Search

Abstract: Phillips type polyethylene stabilised with combinations of 700 ppm phenolic antioxidant and different amounts of various phosphorous stabilisers (sterically hindered aryl phosphite [Hostanox PAR 24], phosphonite [Sandostab P-EPQ], and aryl–alkyl phosphine [PEPFINE]) was processed by six consecutive extrusions. The polymer was characterised by FT-IR spectroscopy, rheological (melt flow index, creep compliance), colour and oxidation induction time measurements. Films were prepared by blowing and their mechanical strength was determined by Elmendorf and dart drop tests. The consumption of the antioxidants was compared to the characteristics of the polymer and to the strength of the films. The consumption rate of both the phenolic and the phosphorous antioxidants is reduced in their combinations compared to single antioxidants. The chemical structure of the polymer is modified considerably in the first extrusion even at high antioxidant levels. The mechanism of stabilisation is determined by the type of the antioxidant(s) in further processing steps. The phenolic antioxidant does not prevent the formation of long chain branches. The phosphonite and the phosphine hinder efficiently hydrogen abstraction from the polymer chain and long chain branching. Their efficiency is similar, but the phosphonite is consumed fast, while the phosphine oxidises slowly. The investigated phosphite is less reactive; the contribution of the phenolic antioxidant to the inhibition reactions is significant in phenol/phosphite combinations, therefore long chain branching increases continuously with increasing number of processing steps. [Copyright &y& Elsevier]

Abstract: The role of a phenolic and three phosphorous (phosphite, phosphonite and phosphine) antioxidants in the melt stabilisation of polyethylene was studied in a Phillips type polyethylene by multiple extrusions. The polyethylene was stabilised with a single antioxidant at 700 ppm and with phenolic/phosphorous antioxidant combinations containing 700 ppm of each component. The functional groups (methyl, vinyl, vinylidene, trans-vinylene and carbonyl) of polyethylene and the residual amount of phosphorous antioxidants were analysed quantitatively by FT-IR methods developed in our laboratory. The rheological characteristics, the colour and the residual thermo-oxidative stability of the polymer were determined and compared. Blown films were prepared and their mechanical strength measured by the Elmendorf and Dart-drop tests. The comparison of the different characteristics revealed that the chemical reactions taking place during the first processing of the nascent polymer powder, as well as the chemical composition of the antioxidants determine the reactions taking place in further processing operations. The changes in the characteristics of stabilised polyethylene during processing are controlled by the phosphorous stabiliser. The effect and final result depend on the chemical structure of the given antioxidant. The phenolic antioxidant itself does not hinder the formation of long chain branches. It reduces the rate of oxidation of the various phosphorous stabilisers, but does not modify the mechanism of stabilisation of the phosphonite and the phosphine. The reactions of the phosphite are significantly modified by the presence of a phenolic antioxidant. [Copyright &y& Elsevier]

Abstract: Different aspects of the melt stabilising effect of various antioxidant packages were studied in a Phillips type polyethylene in the work described in this series of papers. The polymer was stabilised with various combinations of a phenolic antioxidant with phosphite, phosphonite, and phosphine type secondary antioxidants and processed by multiple extrusions followed by film blowing. After determining the role of the antioxidants in the melt stabilisation process and the effect of antioxidant consumption on polymer properties the correlation of the rheological characteristics of polymer with the tear and impact strengths of films is discussed in this paper. The Elmendorf tear strength of films measured in transverse direction, which is sensitive to long chain branching, correlates closely with viscous compliance determined by creep recovery experiments and the ratio of melt flow indices measured at high and low loads. The relationships are independent of the type and amount of antioxidant added. This makes possible the prediction of the effect of various antioxidant packages on film properties on the basis of rheological measurements. The correlation between the dart drop impact strength of the films and the rheological characteristics of the polymer is less reliable. [Copyright &y& Elsevier]