Search

With the global concerns on the issue of how to conserve the limited energy resources, compact fluorescent lamps (CFLs) have been forced in a lot of countries to replace the power-hungry incandescent lamps to reduce the energy cost. However, conventional passive power factor corrected electronic ballasts used in CFLs suffer two major drawbacks: 1) they are unable to achieve close-to-unity power factor and 2) they are unable to provide the same amount of light intensity under fluctuating line voltage. This paper proposed a simple lamp power regulation method for a very high-power factor single-switch electronic ballast, which allows the electronic ballast to maintain almost constant lamp power at its full-power condition for a wide range of the input voltage by controlling the dc-link voltage of the ballast power circuit through duty ratio control. When a TRIAC phase-cut dimmer is used to dim the CFL, the dc-link voltage regulation control loop is deactivated; so that the lamp power decreases accordingly during dimming. The analysis and operating principles of the controller are discussed in this paper. MATLAB, PSIM simulation, and experimental results are provided to highlight the merits of the proposed work. [ABSTRACT FROM AUTHOR]

Although compact fluorescent lamps (CFLs) have been on the market for a long time, many of them do not achieve the same power factor as the incandescent lamps do, which presents a significant problem for the utility with the current widespread use of CFLs for household lightings. A simple single-switch electronic ballast with passive valley-fill power factor correction is proposed in this paper for CFL application. The proposed single-switch ballast circuit is able to achieve zero current switching to maximize the circuit efficiency. A simple feedback circuit with duty ratio control is also proposed to improve the high lamp current crest factor caused by the valley-fill circuit. Detailed descriptions and analysis of the circuit operating principles are provided in this paper. Simulation and experimental results are given on a 13-W CFL tube from Osram Sylvania to highlight the merits of the proposed work. [ABSTRACT FROM PUBLISHER]

A novel dimmable high-power-factor compact fluorescent lamp (CFL) electronic ballast that is compatible with standard incandescent lamp dimmers is proposed in this paper. In the proposed system, the dimming controller uses the phase angle of the dimmer as the input feedforward parameter for the duty ratio control of the switch in the power circuit. As a result, a wide range of light output can be achieved with a small range of phase angles of the phase-cut dimmer. The ballast power circuit is a single-switch single-stage resonant inverter, which is essentially a fusion of a SEPIC converter and a single-switch current-fed inverter. Detailed operating principles of the proposed system will be discussed in this paper. System stability analysis that includes the effects of the phase-cut dimmer is also provided. Experimental results are given for a 13-W CFL to demonstrate and highlight the merits of the proposed work. [ABSTRACT FROM AUTHOR]

A novel single-stage single-switch electronic ballast topology with a unity power factor is presented in this paper. The proposed circuit consists of an integrated buck–boost stage that operates in the discontinuous conduction mode to provide a high power factor and a single-switch current-fed resonant inverter to stabilize the lamp current. The proposed topology presents a low cost and compact electronic ballast design method. The detailed descriptions of the circuit's operating principles are provided in this paper. The design equations and mathematical analysis regarding the proposed circuit are discussed in this paper. The proposed ballast has been tested with an 18-W compact fluorescent lamp, and the experimental results confirmed that a very high power factor of 0.995 and an efficiency of 83.4% have been achieved. [ABSTRACT FROM PUBLISHER]