Search

This article presents the operation of onboard integrated battery chargers tied to a nine-phase EV-drive train, shedding light on the charging performance during the postfault operation, when one or more faulty inverter legs are disconnected. The objective in that case is to ensure balanced grid currents, while maintaining minimum machine losses at zero average torque production. The proposed concept requires a minimalistic change from a control structure perspective to switch between the pre- and postfault cases. Limitations and fault cases are discussed and corroborated with experimental tests on a 1.5-kW prototype.The derived concept is parameter independent and applicable to nine-phase drives, irrespective of the type of rotor used. [ABSTRACT FROM AUTHOR]

This paper presents the pre and postfault stator current control structures for symmetrical dual three-phase reluctance synchronous machines (SDT-RSMs) with different neutral-point configurations. The effect of winding chording and rotor saliency on the space harmonic mapping among different subspaces is investigated. This proves on one hand that the control structure in the prefault case can be simplified; on the other hand, it shows that the derived harmonic mapping in the literature is insufficient to ensure high-performance operation in the postfault operation. Moreover, the machine nonlinearities are identified, through which the maximum-torque-per-ampere loci are obtained and employed in the pre and postfault cases. The theoretical findings are corroborated with finite-element simulations and experimental validations on a 3-kW SDT-RSM prototype. [ABSTRACT FROM AUTHOR]

In electric drive applications that are based on high‐speed induction motors (IMs) with an extended speed range, stator winding pole‐changing is a possible technique to avoid oversizing the driving motor. The electronic pole changing employed in multiphase IMs has gained recent interest because it avoids physical winding reconfiguration. The effective number of poles of the air gap flux distribution can be electronically altered by simply changing the applied current sequence to a multiphase stator. The main problem associated with this technique is the significant increase in machine magnetising current with the increase in effective pole number when conventional multiphase distributed windings are employed. This study proposes a new fractional‐slot concentrated winding layout with a special stator connection suitable for pole‐amplitude modulated IMs that offers a 2:1 pole ratio while maintaining equal magnetising current for both winding pole pairs. Moreover, constant power operation can be achieved for a speed range of over 4 pu. The main concept is discussed and verified through simulations and experimentally. The machine mathematical model and the required vector space decomposition‐based controller are also presented. [ABSTRACT FROM AUTHOR]

The combined star/pentagon connection of five-phase induction machines was recently demonstrated as a promising compromise between conventional star and pentagon connections. It combines the advantages of both star and pentagon connections without any additional hardware for winding changeover. This connection is based on two five-phase single layer concentrated winding sets shifted in space by π/10 and connected in a combined star/pentagon configuration to provide five-phase terminals. Since the combined star/pentagon connected induction machine is fundamentally an asymmetrical ten-phase machine, the machine mathematical model possesses additional subspaces, which affect the behavior of the machine especially under open line conditions. Starting from the conventional five-phase and m -bar squirrel cage induction machine model, the phase-variable model of the combined star/pentagon connection is introduced in this paper. The corresponding equivalent dq model with five decoupled subspaces, which can account for air gap harmonics up to ninth order, is then derived. Finally, it was shown that the machine model could be simply approximated with only two subspaces similar to a conventional five-phase induction machine with sinusoidally distributed winding, where the flux produced by the nonfundamental subspace could be neglected. The model is verified using a 1 kW prototype five-phase induction machine. [ABSTRACT FROM PUBLISHER]

This paper presents the steady-state mathematical model of a five-phase induction machine with a combined star/pentagon connection. The connection splits the stator winding into two five-phase windings displaced in space by $\pi$/10 and connected in a combined star/pentagon configuration. Recent work limited to an experimental investigation demonstrated that the connection possesses improved fault tolerance when compared to a conventional star-connected stator, as well as avoids the pentagon connection problems. Although the machine has five-phase terminals, it is intrinsically an asymmetrical ten-phase machine, which introduces additional subspaces in the machine's mathematical model. In order to theoretically investigate and thoroughly assess this connection against conventional connections, this paper introduces the steady-state mathematical model based on vector space decomposition and symmetrical component theory. Finite-element analysis is first used to investigate the different harmonic current components induced in the cage rotor circuit, upon which the effect of different subspaces can be clarified and the required transformation matrix from phase variables to their sequence components can be derived. The model is verified using a 1-kW prototype five-phase induction machine. [ABSTRACT FROM PUBLISHER]

Despite the increased interest in multiphase induction machines for safety-critical applications, machine parameter identification for the different sequence planes is still a challenging research point. In most available literature, the effect of nonfundamental sequence planes is overlooked due to the assumption of sinusoidal winding distribution and healthy operation. However, in a single layer or concentric winding layout with an odd number of phases, the effect of flux produced by nonfundamental sequence planes cannot be ignored for the open-phase case. This paper proposes a simple offline method to estimate the parameters of a five-phase induction machine corresponding to different sequence planes. The proposed technique can estimate the stator leakage inductance as well as the magnetizing inductance of both fundamental and third sequences by applying a quasi-square voltage to the stator winding while the machine is running at no-load. Consequently, the rotor circuit parameters of the fundamental sequence plane can be simply obtained by deducting the stator impedance from the blocked rotor machine impedance. For the third sequence plane, an approximate relation to estimate these parameters based on the measured fundamental sequence rotor parameters is also given. An experimental 1.5 Hp prototype machine is used to verify the proposed technique. [ABSTRACT FROM PUBLISHER]

Although torque enhancement in multiphase induction machines using harmonic current injection has been addressed in the literature, a detailed assessment of the effect of this enhancement on the design parameters of multiphase machines with different numbers of phases is needed. This paper addresses this topic by performing a detailed comparative study of harmonic injection torque enhancement on multiphase machines with different numbers of phases. Sets of identical dimension and volume rotors differing in their value of the bar skew angle were designed to operate with the various stator designs in order to facilitate the comparative evaluation. A mathematical approach is also introduced to enable the derivation of equivalent multiphase machine parameters based on an existing one. In addition to a detailed finite-element-analysis verification of the results, time domain MATLAB simulations are used to verify the mathematical modeling. The results provide a means to assess the extent to which such harmonic injection may be beneficial by quantifying torque enhancement as well as torque density for various multiphase machines. [ABSTRACT FROM AUTHOR]

This paper presents an indirect vector control scheme with an improved flux pattern using third harmonic injection. The control objective is to independently control both flux and torque and to generate a nearly rectangular air-gap flux, resulting in improved machine power density. If there is a proportional relation between the third harmonic and fundamental plane currents, variable misalignment between fundamental and third air-gap flux components occurs with varying mechanical loading. Due to this misalignment, saturation may take place. Accordingly, the total flux is saturated and iron loss increases. Hence, coupling results between different sequence planes. Instead of a proportional relation between the current components, direct and quadrature current components of the injected third harmonic current reference are a function of the fundamental direct and quadrature reference current components, respectively. These functions ensure that the air-gap flux is near rectangular with a maximum value of 1 p.u. from no load to full load. Moreover, this controller guarantees complete decoupling between the sequence planes. An eleven-phase induction machine is used to validate the proposed controller experimentally, while supporting simulation results and theoretical analysis use both MATLAB and finite element platforms. [ABSTRACT FROM AUTHOR]

Fractional slot concentrated windings (FSCWs), or modular windings, have shown promise with permanent magnet machines. However, their inability to produce high quality travelling fields has limited their application from spreading to induction machines. This paper presents the design considerations and tradeoffs involved in applying FSCWs to five-phase induction machines using the conventional three-phase lap wound machine as a reference. Previous work has touched upon the application of modular windings to three-phase induction machines, concluding that a conventional distributed winding is superior in terms of torque production and rotor bar losses. In applications such as high frequency induction machines and manually wound electrical submersible pump motors, the proposed machine topology provides advantages that may warrant its application despite an apparent power density penalty. In this paper, a prototype five-phase modular winding induction machine designed to significantly reduce the effect of space harmonics is investigated through simulations and experimentally. [ABSTRACT FROM PUBLISHER]

The performance of fault-tolerant modular permanent magnet machines depends on the proper selection of the pole and slot numbers which result in negligible coupling between phases. The preferred slot and pole number combinations eliminate the effect of low-order harmonics in the stator magnetomotive force and thereby the vibration and stray loss are reduced. In this paper, three external rotor machines with identical machine dimensions are designed with different slots per phase per pole ratios. A simulation study is carried out using finite element analysis to compare the performance of the three machines in terms of machine torque density, ripple torque, core loss, and machine efficiency. A mathematical model based on the conventional-phase-model approach is also used for the comparative study. The simulation study is extended to depict machine performance under fault conditions. [ABSTRACT FROM AUTHOR]