Search

Abstract Aqueous Zn-I flow batteries utilizing low-cost porous membranes are promising candidates for high-power-density large-scale energy storage. However, capacity loss and low Coulombic efficiency resulting from polyiodide cross-over hinder the grid-level battery performance. Here, we develop colloidal chemistry for iodine-starch catholytes, endowing enlarged-sized active materials by strong chemisorption-induced colloidal aggregation. The size-sieving effect effectively suppresses polyiodide cross-over, enabling the utilization of porous membranes with high ionic conductivity. The developed flow battery achieves a high-power density of 42 mW cm−2 at 37.5 mA cm−2 with a Coulombic efficiency of over 98% and prolonged cycling for 200 cycles at 32.4 Ah L−1 posolyte (50% state of charge), even at 50 °C. Furthermore, the scaled-up flow battery module integrating with photovoltaic packs demonstrates practical renewable energy storage capabilities. Cost analysis reveals a 14.3 times reduction in the installed cost due to the applicability of cheap porous membranes, indicating its potential competitiveness for grid energy storage.

Abstract The high redox potential of Zn0/2+ leads to low voltage of Zn batteries and therefore low energy density, plaguing deployment of Zn batteries in many energy-demanding applications. Though employing high-voltage cathode like spinel LiNi0.5Mn1.5O4 can increase the voltages of Zn batteries, Zn2+ ions will be immobilized in LiNi0.5Mn1.5O4 once intercalated, resulting in irreversibility. Here, we design a polymer hetero-electrolyte consisting of an anode layer with Zn2+ ions as charge carriers and a cathode layer that blocks the Zn2+ ion shuttle, which allows separated Zn and Li reversibility. As such, the Zn‖LNMO cell exhibits up to 2.4 V discharge voltage and 450 stable cycles with high reversible capacity, which are also attained in a scale-up pouch cell. The pouch cell shows a low self-discharge after resting for 28 days. The designed electrolyte paves the way to develop high-voltage Zn batteries based on reversible lithiated cathodes.

Abstract Most current research is devoted to electrochemical nitrate reduction reaction for ammonia synthesis under alkaline/neutral media while the investigation of nitrate reduction under acidic conditions is rarely reported. In this work, we demonstrate the potential of TiO2 nanosheet with intrinsically poor hydrogen-evolution activity for selective and rapid nitrate reduction to ammonia under acidic conditions. Hybridized with iron phthalocyanine, the resulting catalyst displays remarkably improved efficiency toward ammonia formation owing to the enhanced nitrate adsorption, suppressed hydrogen evolution and lowered energy barrier for the rate-determining step. Then, an alkaline-acid hybrid Zn-nitrate battery was developed with high open-circuit voltage of 1.99 V and power density of 91.4 mW cm–2. Further, the environmental sulfur recovery can be powered by above hybrid battery and the hydrazine-nitrate fuel cell can be developed for simultaneously hydrazine/nitrate conversion and electricity generation. This work demonstrates the attractive potential of acidic nitrate reduction for ammonia electrosynthesis and broadens the field of energy conversion.

Abstract Zn‐ion batteries are regarded as the most promising batteries for next‐generation, large‐scale energy storage because of their low cost, high safety, and eco‐friendly nature. The use of aqueous electrolytes results in poor reversibility and leads to many challenges related to the Zn anode. Electrolyte additives can effectively address many such challenges, including dendrite growth and corrosion. This review provides a comprehensive introduction to the major challenges in and current strategies used for Zn anode protection. In particular, an in‐depth and fundamental understanding is provided of the various functions of electrolyte additives, including electrostatic shielding, adsorption, in situ solid electrolyte interphase formation, enhancing water stability, and surface texture regulation. Potential future research directions for electrolyte additives used in aqueous Zn‐ion batteries are also discussed.

Cl-redox reactions cannot be fully exploited in batteries because of the Cl2 gas evolution. Here, reversible high-energy interhalogen reactions are demonstrated by using a iodine-based cathode in combination with a Zn anode and a Cl-containing aqueous electrolyte solution.

The performances of rechargeable batteries are detrimentally affected by low temperatures (e.g., < 0 °C). Here, the authors report a few-layer Bi2Se3 material capable of improving battery cycling performances when operational temperatures are shifted from +25 °C to −20 °C.

The interactions between water molecules, electrode materials and anions are essential yet challenging for aqueous dual ion batteries. Here, the authors demonstrate the voltage manipulation of dual ion batteries through matching intercalation energy and solvation energy of different anions.