Search

In this article, the design and characteristic research of the coaxial magnetic gear for the contra-rotating propeller in the premium yacht are presented. The scale-down model of 1/25 is reviewed as the research of the applicability of the coaxial magnetic gear. The space harmonic characteristics of the magnetic field in the coaxial magnetic gear with the low gear ratio from 1 to 2 are investigated, and the optimized models with the surface-mounted permanent magnet and quasi-Halbach array are obtained using the response surface method. In the several operating points of the diesel engine, the magnetic loss and the resultant thermal characteristics are analyzed and compared in each model. Finally, the desired coaxial magnetic for the contra-rotating propeller in the premium yacht is achieved. [ABSTRACT FROM AUTHOR]

Unlike the coaxial magnetic gear (CMG), the magnetic geared machine (MGM) has the ac armature winding on the inner part or the outer part. Besides, the PM excitation field of the CMG and the ac armature field of the MGM have different space harmonic components of magnetic field from one other. Hence, the flux modulation characteristics in the CMG and the MGM are different, and the resultant magnetic radial forces at the modulating pieces are also occurred differently from one another. Thus, in this paper, first, the flux modulation characteristics of the PM excitation field in the CMG and the ac armature field in the MGM are presented. Second, the characteristics of the magnetic radial forces at the modulating pieces are analyzed, and the causes of the radial force according to the space harmonic components of the magnetic field are compared in the CMG and the MGM. [ABSTRACT FROM AUTHOR]

This paper investigates the vibration and noise characteristics of the coaxial magnetic gear (CMG) by the electromagnetic forces. In the CMG, the vibration and noise can be generated by the exciting forces acting on three parts, namely, low-speed rotor, high-speed rotor, and modulating pieces, respectively. The electromagnetic forces acting on three parts of the CMG and their force frequencies are calculated by using the Maxwell stress tensor method. Also, the mode shapes of the CMG full model and their resonance frequencies are obtained by the modal analysis. Through the electromagnetic forces and the result of the modal analysis, the vibration calculation is performed by using the 3-D-finite element method. Then, the effect of displacement on noise is confirmed by comparing the vibration calculation data and experiment data. The result shows the most affected part among the three parts of the CMG due to the noise is the low-speed rotor. [ABSTRACT FROM AUTHOR]

This paper investigates the characteristics of the radial force density according to the shapes of the flux modulation poles (FMP) in a surface-mounted vernier machine (SPMVM). The air-gap flux density harmonics obtained from the finite-element analysis method are analyzed using the analytical equations derived from the magnetomotive force and the air-gap permeance distributions. Then, in order to find the radial force density harmonics that generate the exciting force on the stator, the spatial orders and the angular frequencies of the radial force density harmonics are calculated by using the Maxwell stress tensor method. The analysis results show that the permeance harmonics generate the radial force density harmonics, but the resulting harmonics of the radial force density are time-invariant in the spatial domain. Consequently, the variation of the FMP shape can improve the torque characteristics of the SPMVM without the increase of the exciting force on the stator core. [ABSTRACT FROM AUTHOR]

This paper presents an accurate initial pole position (IPP) estimation method for a surface mounted permanent magnet synchronous motor (PMSM) without the use of pole sensors. To estimate the IPP, the proposed method uses the concept of reference frame. In this method, three torque commands, separated by 45° electrically from each other, are applied to the PMSM. Using the reference torque commands, moving distances are measured and transformation matrix is applied to eliminate the load torque term. Finally, the IPP is determined using the secant method. The IPPs under no load and at specific loaded condition are measured. The result of the load condition is compared with the previously proposed two reference frame method. The proposed method gives better result under load condition, compared with the two reference frame method, which fails to give satisfactory result under load condition. [ABSTRACT FROM AUTHOR]