Search

High‐breakdown‐point estimators of multivariate location and shape matrices, such as the MM‐estimator with smoothed hard rejection and the Rocke S‐estimator, are generally designed to have high efficiency for Gaussian data. However, many phenomena are non‐Gaussian, and these estimators can therefore have poor efficiency. This article proposes a new tunable S‐estimator, termed the Sq‐estimator, for the general class of symmetric elliptical distributions, a class containing many common families such as the multivariate Gaussian, t‐, Cauchy, Laplace, hyperbolic, and normal inverse Gaussian distributions. Across this class, the Sq‐estimator is shown to generally provide higher maximum efficiency than other leading high‐breakdown estimators while maintaining the maximum breakdown point. Furthermore, the Sq‐estimator is demonstrated to be distributionally robust, and its robustness to outliers is demonstrated to be on par with these leading estimators while also being more stable with respect to initial conditions. From a practical viewpoint, these properties make the Sq‐estimator broadly applicable for practitioners. These advantages are demonstrated with an example application—the minimum‐variance optimal allocation of financial portfolio investments. [ABSTRACT FROM AUTHOR]

Due to physical or control-related limitations, some dynamic state variables are constrained, such as the regulated voltage, the exciter reference voltage, etc. In addition, there exists a set of algebraic constraints that exactly confines the evolution of the system states. However, a systematic way to fully consider all inequality and equality constraints is lacking in the existing dynamic state estimation (DSE) literature. This paper proposes a general constrained robust DSE framework that is able to deal with various equality and inequality constraints. The project operator is integrated with the pseudo-measurements formulation in a unique manner to address the inequality and equality constraints, respectively, within the unscented Kalman filter (UKF) framework, which relies on the unscented transformation and is derivative-free. To this end, the derivative-free robust UKF is extended to address all the constraints while maintaining its robustness to measurement noise and bad data. Numerical results on the IEEE 39-bus system show that the proposed method exhibits the following benefits: first, improved accuracy of the state estimates in the presence of measurement noise; second, enhanced convergence speed and ability to address weakly observed dynamic state variables; and third, enhanced capability to deal with bad data and cyber attacks. [ABSTRACT FROM AUTHOR]

Real-time state information provided by the state estimator plays a major role in power system monitoring and control. As a result, the convergence of the estimator under various system operating conditions becomes one of the key requirements. In this paper, a state estimation framework that achieves both statistical and numerical robustness is proposed. This estimation framework also generalizes several well-known estimators, including the weighted least squares estimator, the least absolute value estimator, the Huber Maximum-likelihood-estimator, and the Schweppe-type Huber generalized Maximum-likelihood (SHGM)-estimator. The statistical robustness of each estimator has been studied analytically through the total influence function. In addition, the dependence between the statistical robustness of an estimator and the numerical robustness of the iterative algorithm is investigated. To enhance the numerical robustness of the iterative algorithm that solves the SHGM-estimator, a fourth-order Levenberg–Marquardt approach-based SHGM (LM-SHGM) estimator is proposed. It integrates the statistical robustness of that estimator to address various types of bad data and the numerical robustness of the LM approach to handle highly stressed operating conditions. Numerical results carried out on the IEEE test systems demonstrate the good convergence and robustness of the proposed approach under various operating conditions. [ABSTRACT FROM AUTHOR]

This paper develops a robust generalized maximum-likelihood Koopman operator-based Kalman filter (GM-KKF) to estimate the rotor angle and speed of synchronous generators. The approach is data driven and model independent. Its design phase is carried out offline and requires estimates of the synchronous generators’ rotor angle and speed, along with active and reactive power at the generators’ terminal; in real-time operation, only measurements of the rotor speed, active, and reactive power are used. We first investigate the probability distribution of the transformed dynamic states by means of Q–Q plots and verify that the states of the GM-KKF approximately follow a Student's t-distribution with 20 degrees of freedom when the initial state vector is normally distributed. Under this assumption, our filter presents high statistical efficiency. Numerical simulations carried out on the IEEE 39-bus test system reveal that the GM-KKF has a faster convergence rate than the non-robust Koopman operator-based Kalman filter thanks to the adoption of a batch-mode regression formulation. They also show that the computing time of the GM-KKF is roughly reduced by one-third as compared to the one taken by our previously developed robust GM-extended Kalman filter. [ABSTRACT FROM AUTHOR]

This paper develops a generalized framework that allows us to investigate the vulnerability of the power system nonlinear state estimator to false data injection attacks (FDIAs) from the operator's perspective and to initiate some countermeasures. Unlike most existing FDIA methods, which assume a perfect knowledge of the system measurements and topology by a hacker, we derive and analyze the uncertainties for launching successful FDIAs along with their upper bounds. To effectively defend against an FDIA, we propose a robust detector that checks the measurement statistical consistency using a subset of secure PMU measurements. We first show that if these secure PMU measurements are free of bad data while making the system observable, the FDIA is detectable. We then show that detectability is also ensured if these conditions are relaxed while using alternative redundant measurements from short-term nodal synchrophasor predictions together with the robust Huber M-estimator. Numerical simulation results on the IEEE 30-bus and 118-bus systems demonstrate the effectiveness and robustness of the proposed method even the secure measurements contain noise and bad data. [ABSTRACT FROM AUTHOR]

The ability to detect defects on hardwood trees and logs holds great promise for the hardwood forest products industry. At every stage of wood processing, there is a potential for improving value and recovery with knowledge of the location, size, shape, and type of log defects. This paper deals with a new method that processes hardwood laser-scanned surface data for defect detection. The detection method is based on robust circle fitting applied to scanned cross-section data sets recorded along the log length. It can be observed that these data sets have missing data and include large outliers induced by loose bark that dangles from the log trunk. Because of that and because of the nonlinearity of the circle model, which presents both additive and nonadditive errors, we initiated a new robust Generalized M-estimator for which the residuals are standardized via scale estimates calculated by means of projection statistics and incorporated in the Huber objective function, yielding a bounded influence method. Our projection statistics are based on the 2-D radial vectors instead of the row vectors of the Jacobian matrix as advocated in the literature dealing with linear regression. These radial distances allow us to develop algorithms aimed at pin. pointing large surface rises and depressions from the contour image levels, and thereby, locating severe external defects having at least a height of 0.5 in and a diameter of 5 in. [ABSTRACT FROM AUTHOR]

This paper develops a robust power system state estimation framework that accounts for correlations and imperfect time synchronization of the measurements. In this framework, correlations of the measurements obtained from the supervisory control and data acquisition (SCADA) system and the phasor measurement units (PMUs) are separately calculated through the unscented transformation and a vector auto-regression (VAR) model. Specifically, the PMU measurements during the waiting period of two successive SCADA measurement scans are buffered via a VAR model whose parameters are robustly estimated using the projection statistics. The latter take into account their temporal and spatial correlations and provide the needed measurement redundancy to suppress bad data and mitigate imperfect time synchronization. In the case where the SCADA and the PMU measurements do not arrive simultaneously at the control center, yielding imperfect measurement time synchronization, either the forecasted PMU measurements or the prior SCADA measurements from the latest state estimation run are leveraged to restore system observability. Finally, a robust generalized maximum-likelihood (GM)-estimator is extended to integrate the measurement error correlations and to handle the outliers, also known as bad data. Simulation results that stem from a comprehensive comparison with other alternatives under various conditions demonstrate the benefits of the proposed framework. [ABSTRACT FROM AUTHOR]

This paper develops a robust iterated extended Kalman filter (EKF) based on the generalized maximum likelihood approach (termed GM-IEKF) for estimating power system state dynamics when subjected to disturbances. The proposed GM-IEKF dynamic state estimator is able to track system transients in a faster and more reliable way than the conventional EKF and the unscented Kalman filter (UKF) thanks to its batch-mode regression form and its robustness to innovation and observation outliers, even in position of leverage. Innovation outliers may be caused by impulsive noise in the dynamic state model while observation outliers may be due to large biases, cyber attacks, or temporary loss of communication links of PMUs. Good robustness and high statistical efficiency under Gaussian noise are achieved via the minimization of the Huber convex cost function of the standardized residuals. The latter is weighted via a function of robust distances of the two-time sequence of the predicted state and innovation vectors and calculated by means of the projection statistics. The state estimation error covariance matrix is derived using the total influence function, resulting in a robust state prediction in the next time step. Simulation results carried out on the IEEE 39-bus test system demonstrate the good performance of the GM-IEKF under Gaussian and non-Gaussian process and observation noise. [ABSTRACT FROM AUTHOR]

This paper summarizes the technical activities of the Task Force on Power System Dynamic State and Parameter Estimation. This Task Force was established by the IEEE Working Group on State Estimation Algorithms to investigate the added benefits of dynamic state and parameter estimation for the enhancement of the reliability, security, and resilience of electric power systems. The motivations and engineering values of dynamic state estimation (DSE) are discussed in detail. Then, a set of potential applications that will rely on DSE is presented and discussed. Furthermore, a unified framework is proposed to clarify the important concepts related to DSE, forecasting-aided state estimation, tracking state estimation, and static state estimation. An overview of the current progress in DSE and dynamic parameter estimation is provided. The paper also provides future research needs and directions for the power engineering community. [ABSTRACT FROM AUTHOR]