Search

At the Z Facility at Sandia National Laboratories, the magnetized liner inertial fusion (MagLIF) program aims to study the inertial confinement fusion in deuterium-filled gas cells by implementing a three-step process on the fuel: premagnetization, laser preheat, and Z-pinch compression. In the laser preheat stage, the Z-Beamlet laser focuses through a thin polyimide window to enter the gas cell and heat the fusion fuel. However, it is known that the presence of the few μm thick window reduces the amount of laser energy that enters the gas and causes window material to mix into the fuel. These effects are detrimental to achieving fusion; therefore, a windowless target is desired. The Lasergate concept is designed to accomplish this by "cutting" the window and allowing the interior gas pressure to push the window material out of the beam path just before the heating laser arrives. In this work, we present the proof-of-principle experiments to evaluate a laser-cutting approach to Lasergate and explore the subsequent window and gas dynamics. Further, an experimental comparison of gas preheat with and without Lasergate gives clear indications of an energy deposition advantage using the Lasergate concept, as well as other observed and hypothesized benefits. While Lasergate was conceived with MagLIF in mind, the method is applicable to any laser or diagnostic application requiring direct line of sight to the interior of gas cell targets. [ABSTRACT FROM AUTHOR]

Detailed radiation-hydrodynamics calculations indicate that the dual-63-MA Z-pinch high-yield (HY) 220-eV inertial confinement fusion concept [Phys. Plasmas 6, 2129 (1999)] may release 400 MJ of fusion yield, if pulse shaping, capsule preheat, and x-radiation drive uniformity can be acceptably controlled. Radiation symmetry is under detailed investigation in an advanced, 70-eV HY-scale scoping hohlraum [Phys. Rev. Lett. 88, 215004 (2002)] driven by the single 20-MA power feed of Sandia National Laboratories’ Z accelerator. The time-averaged polar radiation asymmetry, 〈ΔI〉/I, is inferred from direct distortion measurements of an imploding capsule’s limb-darkened (“backlit”) shell, via 6.7 keV point projection x-ray imaging. Thus far, 〈ΔI〉/I has been measured at the 3.0±1.4 (%) level, on the best shots, in hohlraums (cylindrical) with length/radius ratios L/R of 1.61 and 1.69, either side of a L/R=1.66 predicted optimum for a zeroed P[sub 2] Legendre mode. Simulations suggest that when scaled to 220 eV with zeroed odd Legendre modes, relevant to the best fraction of shots on a dual power-feed HY accelerator, the increased hohlraum wall albedo would reduce the field asymmetry to the 0.9% level; thus approaching the uniformity requirements of high-yield ignition. Future studies at L/R=1.66 will include refinements in experimental methods and image analysis techniques (denoising), and the measured symmetry is anticipated to improve further. © 2003 American Institute of Physics. [ABSTRACT FROM AUTHOR]