Search

Recent advancements in the field of piezoelectric micro-resonators have produced devices, such as lithium niobate laterally vibrating resonators, with very high electromechanical coupling factors ($k_{t}^{2}$) and respectable quality factors (${Q}$). As a result, the records of the figure of merit (FoM) for radio-frequency MEMS resonators have been broken several times in the past five years. As exciting as these high FoMs are, they impose unique caveats in accurately extracting the electromechanical coupling often due to the presence of spurious modes. It is a less noted issue for micro-resonators with moderate ${k} _{t}^{2}$ , as spurious modes either are absent or do not significantly affect the common extraction technique based on identifying resonances and anti-resonances. This paper will first theoretically analyze how disregarding spurious modes can potentially lead to inaccurate extraction of ${k} _{t}^{2}$ of the intended mode and then offer a framework that accounts for spurious modes and accurately extracts electromechanical coupling using a multi-resonance recursive fitting. [2018-0209] [ABSTRACT FROM AUTHOR]

This paper presents the first demonstration of nanowatt-level CMOS wakeup receiver (WuRx) front ends (FEs) that utilize microelectromechanical system (MEMS)-based matching networks (MNs). The first FE uses a fully MEMS-based MN (MMN) that operates at 88.8 MHz. It consists of a large array of lithium niobate resonators that are fabricated on the same die. Measurements of the integrated WuRx FE with the MMN indicate that its loaded voltage gain achieves a bandwidth of 0.78 MHz with a quality factor of 114. The second FE uses a hybrid MN (HMN) that operates at 457 MHz. It consists of an aluminum nitride laterally vibrating resonator as well as eight discrete inductors and capacitors surrounding the MEMS device. Measurements of the integrated WuRx FE with the HMN indicate that it achieves a sensitivity of −54 dBm with 7 nW of average dc power consumption without a digital correlator. [ABSTRACT FROM AUTHOR]

This paper demonstrates a passive low-insertion-loss (IL) RF filter with periodic passbands and capable of sparsifying the spectrum from 238 to 526 MHz for sparse Fourier transform (SFT)-based spectrum sensing. The demonstrated periodic filter employs LiNbO3 lateral overtone bulk acoustic resonators (LOBARs) with high-quality factors (Qs), large electromechanical coupling ($k_{t}^{2}$), and multiple equally spaced resonances in a ladder topology. To demonstrate the periodic filter, the LOBARs is first modeled to predict $k_{t}^{2}$ of various tones accurately. The fabricated LOBARs show $k_{t}^{2}$ larger than 1.5% and figure of merits ($Q\cdot k_{t}^{2}$) more than 30 for over 10 tones simultaneously, which agree with our modeled response, and are both among the highest demonstrated in overmoded resonators. The multi-band filter centered at 370 MHz has then been obtained with a passband span of 291 MHz, a spectral spacing of 22 MHz, an IL of 2 dB, FBWs around 0.6%, and a sparsification ratio between 7 and 15. An out-of-band rejection around 25 dB has also been achieved for more than 14 bands. The great performance demonstrated by the RF filter with 14 useable periodic passbands will serve to enable future SFT-based spectrum sensing. [2018-0155] [ABSTRACT FROM AUTHOR]

This paper reports the first demonstration of phononic crystals (PnCs) in suspended lithium niobate thin films, which exhibit band gaps for tailoring the performance of laterally vibrating devices. Transmission and reflection properties of lithium niobate PnCs for both shear-horizontal (SH0) and length-extensional (S0) modes have been investigated and subsequently explored in two applications. In the first case, PnC-embedded delay lines were designed for filtering with stopbands, while in the second case, PnC-bounded resonators were implemented for spurious mode suppression. Equivalent circuit models incorporating acoustic scattering parameters of the designed PnCs and Mason’s model of the transducers have been built for each application. Benchmarked to reference devices without PnCs, the measured PnCs embedded in delay lines show 20-dB attenuation in the stopbands and less than 2-dB loss in the passbands for the SH0 mode, and 30-dB attenuation in the stopbands and less than 10-dB loss in the passbands for the S0 mode. The fabricated piezoelectric PnC-bounded resonator has shown a quality factor of 434 at 142.7 MHz with undesired spurious modes significantly suppressed. These demonstrations show that lithium niobate PnCs for laterally vibrating devices can potentially lead to wideband and low-loss acoustic functions for radio frequency signal processing. [ABSTRACT FROM AUTHOR]