Search

To investigate the asymmetric failure mechanism and failure mode of layered rock tunnels, a novel mixed-mode power exponent cohesive zone model (M-PECZM) is proposed in this paper, which can capture the crack propagation process under single-mode loading, tension-shear loading, and compression-shear loading conditions. The parameters in the formula can be obtained from pure tensile and shear tests, and the introduction of the post-peak characteristic parameter α makes the M-PECZM suitable for post-peak softening curves of different kinds of rocks. The proposed M-PECZM is embedded in FDEM to carry out uniaxial compression, direct tension, and triaxial compression simulations. By comparison, the numerical and experimental results show a good agreement, which verifies the reliability and effectiveness of the M-PECZM. Besides, the FDEM is adopted to simulate the excavation of gently inclined layered surrounding rock tunnel, and the influence of shear stress field and buried depth on the EDZ evolution process and convergence displacement is studied. Highlights: A novel mixed-mode power exponent cohesive zone model (M-PECZM) for FDEM is proposed. The introduction of the post-peak characteristic parameter α makes the M-PECZM suitable for various rocks. Comparisons with experiments verify the accuracy and completeness of the M-PECZM. The influence of shear stress field and buried depth on the EDZ evolution process and convergence displacement is analyzed particularly. The asymmetrical deformation mechanisms of the tunnel resulted from the coupling action between the layered soft rock and tectonic shear stress. [ABSTRACT FROM AUTHOR]

To better understand the rock fragmentation mechanism and optimize cutter design and selection for rock excavation by TBM, a set of three-dimensional indentation tests was conducted with different rock and cutter types. Acoustic emission (AE) monitoring technique was employed to capture the information of the rock damage evolution real-timely. It is found that the penetration by using the constant cross section (CCS) cutter tends to induce inconspicuous rock chips formation before the sudden occurrence of the macrocrack, but that by using the V-type cutter tends to induce gradual rock fragmentation accompanied by the multiple local rock chips formation and the sawtooth force-penetration curve. Meanwhile, rock fragmentation models for CCS and V-type cutters were compared, and the spatio-temporal evolution of AE events was quantitatively analyzed to reflect the rock damage zone development process. Results indicate that the V-type cutter has greater penetration ability and the CCS cutter can cause larger unit damage zone radius. Microscopic observation by using the scanning electron microscope (SEM) reveals that the fracture mechanism for the crushed zone of rock is mainly shear type and that for the major crack is tensile type. It does not matter with rock types or cutter types. [ABSTRACT FROM AUTHOR]

The excavation in layered rocks is an issue for a number of geoengineering applications; these kinds of rocks all exhibit transverse isotropic features due to the process of metamorphic differentiation. This paper focuses on providing two methods, i.e., the 3D printing technology and the combined finite-discrete element method, to simulate the anisotropic characteristics of layered rocks. The results showed that both the 3D-printed samples and the FDEM numerical models are considered as a good match, and both revealed that as the inclined angle increased, the UCS of the sample first decreased and then increased, showing a U-shaped pattern. The results of this paper served as a reference to the promotion of the 3D printing technology and the combined finite-discrete element method in the geotechnical engineering field and laboratory test research. [ABSTRACT FROM AUTHOR]