Search

This article proposes and implements an advanced pulse frequency modulation (PFM) scheme to adjust the output power of the parity-time (PT) symmetric wireless power transfer (WPT) system. The key is to utilize PFM to adjust the duty ratio of the self-excited oscillating inverter for the PT-symmetric WPT system, hence transferring more power than that of the conventional forced oscillating inverter under the same input voltage and duty ratio. Besides, the transmission efficiency can maintain high when the coupling coefficient is larger than the critical value. With a proper signal processing circuit, the phase of the inverter output voltage can lead to that of the primary-side current, which can help reduce the switching loss. Therefore, the system efficiency of this self-excited oscillation scheme for WPT can keep high, while the output power can be larger than that of using the conventional forced oscillation scheme. Theoretical analysis and simulation results are given to verify the feasibility of the proposed scheme. [ABSTRACT FROM AUTHOR]

This article proposes and implements a compact wireless motor drive using orthogonal bipolar coils for the coordinated operation of robotic arms. The key is to orthogonally integrate two bipolar coils to form a compact magnetic coupler (CMC), while each CMC serves as the transmitting coil and receiving coil, respectively. Instead of adopting the one-to-many coil structure and operating at multiple frequencies, in this article, two bipolar coils in the CMC are mutually decoupled and separately energized to drive two permanent magnet dc (PMDC) motors. As such, the wireless and selective motor drives can be achieved via the shared power-transfer channel at a single resonant frequency. All controls and switches are concentrated at the transmitter so that the receiver is entirely sealable. Accordingly, the coordinated operation of robotic arms can be realized with the high integration and no electrocution. Theoretical calculations and experimental results are given to validate the flexibility and feasibility of the proposed system. [ABSTRACT FROM AUTHOR]

This article proposes and implements a wireless power transfer (WPT) with series-capacitor-inductor-capacitor (S-CLC) compensation network and pulse-frequency-modulation (PFM) control for dimmable low-pressure sodium (LPS) lamps. Considering the high-voltage ignition and long-time operation, the LPS lamp has the risk of causing electrocution, especially when operating in a humid environment. Thus, the wireless lighting is highly desirable since the LPS lamp can be completely isolated with maintenance-free under all-weather conditions. The proposed S-CLC compensation for WPT can directly drive the LPS lamp without utilizing any magnetic or electronic ballasts. In addition, the PFM control can achieve effective dimming control, reduced operating frequency, and zero-voltage switching (ZVS) concurrently. Theoretical calculations and experimental results are given to validate the feasibility of the proposed wireless lighting system. [ABSTRACT FROM AUTHOR]