Search

We performed waveform inversion of the P waveforms recorded by our BroadBand Ocean Bottom Seismometers (BBOBSs) deployed in the Northwestern Pacific. Consequently, the depth profile of the P velocity of the oceanic upper mantle, which has not been well resolved by previous surface wave or receiver function analyses, was revealed. We considered the azimuthal anisotropy in the lithosphere, which significantly improved the variance reduction from 34% to 44%. The resulting P model exhibited higher and lower velocities in the lithosphere and asthenosphere, respectively. The velocity contrast was found to be second/third of that observed in the previous S models; however the obtained model appeared to have some trade‐off with the VS structures in the vicinity of the source. We compared our P model with the previous S model obtained using our BBOBSs and obtained the VP/VS model. The resulting VP/VS model has two notable features. First, the lithosphere is characterized by a rapid increase in the VP/VS values with depth, which implies chemical stratification. Second, the VP/VS values in the vicinity of the lithosphere‐asthenosphere boundary (LAB) are larger than the synthetic values of any major upper mantle mineral predicted by considering the anharmonic effects, which suggests the effects of anelasticity or melt. Key Points: We inverted P waveforms recorded by our BBOBSs to obtain the depth profile of the P velocity beneath the older Pacific plateCombining our P model with a previous S model revealed two notable features in Vp/VS structuresThe obtained Vp/Vs model suggests chemical stratification in the lithosphere and the effects of anelasticity or melt at the LAB [ABSTRACT FROM AUTHOR]

Abstract: We report anomalous core phase PKPbc‐PKPdf differential travel times relative to 1‐D spherically symmetric model with a uniformly anisotropic inner core recorded by stations in Alaska for South Sandwich Islands (SSI) earthquakes. The data sample the inner core for the polar paths, as well as the lowermost mantle beneath Alaska. Our major observations are the following: (1) fractional travel time residuals of PKPbc‐PKPdf increase rapidly within 2 °, (2) a clear shift of the residual pattern could be seen for earthquakes with different locations, and (3) the residuals show systematic lateral variation: at the northern part, no rapid increase of residual can be seen. A structural boundary with a P wave velocity contrast of about 3% at the lowermost mantle beneath East Alaska is invoked to explain the observation, and the required strength of anisotropy in the quasi‐western hemisphere of the inner core might be reduced if those anomalous data are excluded from analysis. [ABSTRACT FROM AUTHOR]

Properties of a new parameter, ηκ, that is recently introduced by Kawakatsu et al. for transverse isotropy are examined. It is illustrated that the parameter nicely characterizes the incidence angle dependence of bodywave phase velocities for vertical transverse isotropy models that share the same P- and S-wave anisotropy. When existing models of upper-mantle radial anisotropy are compared in terms of this new parameter, PREM shows a distinct property. Within the anisotropic layer of PREM (a depth range of 24.4-220 km), ηκ < 1 in the upper half and ηκ > 1 in the lower half. If ηκ > 1, anisotropy cannot be attributed to a layering of homogeneous isotropic layers, and thus requires the presence of intrinsic anisotropy. [ABSTRACT FROM AUTHOR]

We constrain olivine fabrics in the oceanic lithosphere using active and passive seismic observations of Pn azimuthal anisotropy. We first analyze active‐source data derived from a broadband ocean bottom seismometer array that was deployed in the Northwestern Pacific. We infer the azimuthal dependence of the Pn velocity, including the 2ϕ and 4ϕ terms of the sinusoidal functions, where ϕ is the back azimuth. We observe a skewed azimuthal dependence of the Pn velocity, with a large peak‐to‐peak amplitude of about 12%. Similar features are observed using an independent data set of teleseismic Pn waves. We constrain the direction of the crystallographic axes of olivine to explain the observed azimuthal dependence and identify A‐type olivine with a slightly dipping a‐axis and slightly tilting b‐axis being compatible with our observations. In contrast, we find that D‐type olivine with any direction of crystallographic axes cannot explain our observations. Secondary deformation and recrystallization in the older Pacific may be responsible for this strong and complex seismic anisotropy in the study region. Plain Language Summary: Olivine is the most abundant mineral in the oceanic upper mantle and exhibits preferred crystallographic orientations when it experiences plastic strain‐induced deformation (Nicolas & Christensen, 1987, https://doi.org/10.1029/GD016p0111). Olivine in the oceanic lithosphere is considered to retain the orientations from its formation at the mid‐ocean ridge unless it experiences tectonic perturbations such as reheating by hotspot volcanisms. Seismic anisotropy observations in the oceanic lithosphere therefore provide clues to plate tectonics processes. In this study, we analyze two independent data sets (active‐ and passive‐source data) and reveal the detailed azimuthal dependence of the P velocity traversing the oceanic lithosphere in the northwestern Pacific. We find that the two data sets consistently show a strong and skewed anisotropic signal. We infer that secondary deformation and recrystallization in the Pacific Plate may be responsible for these observations. Key Points: Strong and skewed azimuthal dependence of Pn velocity is robustly observedCompatible direction of the crystallographic axes of olivine is constrainedSecondary deformation and recrystallization in the older Pacific is suggested [ABSTRACT FROM AUTHOR]

We analyze seismic records collected at the oldest (170–180 Ma) Pacific seafloor using broadband dispersion array analysis. Using ambient noise and teleseismic waveforms, we measure Rayleigh‐wave phase velocities in a period range of 5–200 s that are inverted for array‐average one‐dimensional isotropic and azimuthally anisotropic shear‐wave velocity depth profiles from the crust to a depth of 300 km. The high‐velocity Lid and the low‐velocity zone are well‐resolved with velocity difference of ∼4%, whose transition occurs at depths between 80 and 100 km. The profile is compared with that obtained at the 130‐ and 140‐Ma seafloor. Accounting for the cooling effect due to the plate age difference, the low‐velocity zone of the oldest Pacific seafloor is ∼1.3% slower (∼110°C warmer) than that beneath the 140‐Ma seafloor, suggesting the occurrence of some reheating process beneath the oldest lithosphere. The azimuthal anisotropy at shallow depths (<50 km) is significantly different between the western and eastern areas of the array where the peak‐to‐peak amplitudes are estimated to be ∼2.8% and ∼1.6%, respectively. The fast direction is nearly parallel to the past seafloor spreading direction (perpendicular to the magnetic lineation) in the west, while it largely deviates in the east. The observed difference in azimuthal anisotropy may represent complicated evolution dynamics of the infant Pacific plate that involved a ridge‐ridge‐ridge triple junction. Plain Language Summary: One of the classical enigmas of plate tectonics is the cause of seafloor flattening where the seafloor depth becomes nearly constant for old ages (>∼70 Ma) while a simple cooling model of plate evolution predicts the age dependence. To solve this enigma, it is essential to resolve the subsurface structure of the oceanic plate and the asthenosphere below. As a part of an international effort, Pacific Array, that aims to cover the Pacific seafloor by arrays of ocean bottom seismometers, a team of Japanese and Korean scientists deployed an array in the oldest (170–180 Ma) Pacific seafloor. We determine isotropic and anisotropic shear‐wave velocity structures as a first step toward resolving the enigma. The results indicate that the asthenosphere beneath the oldest Pacific lithosphere is significantly slower than the prediction of the simple cooling and that the occurrence of some reheating process may be needed. Furthermore, azimuthal anisotropy (the dependence of the wave velocity on the horizontal propagation direction) in the shallow lithosphere shows that the anisotropy patterns differ between the eastern and western areas of the array, and simulation results indicate that the evolution process of the infant Pacific plate is not merely a simple triangular plate spreading. Key Points: Broadband Rayleigh‐wave dispersion array analysis has been conducted in the oldest (∼170 Ma) Pacific seafloorThe low‐velocity zone is significantly slower to indicate the occurrence of some reheating process beneath the oldest Pacific lithosphereThe spatial variation of the shallow azimuthal anisotropy indicates a complicated evolution of the infant Pacific plate [ABSTRACT FROM AUTHOR]

Abstract: The Indochina block is located at the junction of four major plates. It has a close relationship with the uplift of Tibet plateau and the sea-floor spreading of the South China Sea in the geological evolution histories. We deployed a temporary broadband seismograph array in Vietnam from February 2000 to October 2005, and measured shear-wave splitting of core-refracted phases to investigate the upper mantle anisotropy beneath the Indochina block and adjacent regions. The observed delay times of up to 1.5s are large, indicating a mantle source for the anisotropy. Two distinct regimes of seismic anisotropy are revealed. The fast polarization directions in the northern Indochina block with a main trend of N100°E are almost consistent with the direction of both the surface displacement and the absolute plate motion. These observations suggest the anisotropy is possibly generated by the present-day asthenospheric flow caused by the India–Eurasia collision. The fast polarization directions in the southern Indochina block and the Hainan island are nearly N60°E. The anisotropy in this area may reflect a combination of the India–Eurasia collision and the past orogenies in the lithosphere, or an abrupt variation in the asthenospheric flow. [Copyright &y& Elsevier]

We measured shear wave splitting from SKS data recorded by the transcontinental NECESSArray in NE China to constrain lithosphere deformation and sublithospheric flows beneath the area. We selected several hundreds of high quality SKS/SKKS waveforms from 32 teleseismic earthquakes occurring between 09/01/2009 and 08/31/2011 recorded by 125 broadband stations. These stations cover a variety of tectonic terranes, including the Songliao basin, the Changbaishan mountain range and Zhangguancai range in the east, the Great Xing'an range in the west and the Yanshan orogenic belt in the southwest. We assumed each station is underlaid by a single anisotropic layer and employed a signal-to-noise ratio (SNR) weighted multi-event stacking method to estimate the two splitting parameters (the fast polarization direction φ , and delay time, δt ) that gives the best fit to all the SKS/SKKS waveforms recorded at each station. Overall, the measured fast polarization direction lies more or less along the NW–SE direction, which significantly differs from the absolute plate motion direction, but is roughly consistent with the regional extension direction. This suggests that lithosphere deformation is likely the general cause of the observed seismic anisotropy. The most complicated anisotropic structure is observed beneath the southern Great Xing'an range and southwest Songliao basin. The observed large variations in splitting parameters and the seismic tomographic images of the area are consistent with ongoing lithospheric delamination beneath this region. [ABSTRACT FROM AUTHOR]