Search

The northwestern South China Sea (NW-SCS) presents a spatial-temporal evolution of its source-to-sink (S2S) system, that recorded the movement of the Indochina block and the collision between the Indian and Eurasian plates. However, complex tectonic movements and topographic evolution have led to controversial studies about the spatial-temporal distribution of allogenic materials and autogenic sediments. In this study, we integrated a number of multiscale data to review the S2S system evolution of the northwestern area of the South China Sea from the Eocene to the Miocene. The series include the initial synrift, postrift and thermal subsidence stages. First, we identified the major sediment pathways using seismic profile interpretation. We reconstructed the sediment distribution and lithofacies association within the dispersal sink area based on seismic data, core samples and grain-size analysis. We quantitatively studied the sediment flux and catchment area based on mass balance calculation modeling. Following this, we acquired rare-earth element (REE) data and zircon U–Pb age data from the bedrocks of the continental blocks and the South China Sea Cenozoic basement and rivers in the NW-SCS area to restore the provenance area and evaluate the migration distance by inspecting the heavy mineral assemblages. According to the above studies, three phases of S2S dynamics were identified. 1) The initial rifting stage occurred during the Eocene, and active rifting in the South China Sea induced a major topographic change. A large amount of autogenic slump sediments and a smaller amount of paleo-Red River sediments were injected into the Beibu Gulf Basin (BBGB) and the Yinggehai-Song Hong Basin (YGHB). 2) The postrift stage occurred during the Oligocene. Regional uplift and tectonic inversion probably linked to the clockwise rotation of the Indochina Block, broke the connection between the Beibu Gulf Basin and the Red River catchments. The paleo-Qin River and the paleo-Lian (Nanliu) River brought a large amount of clastic material into the Beibu Gulf Basin from the Cathaysia Block. 3) The thermal subsidence stage occurred during the Miocene: the eastward topographic tilt was enhanced, and the drainage basin entered postrift stage. The development of the Paleo-Red River and its branches, the Lam River and the Ma River, brought distal sediment into the YGHB, while the rivers in the west Cathaysia Block transported sediment into the BBGB. Statistical analysis of the S2S system parameters suggests that the average terrain altitude played a dominant role in determining the S2S system volume during the Eocene, while the dominant role transferred to the sediment supply during the Oligocene and Miocene. • Reconstructs the Source to sink system within NW-SCS from the Eocene to the Miocene. • Reveal the drainage evolution of basins in NW-SCS with multiple dates. • Put out the impact factors to the Source-to-Sink system developed during the rifting process. [ABSTRACT FROM AUTHOR]

The Bohai Bay Basin, a typical intracontinental rift basin, records East Asia's kinematic plate history during the Cenozoic. The rifting process was driven by the counterclockwise rotation in the direction of the Pacific Plate subduction. From the early Eocene to the Oligocene, the rifting process can be divided into three stages: extension initiation, peak extension, and post-extension. The corresponding rifting rate was calculated based on 40Ar-39Ar data. Then, the provenance area evolution of the above three rifting stages was established by combining the detrital zircon U–Pb data and heavy mineral assemblage data (ZTR, GZi, and ATi). According to the results calculated by 40Ar/39Ar analysis, the topography of the sink area in the western Bohai bay basin was characterized by moderately rising subsidence rates (100 m/Ma) during the extension initiation stage (Paleocene-Early Eocene), when surface drainage was restricted to a limited area with steep channel slopes. During this stage, referring to the core description and seismic interpretation results, the fan delta distributes most of the sediment, most of which migrates from the proximal region. Until the peak extension stage, the source-sink system develops as the rate of subsidence increases (200 m/Ma), making the sink area larger, and this period involves multiple types of pathways, including synsedimentary faults and erosional valleys. Sediments from Taihang Massif and Jiaoliao Massif infill the subsidence zone at the distal end. Then, in the post-extension stage, the source-sink systems involve a multi-provenance area (i.e., sourcing from both proximal and distal areas), a large sink area, and a gentle channel gradient due to a decrease in subsidence rate (60–80 m/Ma). Catchment relief, sediment migration distance, and average fault displacement were used, and these parameters were related to the sediment supply (Qs) for the three rifting stages. We find that during extension initiation and peak extension, the source-to-sink systems show a high amount of sand influx (Q sand /) and that the ratio Q sand /Qs total shows a proportional relationship with catchment relief and average fault displacement; this relationship is inversely proportional to the catchment-unit area. Also, according to the types of pathways, we classified the source-to-sink systems during this period into three types, steep eroded pathway (Type-I S2S), gentle slope developed with several boundary faults (Type-II S2S), steep slope with observably eroded valleys or fault-troughs (Type-III S2S). The ratio of Q sand /Qs is only related to the sediment migration distance and average fault displacement in the post-extension stage. Besides the above three types of source-to-sink systems, we found that multi-stage faults developed along the slope (Type-IV S2S) predominated during this stage. • Calculated rifting rate in Bozhong Depression. • Identified the provenance area evolution in Bozhong Depression during Paleogene. • Classified four types of Source-to-sink patterns corresponding to the rifting stage. • Put out the dominated factors to S2S system developed during various rifting stages. [ABSTRACT FROM AUTHOR]

Although volcanism is an important process in the evolution of rift basins, current tectono‐sedimentary models largely neglect its impact on sediment supply, transport pathways, and depositional systems. In this paper, we integrate core, well logs, and 3D seismic data from the Palaeogene‐Neogene Shaleitian (SLT) uplift and surrounding sub‐basins, Bohai Bay Basin, China, to investigate the sedimentology and geomorphology of a volcanic rift basin. Results of this study show that the spatial distribution of extrusive centres was strongly controlled by basement‐involved intra‐basin normal faults. During the early part of the syn‐rift stage, the SLT uplift supplied sediments to transverse fan deltas and braided‐river deltas that fringed the adjacent syn‐rift depocentres. Volcanic deposits mainly occurred as relatively thin lava flow and pyroclastic facies that partially filled fault‐controlled topographic lows, reducing topographic rugosity, and enhanced breaching of basement highs between syn‐rift depocentres. Integration of drainage to the syn‐rift depocentres and development of through‐flowing axial depositional systems was enhanced. During the later part of syn‐rift and in early post‐rift stages, the SLT uplift was progressively inundated, reducing sediment supply to the fringing transverse depositional systems. In contrast, axial braided‐river deltas became the main depositional systems, sourced by large hinterland drainage from the Yanshan fold‐belt to the northwest. Volcanism in the late syn‐rift and early post‐rift occurs as thick lava flow and pyroclastic facies that infill rift topographic lows and locally blocked axial fluvial systems creating isolated lakes. Within hanging wall depocentres, volcanic topographic highs split and diverted axial fluvial and deltaic systems. Furthermore, volcanism supplied large volumes of volcanic sediment to the rift resulting in increased sedimentation rates, and the development of unstable subaerial and subaqueous slopes and deposits, increasing the occurrence of landslides. Based on the observations of this study we update tectono‐sedimentary models for rift basins to include volcanism. [ABSTRACT FROM AUTHOR]

[Display omitted] • Classify the episodically rifting processes in PRMB according to their rifting rates. • Identified the provenance evolution in the North PRMB during the Eocene-Oligocene. • Quantitative analysis of the dominated factor to the S2S system developed. Pearl River Mouth Basin (PRMB) is a typical episodically rifting basin, and its sediment records exhibit a multistage infilling process. To build the coupling relationship between the spatial variability of tectonic movement and sediment dispersal pattern, we character the source-to-sink system distribution within continental margin and analysis their dominated factors with quantitative statistical methods. First, we identify the faults and calculate the rifting rate by interpreting the two-dimensional (2D) seismic data and zircon or apatite fission-track data (ZFT/AFT). Accordingly, based on the various trending of the rifting rate evolution, we classified rifting process episodically into three patterns: accelerated rifting decelerated rifting, and uniform rifting. Then, we integrated the data available on detrital zircon U–Pb, rare earth element, and heavy mineral assemblage to identify the responding S2S components associated with the above various rifting processes. Results show that in the first tectonic stage during the early Eocene, the sediments were mainly sourced from an intrabasin provenance area, whereas in the late Eocene to the Oligocene, the paleo-Pearl River provided the sediments to the sink area. We restore the facies association of the sink area by studying the core samples, electric well logs, and three-dimensional (3D) seismic data. During the accelerated and uniform rifting processes, coarse-grained deposited along the boundary faults, which includes the fan delta and subaqueous fans. During decelerated rifting, the depositional environment was dominated by braided channels, meandering channels, and tide-influenced channel accretion. Based on the quantitative analysis the relationship between the grain size of the sediment in each S2S segment and the rifting rate, more fine-grained components were preserved in the decelerated rifting system, while coarse-grained sediments fill the accelerated rifting depression and uniform rifting components. Furthermore, the sediment supply and relative height can influence the volume of the S2S system in the uniform rifting system. In the decelerated rifting basin, the sediment supply is the major factor associated with the development of S2S, whereas the relative height is the major factor associated with the accelerated rifting basin. [ABSTRACT FROM AUTHOR]

Sedimentary features of a source-to-sink (S2S) system produce distinct responses to diverse bedrock types (i.e., silicate and carbonate rocks) in the catchment; these majorly influence the sediment flux, volume, and grain size in the sink area. By comparing a modern S2S system of Holocene Erhai Lake Basin (ELB) (in southwestern China) and an ancient S2S of Eocene western Offshore Bohai Bay Basin (OBBB) (in eastern China), we investigated the differences and proportional ranges among sandy sediment flux (Q f) and sediment discharge (Q s) from catchment associated with diverse bedrock types in a humid and subtropical lacustrine rift basin by combining with the Google-topographic-map, BQART-model, and seismic-geomorphology analysis. Based on geomorphological and 3D visualization analysis, we identified the differences among multiscale catchment-fluvial segments and their sedimentary responses in S2S systems, and then extracted parameters of catchment-unit area (A), catchment relief (R), and total sediment discharge (Q s , calculated by BQART model). Furthermore, we analyzed sediment-dispersal patterns and sandy sediment fluxes in the nearshore (Q f) using regional geologic data, outcrops and the Google Earth database in the Holocene ELB, and using seismic geomorphology in the Eocene western OBBB. Finally, quantitative analysis of the modern and ancient S2S segments was used to investigate the total sandy sediment flux (Q f), which is supplied by >60% of the entire sediment discharge (Q s) for catchments with silicate bedrocks (e.g., metamorphic rock and granite), while the ratio Q f /Q s corresponding to carbonate bedrocks is less than 30%. Additionally, the ratio Q f /Q s for catchments with mixed silicate carbonate bedrocks ranges between 30% and 60%. These results not only provide a new perspective for investigating sandy sediments in a subtropical lacustrine rift basin, but also yield implications for better understanding of continental S2S system theory for diverse bedrock types. • Divide the modern and ancient source-to-sink (S2S) segments into multi-order catchment units and fan-lobes. • Extract the kernel parameters of sediment discharge from catchments and sediment flux of proximal fans. • Discuss the proportional range between sandy sediment flux and sediment discharge associated with diverse bedrock types. • Establish a flux model of source-to-sink segments with diverse bedrock types in subtropical lacustrine rift basins. [ABSTRACT FROM AUTHOR]

During the Eocene, the western Shaleitian Uplift and its adjacent sags constituted a source-to-sink (S2S) system on an active lacustrine basin margin with a steeply dipping boundary fault. We integrated a range of data types with subsurface observations from the western offshore Bohai Bay Basin (OBBB) that allowed us to quantify the size and classification of catchment-fluvial segments, and analyze the sedimentary architecture and sediment fluxes of the proximal fan-delta system. We then discovered quantitative coupling relationships among the parameters of ancient source-to-sink segments. Results show that in the study area the bedrock of the western Shaleitian Uplift is composed of Proterozoic migmatized granites or granites. On the basis of paleogeomorphology reconstruction, we established classification standards for multi-scale catchment units, divided the provenance into four third-order catchment units, obtained quantitative parameters of the catchment-unit area (A), catchment relief (R), and total sediment discharge (Q s , calculated by BQART model) and then confirmed the scales and distribution (cross-sectional area, S cs) of sediment-transport pathways. Furthermore, we analyzed tectonic subsidence, sediment-dispersal patterns, and sediment fluxes of fan-delta systems (Q f) using seismic sedimentology in the third member of the Eocene Shahejie Formation (Es 3). Finally, we used quantitative, multivariate, statistical analysis of the parameters involved in the source-to-sink segments to (1) show the proportional range between total sediment fluxes of fan delta (Q f) and sediment discharge (Q s) from catchment (largest rate of Q f /Q s in the lower part of Es 3 , smallest rate of Q f /Q s in the middle part of Es 3 , and the range from 30% to 70%) and (2) arrange the mainly controlled parameters in terms of their importance (i.e., rate of tectonic subsidence, catchment area, catchment relief, and cross-sectional area of sediment-transport pathway are listed in order of importance). This study can provide an effective way of quantifying and ordering the parameters important in that controlling a complex ancient source-to-sink system, thus helping to achieve an understanding of the process of tectono-sedimentary evolution on a rifted, lacustrine-basin margin. • Divide the catchment segment into different orders and pick up the main parameters. • Indicate the sediment-dispersal patterns and sediment flux of fan-deltas in an active extensional setting. • Reveal the correlation and ordering of multiple important parameters of ancient source-to-sink in a rift basin margin. [ABSTRACT FROM AUTHOR]

In multi-phase rift basins, the links between fault activities and sequence stratigraphic architectures are still poorly understood compared to single-rift basins. The purpose of this work is to give implications for tectono-stratigraphic signatures in multiphase rifts based on seismic data from the Zhu-3 Depression in the Pearl River Mouth Basin, China. Stratigraphically, three composite sequences (CS1-3) defined by major unconformities in the Paleogene successions of the Zhu-3 Depression are interpreted, with each one subdivided into two or three third-order sequences. Regional unconformities and basin configurations indicate two episodic rift phases, termed rift phase 1 (formed CS1), and rift phase 2 (formed CS2) followed by a lithospheric breakup phase (formed CS3). From rift phase 1 to rift phase 2, the basin evolved from small-sized, independent half-grabens into relatively large-scale grabens and finally a dish-like basin configuration. Fault displacement and stratigraphic stacking patterns revealed three distinctive structural stages of rift phase 1: rift initiation (WC-SQ1), rift development (WC-SQ2), and rift termination (WC-SQ3) stages. However, an immediate decrease in fault activity was recorded in the rift phase 2. Immediate strain localization under rotated extension fields during episodic rift phases led to variabilities in tectono-stratigraphic architectures. In turn, this transition may likely contribute to interpreting the depositional pattern from balanced infill during rift phase 1 to an overfilled pattern during rift phase 2 as well as the breakup stage in response to possible enhanced sediment supply. This work enhanced our understanding of additional hydrocarbon evaluations in the Zhu-3 Depression, South China Sea. • The Eocene-Oligocene sequence framework in the Zhu-3 rift are systematically reported. • Fault pattern, basin geometry and drainages basin in episodic rift phases are illustrated. • Tectono-stratigraphic signatures of three rift cycles in the Zhu-3 rift are proposed. • Controls of boundary fault arrays evolution on two-phase rift development are discussed. [ABSTRACT FROM AUTHOR]