Search

Three-dimensional Reynolds-averaged Navier--Stokes solutions are employed to investigate the discharge and total temperature increase characteristics of the stepped labyrinth seal with honeycomb land. First, the relations between the windage heating number and the circumferential Mach number at different Reynolds numbers for different honeycomb seals are calculated and compared with the experimental data. The obtained numerical results show that the present three-dimensional periodic model can properly predict the total temperature increase in honeycomb seals. Then, a range of pressure ratios, three inlet preswirl ratios, four sizes of honeycomb cell diameter, and nine sizes of cell depth are selected to investigate the influence of inlet preswirl ratios and honeycomb geometry sizes on the discharge and total temperature increase characteristics of the stepped labyrinth seal. It shows that the leakage rate increases with the increase in cell diameter, and the cell depth has a strong influence on the discharge behavior However, the influence of the inlet preswirl on the leakage rate is found to be little in the present study. For the total temperature increase characteristic, the inlet preswirl ratio and pressure ratio have more pronounced influence than those of cell depth and diameter Furthermore, the relations between the leakage rate and cell depth and diameter, as well as the relations between the windage heating power and cell depth and diameter, are not monotonic functions if the pressure ratio is kept constant. [DOI: 10.1115/1.4001296] Keywords: honeycomb seal leakage flow, windage heating, total temperature increase

Three-dimensional Reynolds-averaged Navier-Stokes (RANS) solutions from CFX were utilized to investigate the leakage flow characteristics in the labyrinth honeycomb seal of steam turbines. At first, the accuracy and reliability of the utilized RANS approach was demonstrated using the published experimental data of the honeycomb seal. It showed that the utilized numerical method has sufficient precision to predict the leakage performance in seals. Then a range of sealing clearances, cell diameters, cell depths, rotation speeds, and pressure ratios were investigated to determine how these factors affect the leakage flow rate of the labyrinth honeycomb seal. The computed leakage flow rate increased with increasing sealing clearance and pressure ratios. Furthermore, the results show that the studied labyrinth honeycomb seal has the optimum sealing performance in the case of honeycomb cell diameter equals labyrinth step width, and the ratio of the honeycomb cell depth to honeycomb cell diameter is 0.93 under the designed condition. The flow pattern of each case is also illustrated to describe the leakage flow characteristics in labyrinth honeycomb seals. [DOI: 10.1115/1.4000091] Keywords: labyrinth honeycomb seal, leakage flow, numerical simulation