Search

We analyze theoretically both the fundamental and the technical quantum limitations of the sensitivity of a passive resonant optical gyroscope based on a high finesse monolithic optical microcavity. We show that the quantum back action associated with the resonantly enhanced optical cross- and self-phase modulation results in the standard quantum limit of the angle random walk of the gyroscope, which reaches approximately 0.2 deg/hr 1/2 for a millimeter scale CaF 2 whispering gallery mode resonator based device. [ABSTRACT FROM AUTHOR]

In a class of high quality (Q-) factor dielectric resonators with low radiative losses, including popular whispering-gallery mode (WGM) resonators with high azimuthal mode numbers, due to high confinement of modal field in dielectric, the Q-factor is limited by the value of inverse dielectric loss tangent of dielectric material. Metal enclosures necessary for device integration only marginally affect the Q-factor while eliminating the residual radiative loss and allowing the optimization of input and output coupling. While very high Q-factors ∼ 200 000 are available in sapphire WGM resonators in X-band, at millimeter wave frequencies increasing dielectric loss limits the Q-factor to much smaller values, e.g. ∼50000 and ∼25000 for quasi-TE and quasi-TM modes, correspondingly, at 36 GHz. The use of distributed Bragg reflection (DBR) principle allows to push modal energy outside dielectric while also isolating it from Joule losses in metallic enclosure walls. Very high Q ∼ 600 000 > --> t g δ has been demonstrated in X-band [C. A. Flory and R. C. Taber, IEEE Trans. Ultrason., Ferroelectr., Freq. Control 44, 486–495 (1997).] at the expense of impractically large dimensions. In this work, we report on the assembly and testing of a compact Ka-band sapphire distributed Bragg reflector cavity characterized with Q-factor seven times larger than one predicted by the material's dielectric loss at the frequency of interest. An intrinsic Q-factor of ∼ 200 000 is demonstrated at 36 GHz for the lowest order TM-mode of a sapphire DBR. The resonator has 50 cm 3 volume, smaller than previously demonstrated DBRs. [ABSTRACT FROM AUTHOR]

A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in the visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas from strongly dispersive coupled systems in solid state physics and optics. We show that photonic compound ring resonators can possess large anomalous GVD at any desirable wavelength, even if each individual resonator is characterized with normal GVD. Based on this concept, we design a mode-locked frequency comb with thin-film silicon nitride compound ring resonators in the vicinity of the rubidium D1 line (794.6 nm) and propose to use this optical comb as a flywheel for chip-scale optical clocks. [ABSTRACT FROM AUTHOR]

We report on the study of widely tunable, resonant single-sideband electro-optical modulators based on whispering gallery mode (WGM) resonators, made out of electro-optically active materials. The modulation process involves interaction of different WGM families with an externally applied microwave field. The tunability results from the unequal response of the mode families to either a temperature change or to an applied voltage. We show that the modulator can be used as an efficient microwave photonic receiver that operates either in direct or coherent regime. Due to its resonant nature, the high-Q electro-optical modulator also can be used as a resolution booster for a low-resolution RF spectrum analyzer. [ABSTRACT FROM PUBLISHER]

Abstract: We report on a study of optical properties of whispering gallery mode resonators made out of as-grown nominally pure lithium niobate crystals. We have observed a surprising dynamic modification of the spectrum of the resonators illuminated with the near infrared light. We attribute this effect to the photorefractive damage of the resonator host material. [Copyright &y& Elsevier]

We report on the study of near-infrared photorefractivity in highly Mg doped as-grown congruent LiNbO3 forming a whispering gallery mode resonator. The resonator is pumped with 780 nm light. We have observed a change of the ordinary index of refraction of the material exceeding 8×10-5. We show that the basic features of the photorefraction in this type of crystal is different from the photorefraction in nominally pure as-grown congruent LiNbO3 and explain the origin of this difference. [ABSTRACT FROM AUTHOR]

We study theoretically and demonstrate experimentally generation of coherent optical frequency combs in a sapphire whispering gallery mode resonator. We verify phase locking of the comb harmonics by demodulating the comb on a fast photodiode and by observing the production of a spectrally pure radio frequency signal. Because of excellent optical and superior mechanical properties of the material, the sapphire resonator is an excellent candidate for the on-chip device integration of the comb oscillator. [ABSTRACT FROM AUTHOR]

In this paper, we study an experimental method of evaluation of efficiency of an evanescent field coupling of light to a dielectric whispering gallery mode resonator. We show that change of the relative contrast of the observable optical resonance provides an accurate and complete information about the loaded as well as unloaded bandwidth of the resonator mode. We introduce a model of the coupling that allows for an interpolation of the resonator quality factor using experimental data taken without usage of a frequency tunable narrow line laser, a fast photodiode, as well as a frequency reference. The method is also immune to imperfect geometrical mode matching frequently occurring in a realistic system. We validate this model experimentally at both 1.5 and 4.5μm. [ABSTRACT FROM AUTHOR]