidal range resource. • The tidal resource is 913 TWh with high potential for complementary phased sites. [ABSTRACT FROM AUTHOR]

Free-flowing rivers have been impacted by anthropogenic activity and extensive hydropower development. Despite this, many opportunities exist for context-specific energy extraction, at locations deemed undesirable for conventional hydropower plants, in ways that reduce the scale of operation and impact. Hydrokinetic energy conversion is a renewable energy technology that requires accurate resource assessment to support deployment in rivers. We use global-scale modeled river discharge data, combined with a high-resolution vectorized representation of river networks, to estimate channel form, flow velocities, and, hence, global hydrokinetic potential. Our approach is based directly on the transfer of kinetic energy through the river network, rather than conventional, yet less realistic, assessments that are based on conversion from gravitational potential energy. We show that this new approach provides a more accurate global distribution of the hydrokinetic resource, highlighting the importance of the lower-courses of major rivers. The resource is shown to have great potential on the continents of South America, Asia, and Africa. We calculate that the mean hydrokinetic energy of global rivers (excluding Greenland and Antarctica) is 5.911 ± 0.009 PJ (1.642 ± 0.003 TWh). [ABSTRACT FROM AUTHOR]

The ocean contains a variety of renewable energy resources, little of which has been exploited. Here, we review both tidal range and tidal stream energy, with a focus on the resource, feedbacks, and environmental interactions. The review covers a wide range of timescales of relevance to tidal energy, from fortnightly (spring-neap) and semi-diurnal variability, down to array, and device-scale turbulence. When simulating the regional tidal energy resource, and to assess environmental impacts, it is necessary to account for feedbacks between the tidal array and the resource itself. We critically review various methods for simulating energy extraction, from insights gained through theoretical studies of "tidal fences" in idealized channels, to realistic three-dimensional model studies with complex geometry and arrays of turbines represented by momentum sinks and additional turbulence due to the presence of rotors and support structures. We discuss how variability can be reduced by developing multiple (aggregated) sites with a consideration of the enhanced phase diversity offered by exploiting less energetic tidal currents. This leads to future research questions that have not yet been explored in depth at first-generation tidal sites in relatively sheltered channels (e.g., the interaction of waves with currents). Such enhanced understanding of real sea conditions, including the effects of wind and waves, leads to our other identified primary future research direction—reduced uncertainties in turbulence predictions, including the development of realistic models that simulate the interaction between ambient turbulence and the turbulence resulting from multiple wakes, and changes to system-wide hydrodynamics, water quality, and sedimentation. [ABSTRACT FROM AUTHOR]

Tidal energy is one of the most predictable forms of renewable energy. Although there has been much commercial and R&D progress in tidal stream energy, tidal range is a more mature technology, with tidal range power plants having a history that extends back over 50 years. With the 2017 publication of the “Hendry Review” that examined the feasibility of tidal lagoon power plants in the UK, it is timely to review tidal range power plants. Here, we explain the main principles of tidal range power plants, and review two main research areas: the present and future tidal range resource, and the optimization of tidal range power plants. We also discuss how variability in the electricity generated from tidal range power plants could be partially offset by the development of multiple power plants (e.g. lagoons) that are complementary in phase, and by the provision of energy storage. Finally, we discuss the implications of the Hendry Review, and what this means for the future of tidal range power plants in the UK and internationally. [ABSTRACT FROM AUTHOR]

In addition to technical and economic constraints, tidal energy leasing is generally governed by demand for sites which contain the highest tidal streams, and does not take into account the phase relationship (i.e. the time lag) between sites. Here, the outputs of a three-dimensional tidal model are analysed to demonstrate that there is minimal phase diversity among the high tidal stream regions of the NW European shelf seas. It is therefore possible, under the current leasing system, that the electricity produced by the first generation of tidal stream arrays will similarly be in phase. Extending the analysis to lower tidal stream regions, we demonstrate that these lower energy sites offer more potential for phase diversity, with a mean phase difference of 1.25 h, compared to the phase of high energy sites, and hence more scope for supplying firm power to the electricity grid. We therefore suggest that a state-led leasing strategy, favouring the development of sites which are complementary in phase, and not simply sites which experience the highest current speeds, would encourage a sustainable tidal energy industry. [ABSTRACT FROM AUTHOR]

Wave–current interaction (WCI) processes can potentially alter tidal currents, and consequently affect the tidal stream resource at wave exposed sites. In this research, a high resolution coupled wave-tide model of a proposed tidal stream array has been developed. We investigated the effect of WCI processes on the tidal resource of the site for typical dominant wave scenarios of the region. We have implemented a simplified method to include the effect of waves on bottom friction. The results show that as a consequence of the combined effects of the wave radiation stresses and enhanced bottom friction, the tidal energy resource can be reduced by up to 20% and 15%, for extreme and mean winter wave scenarios, respectively. Whilst this study assessed the impact for a site relatively exposed to waves, the magnitude of this effect is variable depending on the wave climate of a region, and is expected to be different, particularly, in sites which are more exposed to waves. Such effects can be investigated in detail in future studies using a similar procedure to that presented here. It was also shown that the wind generated currents due to wind shear stress can alter the distribution of this effect. [ABSTRACT FROM AUTHOR]

Abstract: When selecting sites for marine renewable energy projects, there are a wide range of economical and practical constraints to be considered, from the magnitude of the resource through to proximity of grid connections. One factor that is not routinely considered in tidal energy site selection, yet which has an important role in quantifying the resource, is tidal asymmetry, i.e. variations between the flood and ebb phases of the tidal cycle. Here, we present theory and develop a high-resolution three-dimensional ROMS tidal model of Orkney to examine net power output for a range of sites along an energetic channel with varying degrees of tidal asymmetry. Since power output is related to velocity cubed, even small asymmetries in velocity lead to substantial asymmetries in power output. We also use the 3D model to assess how tidal asymmetry changes with height above the bed, i.e. representing different device hub heights, how asymmetry affects turbulence properties, and how asymmetry is influenced by wind-driven currents. Finally, although there is minimal potential for tidal phasing over our study site, we demonstrate that regions of opposing flood- versus ebb-dominant asymmetry occurring over short spatial scales can be aggregated to provide balanced power generation over the tidal cycle. [Copyright &y& Elsevier]

Although ocean wave power can be significantly modified by tidal currents, resource assessments at wave energy sites generally ignore this effect, mainly due to the difficulties and high computational cost of developing coupled wave-tide models. Furthermore, validating the prediction of wave-current interaction effects in a coupled model is a challenging task, due to the paucity of observational data. Here, as an alternative to fully coupled numerical models, we present a simplified analytical method, based on linear wave theory, to estimate the influence of tidal currents on the wave power resource. The method estimates the resulting increase (or decrease) in wave height and wavelength for opposing (or following) currents, as well as quantifying the change in wave power. The method is validated by applying it to two energetic locations around the UK shelf – Pentland Firth and Bristol Channel – where wave/current interactions are significant, and for which field data are available. Results demonstrate a good accuracy of the simplified analytical approach, which can thus be used as an efficient tool for making rapid estimates of tidal effects on the wave power resource. Additionally, the method can be used to help better interpret numerical model results, as well as observational data. [ABSTRACT FROM AUTHOR]

Tidal-stream energy resource can be predicted deterministically, provided tidal harmonics and turbine-device characteristics are known. Many turbine designs exist, all having different characteristics (e.g. rated speed), which creates uncertainty in resource assessment or renewable energy system-design decision-making. A standardised normalised tidal-stream power-density curve was parameterised with data from 14 operational horizontal-axis turbines (e.g. mean cut-in speed was ∼30% of rated speed). Applying FES2014 global tidal data (1/16° gridded resolution) up to 25 km from the coast, allowed optimal turbine rated speed assessment. Maximum yield was found for turbine rated speed ∼97% of maximum current speed (maxU) using the 4 largest tidal constituents (M2, S2, K1 and O1) and ∼87% maxU for a "high yield" scenario (highest Capacity Factor in top 5% of yield cases); with little spatial variability found for either. Optimisation for firm power (highest Capacity Factor with power gaps less than 2 h), which is important for problematic or expensive energy-storage cases (e.g. off-grid), turbine rated speed of ∼56% maxU was found – but with spatial variability due to tidal form and maximum current speed. We find optimisation and convergent design is possible, and our standardised power curve should help future research in resource and environmental impact assessment. [ABSTRACT FROM AUTHOR]