Search

The present study aims to investigate the moisture absorption of polypropylene (PP)/rubberwood flour (RWF) composites and its effects on dimensional stability. The compositions included different grades of plastic, and the amounts of wood flour, maleic anhydride-grafted polypropylene (MAPP), and ultraviolet (UV) stabilizer were varied. The composite materials were manufactured into panels by a twin-screw extruder. Long-term water absorption (WA), long-term thickness swelling (TS), and degradation of flexural properties of the composites were studied for a range of water immersion times. The WA and TS of the samples increased with RWF content and immersion time. Recycled PP gave higher WA and TS than virgin PP, for the composites with 45 wt% RWF. Increasing MAPP content from 3 to 5 wt% had no significant effect on WA and TS, whereas the addition of 1 wt% UV stabilizer increased them. A MAPP content of 3 wt% is recommended for moisture resistance, while the amount of UV stabilizer should be kept as low as possible. Flexural strength and modulus of composites also decreased with moisture uptake; however, <3% WA did not significantly affect the flexural strength. In contrast, the maximum strain of composites consistently increased with WA. [ABSTRACT FROM AUTHOR]

The mechanical properties of composites from recycled waste plastic and waste sawdust are of interest in trying to convert these waste streams to useful products. The development of these composites from natural fiber is therefore receiving widespread attention due to the growing environmental awareness. The effects of compositions were investigated including different grades of plastic (virgin and recycled) and amounts of wood flour, coupling agent, and ultraviolet (UV) stabilizer on mechanical and physical properties of polypropylene/rubberwood flour (RWF) composites. Virgin polypropylene gave better mechanical properties than recycled (recycled polypropylene (rPP)), both in composites and as unfilled plastic. RWF content exceeding 25 wt% enhanced the strength of RWF-reinforced rPP composites. The modulus and hardness of composites increased linearly with wood flour loadings. Maleic anhydride-grafted polypropylene (MAPP) as a coupling agent increased the strength, modulus, and hardness of the composites. However, addition of 1 wt% UV stabilizer degraded the mechanical properties. Therefore, 4 wt% MAPP content is recommended to achieve good mechanical properties of rPP/RWF composites, while the amount of UV stabilizer should be as small as possible to avoid its negative influence. [ABSTRACT FROM AUTHOR]

Composites of rubberwood flour (RWF) and recycled polypropylene (rPP) were produced into panel samples by using a twin-screw extruder. The effects on creep behavior of mixture fractions of rPP, RWF, maleic anhydride-grafted polypropylene (MAPP), and ultraviolet (UV) stabilizer were studied in a D-optimal mixture design. Creep was significantly affected by the composition. Increasing the fraction of RWF decreased creep, while MAPP and UV stabilizer increased it. The models fitted were used to optimize a desirability score that balanced multiple creep characteristics. The model-based optimal formulation 50.5 wt% rPP, 44.9 wt% RWF, 3.5 wt% MAPP, 0.1 wt% UV stabilizer, and 1.0 wt% lubricant was experimentally validated to have low creep closely matching the model predictions. [ABSTRACT FROM PUBLISHER]

D-optimal mixture experimental design was used to determine the optimal mixture of composites from rubberwood (Hevea brasiliensis) flour and recycled polypropylene and to systematically analyze the effects of composition, namely recycled polypropylene, rubberwood flour, maleic anhydride-grafted polypropylene, and ultraviolet stabilizer fractions. Panel samples were extruded, and their properties were characterized. The overall compositions significantly affected water absorption, thickness swelling, flexural strength and modulus, and maximum strain. Water absorption and thickness swelling increased with the fraction of rubberwood flour. At long immersion times, flexural strength and modulus decreased, but maximum strain increased with high fraction of rubberwood flour. The fraction of maleic anhydride-grafted polypropylene only slightly affected water absorption and flexural properties, while the ultraviolet stabilizer fraction had a clear negative effect increasing water absorption and decreasing flexural properties. The models fitted were used for optimization of a desirability score, substituting for the multiple objectives modeled. The optimal formulation found was 68.9 wt% recycled polypropylene, 25.0 wt% rubberwood flour, 5.0 wt% maleic anhydride-grafted polypropylene, 0.1 wt% ultraviolet stabilizer, and 1.0 wt% lubricant. This formulation of the composites can be used for most suitable applications based on the moisture resistance. [ABSTRACT FROM PUBLISHER]

Highlights: [•] Composites based virgin PP had smaller loss of MOR and MOE than based recycled PP. [•] Composites with 1wt% UV stabilizer had smaller loss of MOR and MOE than without. [•] Increase of rubberwood flour content in composites increased loss of MOR and MOE. [Copyright &y& Elsevier]