Search

The purpose of this study is to validate a Jacobian-based iterative method for real-time localization of magnetically controlled endoscopic capsules. The proposed approach applies finite-element solutions to the magnetic field problem and least-squares interpolations to obtain closed-form and fast estimates of the magnetic field. By defining a closed-form expression for the Jacobian of the magnetic field relative to changes in the capsule pose, we are able to obtain an iterative localization at a faster computational time when compared with prior works, without suffering from the inaccuracies stemming from dipole assumptions. This new algorithm can be used in conjunction with an absolute localization technique that provides initialization values at a slower refresh rate. The proposed approach was assessed via simulation and experimental trials, adopting a wireless capsule equipped with a permanent magnet, six magnetic field sensors, and an inertial measurement unit. The overall refresh rate, including sensor data acquisition and wireless communication was 7 ms, thus enabling closed-loop control strategies for magnetic manipulation running faster than 100 Hz. The average localization error, expressed in cylindrical coordinates was below 7 mm in both the radial and axial components and 5$^\circ$ in the azimuthal component. The average error for the capsule orientation angles, obtained by fusing gyroscope and inclinometer measurements, was below 5$^\circ$. [ABSTRACT FROM PUBLISHER]

Cochlear implant surgery is a procedure that requires delicate insertion of an electrode array into the inner ear. This paper reports the clinical motivation, design considerations, analysis, and design optimization of a new robot for electrode arrays insertion. This paper describes a new approach for coordinated insertion of perimodiolar electrode arrays in order to minimize shape discrepancy between the shape of the electrode array and the shape of the inner ear anatomy. A new design of a 3-degrees-of-freedom (DoF) parallel robot with wire-actuated prismatic legs is presented. The dimensional synthesis of the robot design was based on satisfying the accuracy, speed, system size, and workspace requirements. The robot prototype is validated experimentally to execute electrode insertions in plastic models of temporal bones. [ABSTRACT FROM PUBLISHER]

During exploration through tortuous unstructured passages by continuum robots, methods are required to minimize the force interaction between the environment and the robot along its length. This paper presents and evaluates an algorithm for compliant motion control of continuum robots subjected to multiple unknown contacts with the environment. A mapping of external wrenches to a generalized force in the configuration space of a multisegment continuum robot is presented and related to measured joint-level actuation forces. These measurements are applied as inputs to a low-level compliant motion controller. Friction and modeling uncertainties, presenting an unknown nonlinear deviation from the nominal system model, are corrected via a feed-forward estimate provided by a support vector machine. The controller is evaluated on Ø9 and Ø5 mm multisegment continuum robots. We quantify the minimal interaction forces needed to generate compliant motion and demonstrate the ability of the controller to minimize interaction forces during insertion through tortuous passages. [ABSTRACT FROM PUBLISHER]

Single port access surgery (SPAS) presents surgeons with added challenges that require new surgical tools and surgical assistance systems with unique capabilities. To address these challenges, we designed and constructed a new insertable robotic end-effectors platform (IREP) for SPAS. The IREP can be inserted through a Ø15 mm trocar into the abdomen and it uses 21 actuated joints for controlling two dexterous arms and a stereo-vision module. Each dexterous arm has a hybrid mechanical architecture comprised of a two-segment continuum robot, a parallelogram mechanism for improved dual-arm triangulation, and a distal wrist for improved dexterity during suturing. The IREP is unique because of the combination of continuum arms with active and passive segments with rigid parallel kinematics mechanisms. This paper presents the clinical motivation, design considerations, kinematics, statics, and mechanical design of the IREP. The kinematics of coordination between the parallelogram mechanisms and the continuum arms is presented using the pseudo-rigid-body model of the beam representing the passive segment of each snake arm. Kinematic and static simulations and preliminary experiment results are presented in support of our design choices. [ABSTRACT FROM PUBLISHER]

In this paper, we present a novel kinematic-based framework for collision detection and estimation of contact location along multisegment continuum robots. Screw theory is used to define a screw motion deviation (SMD) as the distance between the expected and the actual instantaneous screw axis (ISA) of motion. The expected ISA is computed based on the unconstrained kinematics model of the robot, while the actual ISA is computed based on sensory information. Collisions with rigid environments at any point along the robot are detected by monitoring the SMD. Contact locations are estimated by the minimization of the SMD between the ISA that is obtained from a constrained kinematic model of the continuum robot and the one that is obtained from sensor data. The proposed contact detection and localization methods only require the relative motion of each continuum segment with respect to its own base. This strategy allows the straightforward generalization of these algorithms for an n -segment continuum robot. The framework is evaluated via simulations and experimentally on a three-segment multibackbone continuum robot. Results show that the collision-detection algorithm is capable of detecting a single collision at any segment, multiple collisions occurring at multiple segments, and total-arm constraint. It is also shown that the estimation of contact location is possible at any location along the continuum robot with an accuracy better than 20% of the segment nominal length. We believe this study will enhance manipulation safety in unstructured environments and confined spaces. [ABSTRACT FROM PUBLISHER]