Search

In this paper, a new metamaterial absorber (MMA) is presented that exhibits resonances at 3.5 GHz and 13 GHz having peak absorption of 92.7% and 99.99% respectively. The MMA consists of an FR4 substrate with three interconnected circular rings and disk-shaped metallic layers at the top and full copper at the back. The overall dimension is 0.14λ0 × 0.14λ0, where λ0 is calculated at 3.5 GHz. The design is optimized through numerical simulation performed in CST microwave studio. The MMA shows polarization angle and incident angle insensitivity up to 60° for both transverse electric and transverse magnetic waves. The equivalent circuit is modeled and verified through simulation in Advanced Design Software (ADS). It exhibits an almost zero polarization conversion ratio with a maximum value of 0.002 at 13 GHz. The prototype of the MMA is developed and the measured result shows good similarity with the simulation. Due to polarization and incident angle intensity, and good absorption, this compact MMA can be applied in wireless communication systems including wave shielding from 5G signals, and microwave sensing. [ABSTRACT FROM AUTHOR]

In this paper, a new metamaterial absorber (MMA) is presented that exhibits peak absorptions at 3.26 GHz, 11.6 GHz, and 17.13 GHz within S, X, and Ku bands. The unit cell of the proposed MMA is constructed on an FR4 substrate having an electrical dimension of 0.144λ × 0.144λ, where wavelength, λ is calculated at the lowest absorption frequency. The unique structural design of the unit cell consists of two concentric copper rings with which dumbbell-shaped structures are attached. The rotating symmetrical structural design of this MMA provides around 93.8%, 96.47%, and 99.95% peak absorptance in the mentioned frequencies, which is invariable with the change of incident angle as well as polarization angle. The metamaterial properties of the proposed absorber are studied along with the surface current analysis. The MMA shows single negative behaviour and it also exhibits high-quality factors (Q factor) of 21.73, 41.42, and 51.90 at maximum absorptance frequencies. The MMA is analysed by it's equivalent circuit to understand the resonance phenomenon, which is verified through simulation in Advanced Design Systems (ADS) software. The testing is done on the developed prototype of the proposed MMA. Measurement results are in close proximity to the simulation results. Due to its high Q factor, high EMR, and insensitivity to polarization and angle of incidence, it can be utilized as a part of miniaturized microwave device. In addition, the proposed MMA can exhibit high sensing performance and flexibility to differentiate different oils in S, X, and Ku bands. [ABSTRACT FROM AUTHOR]

In this article, a unique metamaterial (MTM) structure is presented that exhibits four resonances of transmission coefficient (S21) that fall into S, X, and Ku bands. The MTM design is initiated on a Rogers (RT5880) substrate with an electrical dimension of 0.088 λ × 0.088 λ (λ is calculated at 3.424 GHz). The resonating patch contains four quartiles connected by a central metallic strip. The placement of each quartile is such that the whole resonator is mirror symmetric about the vertical axis. Two H-shaped modifiers connect two quartiles of each vertical half of the resonator. These H-shaped modifiers form the resonance cavity in its vicinity, and thus help significantly to orient the overall resonances of the proposed MTM at 3.424 GHz, 10 GHz, 14.816 GHz, and 16.848 GHz. The resonance phenomena are examined through equivalent circuit modeling and verified in Advanced Design Software (ADS). Metamaterial properties of the proposed MTM are extracted and it exhibits negative permittivity, permeability, and refractive index. The prototype of the MTM is fabricated and measurement is taken. The measured S21 shows a close similarity with the simulated result. Moreover, effective medium ratio (EMR) is calculated for the proposed MTM and a high EMR of 10.95 is obtained that expresses its compactness. This compact MTM with negative permittivity, permittivity, and refractive index can be important component for improving the performance of the miniaturized devices for multi-band wireless communication systems. [ABSTRACT FROM AUTHOR]

In this article, a simple metamaterial absorber (MMA) is presented aiming absorption of microwave signals from Wi-Fi frequencies of 2.4 GHz, and 5 GHz. The MMA unit cell constructed on 20 × 20 mm2 FR4 substrate provides maximum absorption of 99.2% and 99.9% at 2.4 GHz and 5 GHz with the flexibility of on-design tuning of maximum absorption frequencies. The tuning metallic stubs connected with the outer ring provide the provision of frequency adjustment from 2.34 GHz to 2.45 GHz, whereas middle ring stubs along with the innermost ring assists for frequency tuning from 4.68 GHz to 5.1 GHz. Due to symmetrical structure, excellent angular stability up to 60° is achieved with near zero cross-polarization effect for both transverse electric (TE) and transverse magnetic (TM) modes of excitation. The measured result of the proposed MMA is analyzed that shows good similarity with the simulated one. Due to its simplistic design within nominal dimension, high absorption, flexibility to frequency tuning, wide angular stability, and no cross-polarization effect, this MMA can be a good candidate for absorber applications in wireless communication systems, especially for wave shielding from Wi-Fi frequencies. [ABSTRACT FROM AUTHOR]

In this article, a symmetric split ring resonator (SRR) based metamaterial (MTM) is presented that exhibits three resonances of transmission coefficient (S21) covering S, C, and X-bands with epsilon negative (ENG) and near zero index properties. The proposed MTM is designed on an FR4 substrate with the copper resonator at one side formed with two square rings and one circular split ring. The two square rings are coupled together around the split gap of the outer ring, whereas two split semicircles are also coupled together near the split gaps. Thus, gap coupled symmetric SRR is formed, which helps to obtain resonances at 2.78 GHz, 7.7 GHz and 10.16 GHz with desired properties of the MTM unit cell. The MTM unit cell's symmetric nature helps reduce the mutual coupling effect among the array elements. Thus, different array of unit cells provides a similar response to the unit cell compared with numerical simulation performed in CST microwave studio and validated by measurement. The equivalent circuit is modelled for the proposed MTM unit cell in Advanced Design System (ADS) software, and circuit validation is accomplished by comparing S21 obtained in ADS with the same of CST. The effective medium ratio (EMR) of 10.7 indicates the compactness of the proposed MTM. A test antenna is designed to observe the effect of the MTM over it. Numerical analysis shows that the proposed MTM have an impact on the antenna when it is used as the superstrate and helps to increase the gain of the antenna by 95% with increased directivity. Thus, compact size, high EMR, negative permittivity, near zero permeability and refractive index makes this MTM suitable for S, C and X band applications, especially for antenna gain with directivity enhancement. [ABSTRACT FROM AUTHOR]

This article presents a novel metamaterial (MTM) with a mirror symmetric resonator that exhibits multiple resonances of transmission coefficient covering the L, S, C, and X bands. The resonating patch is constructed on a low-loss Rogers (RT5880) substrate with a dimension of 20 × 20 × 1.575 mm3. It consists of four equal quartiles with each quartile made with interconnected split-ring resonators; the quartiles are in mirror symmetry with each other. The proposed MTM exhibits resonances at 1.98 GHz, 3.67 GHz, 4.74 GHz, 8.38 GHz, and 10.8 GHz, and electromagnetic characterization is performed through studies of permittivity, permeability, refractive index, and impedances. Power analysis is also performed, and the effect of polarized incident waves is studied. An electromagnetic characterization study reveals that the proposed MTM shows negative permittivity with near-zero permeability and refractive index. It also reveals very little power consumption in the vicinity of the resonances. The dielectric-based frequency tuning is studied by using different dielectric layers over the patch that provides good frequency tuning; this method provides flexibility for adjusting the resonance frequencies in accordance with the application demand. The measured result of the proposed unit cell with the dielectric layer is extracted using a vector network analyzer, and the results exhibit good similarity with the simulated ones. The above-mentioned properties, along with a good effective medium ratio (EMR) of 7.57 indicate that this MTM is suitable for frequency selective applications in microwave devices such as antenna performance improvement and sensing. [ABSTRACT FROM AUTHOR]

This study has investigated the impact of inverse G-like shape resonators that exhibited epsilon negative (ENG) and near-zero refractive index (NZI) properties for multi-band wireless communications applications. The electrical measurement of structure is 0.118λ × 0.118λ × 0.021 λ, which is calculated at 3.94 GHz. FR-4 is used as a substrate layer, and the resonator is designed on it. This structure is manifested in the ENG and NZI characteristics within the frequency range of 3.8–4.17, 7.68–8.54, 10.67–11.36 GHz, and 4.07–4.15 and 8.29–8.37 GHz, respectively. This study also manifests the polarization insensitivity nature of 0°–90°, and the incident angle is investigated up to 60° for both TE and TM modes. The proposed structure achieves triple resonance at 3.94 GHz, 8.08 GHz, and 11.17 GHz, respectively, included in the S, C, and X frequency bands. The CST Microwave Studio 2019 software is conducted to design, develop, perform analysis, investigate electromagnetic properties, and extract effective medium parameters. The Advanced Design Software (ADS) is used to model the equivalent circuit of the unit cell. The simulated, measured, and ADS results verified the scattering parameter performance. The EMR value of the structure is 8.47, indicating the structure's compactness. The compact design with simplicity, ENG, and NZI properties make the proposed structure significant for microwave application, mainly to enhance the antenna bandwidth and gain filter design. ENG and NZI properties the operation frequency stability and efficiency for low earth orbit nanosatellite communications. [ABSTRACT FROM AUTHOR]

In this paper, a tuned metamaterial (MTM) consisting of a symmetric split ring resonator is presented that exhibits epsilon negative (ENG), near zero permeability and refractive index properties for multiband microwave applications. The proposed metamaterial is constituted on a Rogers (RT-5880) substrate with 1.57 mm thickness and the electrical dimension of 0.14λ × 0.14λ, where wavelength, λ is calculated at 4.2 GHz. The symmetric resonating patch is subdivided into four equal and similar quartiles with two interconnecting split rings in each quartile. The quartiles are connected at the center of the substrate with a square metal strip with which four tuning metal strips are attached. These tuning metal strips are acted as spacers between four quartiles of the resonator patch. Numerical simulation of the proposed design is executed in CST microwave studio. The proposed MTM provides four resonances of transmission coefficient (S21) at 4.20 GHz, 10.14 GHz, 13.15 GHz, and 17.1 GHz covering C, X and Ku bands with negative permittivity, near zero permeability and refractive index. The calculated effective medium ratio (EMR) is 7.14 at 4.2 GHz indicates its compactness. The resonance frequencies are selective in nature which can be easily tuned by varying the length of the tuning metal stubs. The equivalent circuit of the proposed MTM is modelled in Advanced Design Software (ADS) that exhibits a similar S21 compared with CST simulation. Surface current, electric and magnetic fields are analyzed to explain the frequency tuning property and other performances of the MTM. Compact size, ENG with near zero permeability and refractive index along with frequency selectivity through tuning provides flexibility for frequency selective applications of this MTM in wireless communications. [ABSTRACT FROM AUTHOR]

In this paper, a meander-lines-based epsilon negative (ENG) metamaterial (MTM) with a high effective medium ratio (EMR) and near-zero refractive index (NZI) is designed and investigated for multiband microwave applications. The metamaterial unit cell is a modification of the conventional square split-ring resonator in which the meander line concept is utilized. The meander line helps to increase the electrical length of the rings and provides strong multiple resonances within a small dimension. The unit cell of proposed MTM is initiated on a low-cost FR4 substrate of 1.5 mm thick and electrical dimension of 0.06λ × 0.06λ, where wavelength, λ is calculated at the lowest resonance frequency (2.48 GHz). The MTM provides four major resonances of transmission coefficient (S21) at 2.48, 4.28, 9.36, and 13.7 GHz covering S, C, X, and Ku bands. It shows negative permittivity, near-zero permeability, and near-zero refractive index in the vicinity of these resonances. The equivalent circuit is designed and modeled in Advanced Design System (ADS) software. The simulated S21 of the MTM unit cell is compared with the measured one and both show close similarity. The array performance of the MTM is also evaluated by using 2 × 2, 4 × 4, and 8 × 8 arrays that show close resemblance with the unit cell. The MTM offers a high effective medium ratio (EMR) of 15.1, indicating the design's compactness. The frequency hopping characteristics of the proposed MTM is investigated by open and short-circuited the three outer rings split gaps by using three switches. Eight different combinations of the switching states provide eight different sets of multiband resonances within 2–18 GHz; those give the flexibility of using the proposed MTM operating in various frequency bands. For its small dimension, NZI, high EMR, and frequency hopping characteristics through switching, this metamaterial can be utilized for multiband microwave applications, especially to enhance the gain of multiband antennas. [ABSTRACT FROM AUTHOR]

This paper represents a penta band square enclosed star-shaped modified split ring resonator (SRR) based single negative meta-atom absorber (MAA) for multi-band microwave regime applications. FR-4 low-cost material has been used as a substrate to make the MAA unit cell with 0.101λ0 × 0.101λ0 of electrical size, where λ0 is the wavelength calculated at the lower resonance frequency of 3.80 GHz. There are two outer square split ring and one inner star ring shape resonator of 0.035 mm thickness of copper placed on the one side, and another side of the substrate has full copper to construct the desired unit cell. The MAA unit cell provides five absorption peaks of 97.87%, 93.65%, 92.66%, 99.95%, and 99.86% at the frequencies of 3.80, 5.65, 8.45, 10.82, and 15.92 GHz, respectively, which covers S-, C-, X-, and Ku- bands. The properties of MAA have been investigated and analyzed in the E-, H-fields and surface current. The EMR and highest Q factor of the designed MAA is 9.87 and 30.41, respectively, and it shows a single negative (SNG) property. Different types of parametric analysis have been done to show the better performance of absorption. Advanced Designed System (ADS) software has been used for equivalent circuit to verify the simulated S11 result obtained from the CST-2019 software. Experimental outcomes of the MAA unit cell have a good deal with the simulated result and measured result of the 24 × 20 array of unit cells also shown. Since the unit cell provides superior EMR, excellent Q-factor, and highest absorption so the recommended MAA can be effectively used as a penta band absorber in microwave applications, like notch filtering, sensing, reducing the unintended noise generated with the copper component of the satellite and radar antennas. [ABSTRACT FROM AUTHOR]

In this article, introduce a metamaterial for microwave absorber applications based on a variant of the symmetric plus-shape resonator. This MA has two absorption peaks, making it suitable for Ku frequency band use. The MA unit cell built on a cheap FR4 substrate. The unit cell's resonator is designed in the form of a four-plus-shape with an eight-square-point in one of the corners, and its dimensions have been tweaked to achieve maximum absorption peaks of 99.04%, and 99.90% at 12.32 GHz, and 16.00 GHz, respectively. Analysing the surface current, electric and magnetic fields, permittivity, permeability, and normalised impedance provides insight into the nature of metamaterial and absorber. The incidence and polarization angle insensitivity of the suggested dual-band absorber allows for pretty much constant absorbance efficiency when the angle is changed. Moreover, for both TE mode and TM mode, the developed metamaterial absorber demonstrates near unity absorption for polarization and oblique incident angles up to 90°. These are single negative metamaterial qualities. The fact that the patch as a whole is rotationally symmetrical is one of the most important factors in determining whether or not it will retain its polarization-insensitive quality. Because of its outstanding insensitivity performance and nearly perfect absorption, it could be a good option for use in Ku band applications. • The purpose of this study is to show an incidence and polarization angle insensitivity with single negative characteristics that is capable of functioning as a perfect absorber for Ku band application. • The MA in question was developed a minimal FR-4 material with actual dimensions of 16 mm × 16 mm, as well as simulation was used to investigate its characteristics. • The unit cell has a single negative behaviour in addition to three S11 resonances located at 12.32, and 16.00 GHz. During the simulation, an absorption of 99.04%, and 99.90% was shown to occur at the two different resonance frequencies of S 11. • The findings the simulation are validated by creating a prototype and analysing its performance using the data obtained from the simulation. • Overall, the suggested MMA is suitable for usage in dual band wireless applications for Ku band because to its incident and polarization angle insensitivity for both TE and TM modes, high Q factors, as well as 99% highest peak absorption. [ABSTRACT FROM AUTHOR]

A terahertz (THz) wave technology is very appealing for applications in detection in biomedicine, biological spectroscopy, material characterization, detection, imaging, sensing, and other convenient applications. Metamaterials (MMs) are artificial structures that have structures in a regular periodic arrangement and don't exist in nature. By utilizing a proposed terahertz metamaterial absorber, a broad spectrum of adulterated lubricants can be detected. It is an efficient detection process that enables the development of a THz detection approach by making use of the metamaterial as a sensor. The proposed terahertz absorber is analyzed and optimized using the CST Microwave Studio 2019 software. The article proposed a multiband THz metamaterial absorber with a unit size of 70 µm. According to the demonstrated results, we can achieve five narrow absorption peaks with perfect absorption within the frequency range between (0.2–4.2) Terahertz. Also, the result shows that, the average absorbance of 99.07% at the resonance frequencies of 0.56, 1.42, 2.676, 3.14, and 3.89 THz. The E (electric) and H (magnetic)-field distributions on the resonator at different resonance frequencies were also analyzed as well as. The recommended metamaterial absorber has a good sensing capability at different resonant frequencies, with refractive index sensitivities of 80 GHz/RIU, 240 GHz/RIU, 480 GHz/RIU, 480 GHz/RIU, and 520 GHz/RIU obtained by modifying the refractive index of the sample holder or the analytic layer, respectively. As a result, the proposed detector has a high refractive index sensitivity, high Q-factor, and high FOM, making it suitable for detecting oil adulteration. [ABSTRACT FROM AUTHOR]

• Quad-band metamaterial: 99.98% absorption, versatile signal management at microwave frequencies. • Unique double elliptical split ring resonator: enhanced absorption in TE and TM modes. • Insensitivity to polarization and incidence angle (0° to 90°): versatile applications. • High harvesting efficiencies up to 94.12%: ideal for RF energy harvesting. • Experimental results match simulations, affirming suitability for diverse applications, including stealth and radar systems. In this article, a double elliptical split ring resonator-based quad band metamaterial absorber (MMA) is demonstrated for applications in the microwave range. The resonator is made up of four squares outside split rings and two elliptical split rings positioned in the middle of the structure. The resonating patch is placed over an FR-4 dielectric layer with a thickness of 1.6 mm. The unit cell has an electrical size of 0.103λ 0 × 0.103λ 0 , where λ 0 is the wavelength determined at 2.576 GHz. The MMA shows maximum absorption of 99.83% at 2.576 GHz, 99.98% at 5.648 GHz, 99.56% at 8.32 GHz, and 99.15% at 13.456 GHz with TE mode. For TM mode, at 2.576 GHz, 5.632 GHz, 8.304 GHz, and 13.44 GHz, corresponding absorptions are 99.21%, 99.67%, 99.5%, and 99%, respectively. The MMA is polarisation and incidence angle (0° to 90°) insensitivity for both TM and TE modes. The unit cell provides single negative characteristics including an EMR (effective medium ratio) of 9.71 and a Q factor (quality factor) over 25. The proposed MMA provides high harvesting efficiencies of 92.87%, 76.9%, 94.12%, and 90.97% for frequencies of 2.57 GHz, 5.64 GHz, 8.32 GHz, and 13.45 GHz, correspondingly. The equivalent circuit is modeled to understand the resonance behavior of the MMA and the circuit parameters are determined and validated using Advanced Design Systems (ADS) software. The performance of the MMA is examined using the prototype of the array of the unit cells in an experimental setup. The experimental outcome provides a close similarity with simulation outcomes indicating the good performance of the MMA. The metamaterial absorber's high performance makes it suitable for many applications, such as RF energy harvesting applications, image technologies, stealth technologies, and radar systems as well as minimizing electromagnetic interference in satellites. [ABSTRACT FROM AUTHOR]