Search

The in situ stress field in valley areas is an important factor to consider in the construction of hydropower projects in southwest China. Due to intense tectonic movement, the action of gravity, and rapid river erosion, the resulting stress has a complex distribution and a large magnitude. The availability of stress measurements is insufficient to provide adequate understanding of the regional stress state. In this research, inversion analysis for the in situ stress field of a valley in the upper reaches of the Lancang River is carried out by using stepwise regression analysis and the FLAC3D numerical simulation, and the temporal and spatial distribution characteristics of the in situ stress are obtained. Based on those results, the influence of stress unloading effects on slope stability is discussed. The results show that the formation of the modern in situ stress field is the comprehensive result of interactions among gravity, tectonic movement, and river erosion. The reliability of the inverse result can be increased by improving the mesh density of the calculated model and considering multistep river erosion. Under the influence of the unloading effects, tensile fractures were formed and the rock mass loosened near the slope surface. With the presence of bedding dipping into the slope, toppling failure was triggered by the unloading rebound that mainly occurred in the stress relaxation zone. [ABSTRACT FROM AUTHOR]

Toppling deformations generally develop in interbedded anti-inclined rock slopes in the upper reaches of the Yalong River in southwest China. With the characteristics of large scales, strong deformation degrees and complex deformation modes, toppling bodies may eventually lead to instability failure in the form of landslides, which seriously threaten the construction and operation of hydropower stations in the basin. Taking three typical examples of toppling failures for interbedded anti-inclined rock slopes in the basin, the sensitivity analysis of 19 impact factors affecting the toppling deformation of this type of slope is obtained via the Grey correlation method and UDEC. The results show that the geometric parameters represented by slope angles are the most sensitive to toppling deformation, the mechanical parameters of joints are more sensitive to toppling deformation than the physical and mechanical parameters of intact rocks, and the sensitivities of the parameters of sandstone and slate gradually converge in the deformation process. [ABSTRACT FROM AUTHOR]

Recent research has paid little attention to weakening of discontinuities with different joint wall material (DDJM) induced by wetting and drying cycles. Experimental investigations were conducted to examine the effects of wetting–drying cycles on weakening of three typical types of natural planar DDJM collected from a sliding-prone formation in the Three Gorges reservoir region of China. Deterioration of the corresponding four types of discontinuities with identical joint wall material (DIJM) were also been studied for comparison. The weakening laws of DDJM were revealed from macro- and microperspectives by testing on mineral compositions, microstructures and water absorption rate of joint walls as well as shear strength of discontinuities. The results indicate that the repeated wetting–drying cycles lead to obvious changes in microstructure and increases of macro water absorption rate for the studied joint walls with the changing degree closely related to their clay mineral contents; the peak shear strengths of DDJM gradually decreases with the wetting and drying cycles for a certain normal stress with the weakening rate between that of the DIJM with two joint wall materials of the DDJM, while closer to that of DIJM with the weak half materials of the DDJM; significant correlations have been found between the variation coefficient of rock microstructure of joint walls and the macrodeterioration coefficient of DDJM; the changing rates of multi-scale parameters before and after six wetting–drying cycles vary obviously, indicating the weakening is slowed down after six wetting–drying cycles for the studied discontinuities. Highlights: Effects of wetting-drying cycles on weakening discontinuities with different joint wall material were studied. Deterioration of the discontinuities with identical joint wall material were also been investigated for comparison. The weakening laws were revealed from macro and micro perspectives. Significant correlations have been found between the variation coefficient of microstructure of joint walls and the macro deterioration coefficient. The results could provide a basis to better understand the stability evolution of rock slopes with soft and hard rock interbedded. [ABSTRACT FROM AUTHOR]

Toppling is a widespread failure mode in natural and excavated anaclinal rock slopes and threatens the construction and operation of important infrastructure such as hydropower and transportation corridors in southwest China. Therefore, comprehending the mechanisms underlying toppling is essential for relevant landslide prediction and prevention. In this study, we developed a physical model of an anaclinal rock slope using the Linda landslide as a site case. Based on field monitoring using Gopro cameras, high-speed cameras, strain sensors, stress sensors, and acoustic emission systems, the evolution of the anaclinal rock slope model was analysed. The reliability of the physical model test was verified by comparing the deformation characteristics of the landslide site with those of the slope model. The monitoring results suggested that the slope deformation process could be divided into five stages: an initial interlayer dislocation stage, a deformation initiation stage, a crack generation and propagation stage, a crack penetration stage, and a failure stage. The rock mass could be categorised into four deformation zones: the fresh zone, weakly toppled zone, moderately toppled zone and highly toppled zone. Acoustic emission sensors deployed near the failure-prone region held the potential to serve as early warning indicators for landslides on anaclinal rock slopes. Valley incision played a significant role in the formation of sliding surfaces in anaclinal rock slopes. Furthermore, the model experiment observed multiple failure surfaces and the failure behaviour of the landslide rock mass, shedding light on their connection to the deformation process and the stress state in the model. The study revealed the deformation and failure mechanism of an anaclinal rock slope from many perspectives and deepened our understanding of toppling type of landslides. • Detailed study of Linda landslide's background and structure. • In-depth analysis of anaclinal rock slope using multi-field monitoring. • Summarized complex anaclinal rock slope failure mode and rock mass features. • Emphasized valley incision's role in forming sliding surfaces on anaclinal slopes. • Revealed the generation of multiple failure surfaces during toppling deformation. [ABSTRACT FROM AUTHOR]

Due to complex geological structures and strong crustal activity, geological disasters occur frequently in the upper reaches of the Yalong River, Southwest China. Toppling failure on anti-dip rock slopes is a common phenomenon; in particular, after the Wenchuan earthquake in 2008, numerous landslides caused by toppling deformation occurred in reservoir areas, seriously threatening the construction and operation of large-scale water conservancy projects and hydropower projects. Taking three typical toppling slopes in the basin as research objects, the dynamic behaviour, failure evolution, and failure plane location of toppling failure under seismic waves were investigated by shaking table tests and UDEC simulations. The test results indicated that slope angle and stratum dip angle were both inversely proportional to the stability of the slope in the tested ranges. The failure evolution of toppling on anti-dip rock slopes could be divided into four stages: (1) the development stage of tensile cracks in the strata; (2) the formative stage of tensile cracks at the crest of the slope; (3) the formative stage of toppling zones; and (4) the failure stage. Two equations were proposed to reveal the relationships between the surface peak ground acceleration and the horizontal depth of the failure plane and displacement of the slope surface. The propagation and coalescence of discontinuous cross joint in the slope and the entire failure evolution simulated by the UDEC damage model agreed well with the shaking table test results. [ABSTRACT FROM AUTHOR]

Complex block-flexure slope toppling is observed in interbedded sandstone and slate in the upper Yellow River, China. Block toppling is observed in the relatively hard sandstone and flexural toppling is observed in the relatively soft slate. The evolution of toppling slope deformation is characterized by long-term progress and spatial variability. In order to study these characteristics, field investigations, adit prospecting, borehole drilling, sonic tests and numerical simulation were carried out. In addition, the effect of the structure, the composite mode of the rock mass, the unloading fissures and geomorphology are discussed. Furthermore, we explored the toppling mechanisms and simulated it numerically; on this basis, the slope evolution is divided into four stages. Results obtained from the numerical simulation compared well with field investigation data (investigation data, rock sonic survey and strata dip statistics). Comparative studies have demonstrated that the analytical methods presented in this paper are appropriate for back analysis of the toppling evolution process. The result showed that this toppling slope has not yet entered the later progressivity failure stage and is currently limited to collapse at shallow levels, whereas the deep-seated rock mass will remain stable for a long time. This study might provide reference for a stability evaluation and hazard prevention analysis for rock toppling. [ABSTRACT FROM AUTHOR]