Search

Pyrosequencing is a DNA sequencing technique based on sequencing-by-synthesis enabling rapid and real-time sequence determination. Although ample genomic research has been undertaken using pyrosequencing, the requirement of relatively high amount of DNA template and the difficulty in sequencing the homopolymeric regions limit its key advantages in the applications directing towards clinical research. In this study, we demonstrate that pyrosequencing on homopolymeric regions with 10 identical nucleotides can be successfully performed with optimal amount of DNA (0.3125-5 pmol) immobilized on conventional non-porous Sepharose beads. We also validate that by using porous silica beads, the sequencing signal increased 3.5-folds as compared to that produced from same amount of DNA immobilized on solid Sepharose beads. Our results strongly indicate that with optimized quantity of DNA and suitable solid support, the performance of pyrosequencing on homopolymeric regions and its detection limit has been significantly improved., (Copyright © 2010 Elsevier Inc. All rights reserved.)

T215 revertant mutations such as T215C/D/E/S that evolve from the nucleoside reverse transcriptase (RT) inhibitor mutations T215Y/F have been found in about 3% of human immunodeficiency virus type 1 (HIV-1) isolates from newly diagnosed HIV-1-infected persons. We used a newly developed sequencing method-ultradeep pyrosequencing (UDPS; 454 Life Sciences)--to determine the frequency with which T215Y/F or other RT inhibitor resistance mutations could be detected as minority variants in samples from untreated persons that contain T215 revertants ("revertant" samples) compared with samples from untreated persons that lack such revertants ("control" samples). Among the 22 revertant and 29 control samples, UDPS detected a mean of 3.8 and 4.8 additional RT amino acid mutations, respectively. In 6 of 22 (27%) revertant samples and in 4 of 29 control samples (14%; P = 0.4), UDPS detected one or more RT inhibitor resistance mutations. T215Y or T215F was not detected in any of the revertant or control samples; however, 4 of 22 revertant samples had one or more T215 revertants that were detected by UDPS but not by direct PCR sequencing. The failure to detect viruses with T215Y/F in the 22 revertant samples in this study may result from the overwhelming replacement of transmitted T215Y variants by the more fit T215 revertants or from the primary transmission of a T215 revertant in a subset of persons with T215 revertants.

Pyrosequencing is a DNA sequencing method based on the principle of sequencing-by-synthesis and pyrophosphate detection through a series of enzymatic reactions. This bioluminometric, real-time DNA sequencing technique offers unique applications that are cost-effective and user-friendly. In this study, we have combined a number of methods to develop an accurate, robust and cost efficient method to determine allele frequencies in large populations for association studies. The assay offers the advantage of minimal systemic sampling errors, uses a general biotin amplification approach, and replaces dTTP for dATP-apha-thio to avoid non-uniform higher peaks in order to increase accuracy. We demonstrate that this newly developed assay is a robust, cost-effective, accurate and reproducible approach for large-scale genotyping of DNA pools. We also discuss potential improvements of the software for more accurate allele frequency analysis.

The diversity of virus populations within single infected hosts presents a major difficulty for the natural immune response as well as for vaccine design and antiviral drug therapy. Recently developed pyrophosphate-based sequencing technologies (pyrosequencing) can be used for quantifying this diversity by ultra-deep sequencing of virus samples. We present computational methods for the analysis of such sequence data and apply these techniques to pyrosequencing data obtained from HIV populations within patients harboring drug-resistant virus strains. Our main result is the estimation of the population structure of the sample from the pyrosequencing reads. This inference is based on a statistical approach to error correction, followed by a combinatorial algorithm for constructing a minimal set of haplotypes that explain the data. Using this set of explaining haplotypes, we apply a statistical model to infer the frequencies of the haplotypes in the population via an expectation-maximization (EM) algorithm. We demonstrate that pyrosequencing reads allow for effective population reconstruction by extensive simulations and by comparison to 165 sequences obtained directly from clonal sequencing of four independent, diverse HIV populations. Thus, pyrosequencing can be used for cost-effective estimation of the structure of virus populations, promising new insights into viral evolutionary dynamics and disease control strategies.

Since the invention of pyrosequencing, more than 500 articles have been published describing different applications of this technology, most notably for DNA structure variation and microbial detection. Technological advances have been made to enhance the robustness and accuracy of this technique as well as to reduce the cost and increase the throughput. This review intends to cover recent advances in this technology and discuss its application for low and high-throughput DNA variation studies.

Multiplexed high-throughput pyrosequencing is currently limited in complexity (number of samples sequenced in parallel), and in capacity (number of sequences obtained per sample). Physical-space segregation of the sequencing platform into a fixed number of channels allows limited multiplexing, but obscures available sequencing space. To overcome these limitations, we have devised a novel barcoding approach to allow for pooling and sequencing of DNA from independent samples, and to facilitate subsequent segregation of sequencing capacity. Forty-eight forward-reverse barcode pairs are described: each forward and each reverse barcode unique with respect to at least 4 nt positions. With improved read lengths of pyrosequencers, combinations of forward and reverse barcodes may be used to sequence from as many as n(2) independent libraries for each set of 'n' forward and 'n' reverse barcodes, for each defined set of cloning-linkers. In two pilot series of barcoded sequencing using the GS20 Sequencer (454/Roche), we found that over 99.8% of obtained sequences could be assigned to 25 independent, uniquely barcoded libraries based on the presence of either a perfect forward or a perfect reverse barcode. The false-discovery rate, as measured by the percentage of sequences with unexpected perfect pairings of unmatched forward and reverse barcodes, was estimated to be <0.005%.

Pyrosequencing is a relatively recent method for sequencing short stretches of DNA. Because both Pyrosequencing and Sanger dideoxy sequencing were recently used to characterize and validate DNA molecular barcodes in a large yeast gene-deletion project, a meta-analysis of those data allow an excellent and timely opportunity for evaluating Pyrosequencing against the current gold standard, Sanger dideoxy sequencing. Starting with yeast genomic DNA, parallel PCR amplification methods were used to prepared 4747 short barcode-containing constructs from 6000 Saccharomyces cerevisiae gene-deletion strains. Pyrosequencing was optimized for average read lengths of 25-30 bases, which included in each case a 20-mer barcode sequence. Results were compared with sequence data obtained by the standard Sanger dideoxy chain termination method. In most cases, sequences obtained by Pyrosequencing and Sanger dideoxy sequencing were of comparable accuracy, and the overall rate of failure was similar. The DNA in the barcodes is derived from synthetic oligonucleotide sequences that were inserted into yeast-deletion-strain genomic DNA by homologous recombination and represents the most significant amount of DNA from a synthetic source that has been sequenced to date. Although more automation and quality control measures are needed, Pyrosequencing was shown to be a fast and convenient method for determining short stretches of DNA sequence.

Pyrosequencing technology is a rather novel DNA sequencing method based on the sequencing-by-synthesis principle. This bioluminometric, real-time DNA sequencing technique employs a cascade of four enzymatic reactions producing sequence peak signals. The method has been proven highly suitable for single nucleotide polymorphism analysis and sequencing of short stretches of DNA. Although the pyrosequencing procedure is relatively straightforward, users may face challenges due to varying parameters in PCR and sequencing primer design, sample preparation and nucleotide dispensation; such challenges are labor and cost intensive. In this study, these issues have been addressed to increase signal quality and assure sequence accuracy.

DNA sequencing is the gold standard method for accurate microbial and viral typing. However, DNA sequencing techniques have been facing limitations in typing of human papillomaviruses when the specimen harbors multiple genotypes and yields nonspecific amplification products, resulting in nonspecific and noninterpretable sequence data. To address these limitations we have developed a type-specific multiple sequencing primer DNA-sequencing method. This new strategy is suitable for sequencing and typing of samples harboring different genotypes (co-infections with multiple genotypes) and yielding nonspecific amplifications, thus eliminating the need for nested polymerase chain reaction (PCR), stringent PCR conditions, and cloning. The new approach has also proved useful for amplicons containing low PCR yield or subdominant types, avoiding reperforming of amplifications. We have applied the multiple sequencing primer method for genotyping of clinically relevant human papillomaviruses in a clinical test panel by using a combined pool of seven type-specific sequencing primers for HPV-6, -11, -16, -18, -31, -33, and -45. Furthermore, we introduced a sequence pattern recognition approach when there was a plurality of genotypes in the sample to facilitate typing of more than one target DNA in the sample. The multiple sequencing primer method has proved to be a multifaceted approach for typing of human papillomaviruses by DNA sequencing technologies.

Pyrosequencing is a DNA sequencing technique based on the bioluminometric detection of inorganic pyrophosphate, which is released when nucleotides are incorporated into a target DNA. Since the technique is based on an enzymatic cascade, the choice of enzymes is a critical factor for efficient performance of the sequencing reaction. In this study we have analyzed the performance of an alternative DNA polymerase, Sequenase, on the sequencing performance of the Pyrosequencing technology. Compared to the Klenow fragment of DNA polymerase I, Sequenase could read through homopolymeric regions with more than five T bases. In addition, Sequenase reduces remarkably interference from primer-dimers and loop structures that give rise to false sequence signals. By using Sequenase, synchronized extensions and longer reads can be obtained on challenging templates, thereby opening new avenues for applications of Pyrosequencing technology.

The Pyrosequencing technology is a newly developed DNA sequencing method that monitors DNA nucleotide incorporation in real-time. A set of coupled enzymatic reactions, together with bioluminescence, detects incorporated nucleotides in the form of light pulses, yielding a characteristic light profile. In this study, a biochemical model of the Pyrosequencing reaction system is suggested and implemented. The model is constructed utilizing an assumption of irreversible Michaelis-Menten rate equations and a constant incorporation efficiency. The kinetic parameters are studied and values are chosen to obtain as reliable simulation results as possible. The results presented here show strong resemblance with real experiments. The model is able to capture the dynamics of a single light pulse with great accuracy, as well as the overall characteristics of a whole pyrogram trade mark. The plus- and minus-shift effects observed in experiments are successfully reconstructed by two constant efficiency factors. Furthermore, pulse broadening can partly be explained by apyrase inhibition and successive dilution.

The Pyrosequencing technology was used for identification of different clinically relevant fungi. The tests were performed on amplicons derived from the 18S rRNA gene using polymerase chain reaction (PCR) universal primers for amplification. Sequencing was performed up to 40 bases in a variable region with a designed general sequencing primer and the Pyrosequence data were analyzed by BLAST sequence search in the GenBank database. DNA from a total of 21 fungal specimens consisting of nine strains of clinically relevant fungi and 12 clinical specimens from patients suffering from proven invasive fungal infections were PCR-amplified and analyzed by gel electrophoresis, PCR-enzyme-linked immunosorbent assay (ELISA) and the Pyrosequencing technology. All data obtained by the Pyrosequencing technology were in agreement with the results obtained by PCR-ELISA using species/genus-specific oligonucleotides and were as well in accordance with the culture results. The results demonstrate that the Pyrosequencing method is a reproducible and reliable technique for identification of fungal pathogens.

A new adenosine nucleotide analog suitable for the Pyrosequencing method is presented. The new analog, 7-deaza-2'-deoxyadenosine-5'-triphosphate (c7dATP), has virtually the same low substrate specificity for luciferase as the currently used analog, 2'-deoxyadenosine-5'-O-(1-thiotriphosphate) (dATPalphaS). The inhibitory effect dATPalphaS displays on the nucleotide degrading activity of apyrase was reduced significantly by substituting the c7dATP for the dATPalphaS. Both analogs show high stability after long time storage at + 8 degrees C. Furthermore, with the new nucleotide a read length of up to 100 bases was obtained for several templates from fungi, bacteria and viruses.

To date, the Pyrosequencing trade mark technology has been performed at 28 degrees C due to the low thermostability of the firefly luciferase. In this study, firefly luciferase was stabilized in the presence of glycine betaine, allowing DNA sequencing at 37 degrees C. By increasing the temperature to 37 degrees C, false signals due to primer-dimers and loop-structures were decreased significantly. In addition, a combination of (i) replacing the natural dGTP with 7'deaza-dGTP in the polymerase chain reaction (PCR), (ii) 1.6 M glycine betaine, and (iii) an increase of the temperature to 37 degrees C enabled us to sequence a DNA template with the initial sequence 3'-ATGGCCCGGGGGGGAGCTCCA em leader 5'. Furthermore, we describe a method to analyze if a primer forms a primer-dimer with extendable 3'-ends.

Pyrosequencing technology is a bioluminometric DNA sequencing method that employs a cascade of four enzymes to deliver sequence signals. To date this technology has been limited to the sequencing of short stretches of DNA. As an improvement to this technique, we have introduced a bacterial group-specific, multiple sequencing primer approach that circumvents sequencing of less informative semi-conservative regions of the 16S rRNA gene. This new approach is suitable for challenging templates, improving sequence data quality, avoiding sequencing of non-specific amplification products, lessening sequencing time, and moreover, this strategy should open the way for many new applications in the future. The group-specific, multiple sequencing primers can be applied in the Sanger dideoxy sequencing method as well. In addition, we have improved the chemistry of the Pyrosequencing system enabling sequencing of longer stretches of DNA, which allows numerous new applications.

A new method for simple and fast clone checking is described. We combined the Pyrosequencing technology with a preprogrammed nucleotide dispensation strategy for fast analysis of DNA constructs. To test this method, the N-terminus region of plasmids constructed for the production of recombinant apyrase was analyzed. Of the ten plasmids tested, seven constructs were correct, two constructs showed one base deletion, and one construct showed deletion of a 195 bp fragment. The preprogrammed nucleotide dispensation strategy allowed the identification of the sequence downstream of the deletions. Thus, this method determines both the location and nature of possible artifacts.

A multiple-primer DNA sequencing approach suitable for genotyping, detection and identification of microorganisms and viruses has been developed. In this new method two or more sequencing primers, combined in a pool, are added to a DNA sample of interest. The oligonucleotide that hybridizes to the DNA sample will function as a primer during the subsequent DNA sequencing procedure. This strategy is suited for selective detection and genotyping of relevant microorganisms and samples harboring different DNA targets such as multiple variant/infected samples as well as unspecific amplification products. This method is used here in a model system for detection and typing of high-risk oncogenic human papilloma viruses (HPVs) in samples containing multiple infections/variants or unspecific amplification products. Type-specific sequencing primers were designed for four of the most oncogenic (high-risk) HPV types (HPV-16, HPV-18, HPV-33, and HPV-45). The primers were combined and added to a sample containing a mixture of one high-risk (16, 18, 33, or 45) and one or two low-risk types. The DNA samples were sequenced by the Pyrosequencing technology and the Sanger dideoxy sequencing method. Correct genotyping was achieved in all tested combinations. This multiple-sequencing primer approach also improved the sequence data quality for samples containing unspecific amplification products. The new strategy is highly suitable for diagnostic typing of relevant species/genotypes of microorganisms.

Pyrosequencing, a nonelectrophoretic DNA sequencing method that uses a luciferase-based enzymatic system to monitor DNA synthesis in real time, has so far been limited to sequencing of short stretches of DNA. To increase the signal-to-noise ratio in pyrosequencing the natural dATP was replaced by dATPalphaS (M. Ronaghi et al., 1996, Anal. Biochem. 242, 84-89). The applied dATPalphaS was a mixture of two isomers (Sp and Rp). We show here that by the introduction of pure 2'-deoxyadenosine-5'-O'-(1-thiotriphosphate) Sp-isomer in pyrosequencing substantial longer reads could be obtained. The pure Sp-isomer allowed lower nucleotide concentration to be used and improved the possibility to read through poly(T) regions. In general, a doubling of the read length could be obtained by the use of pure Sp-isomer. Pyrosequencing data for 50 to 100 bases could be generated on different types of template. The longer read will enable numerous new applications, such as identification and typing of medically important microorganisms as well as resequencing of DNA fragments for mutation screening and clone checking.

Pyrosequencing is a nonelectrophoretic single-tube DNA sequencing method that takes advantage of cooperativity between four enzymes to monitor DNA synthesis. To investigate the feasibility of the recently developed technique for tag sequencing, 64 colonies of a selected cDNA library from human were sequenced by both pyrosequencing and Sanger DNA sequencing. To determine the needed length for finding a unique DNA sequence, 100 sequence tags from human were retrieved from the database and different lengths from each sequence were randomly analyzed. An homology search based on 20 and 30 nucleotides produced 97 and 98% unique hits, respectively. An homology search based on 100 nucleotides could identify all searched genes. Pyrosequencing was employed to produce sequence data for 30 nucleotides. A similar search using BLAST revealed 16 different genes. Forty-six percent of the sequences shared homology with one gene at different positions. Two of the 64 clones had unique sequences. The search results from pyrosequencing were in 100% agreement with conventional DNA sequencing methods. The possibility of using a fully automated pyrosequencer machine for future high-throughput tag sequencing is discussed., (Copyright 2001 Academic Press.)

The ability to sequence a large number of DNA samples rapidly and accurately for detection of all possible mutations is a critical goal for the future application of DNA sequencing in routine medical diagnostics. Pyrosequencing() is a non-electrophoretic real-time DNA sequencing method that uses the luciferase-luciferin light release as the detection signal for nucleotide incorporation into target DNA. For pyrosequencing of the human p53 gene, a nested multiplex PCR method for amplification of exons 5-8 was prepared. In order to investigate the use of pyrosequencing in mutation detection, DNA samples from skin-cancer patients were used. Two forms of nucleotide dispensation strategy were used, cyclic and programmed. Bi-directional pyrosequencing was performed and the overlapping sequence data produced were assembled to determine the sequence of the gene. Reliable sequencing data were obtained with both dispensation strategies, but some advantages were obtained using the programmed nucleotide dispensation approach, such as longer and faster reads, and fewer out-of-phase problems. The accuracy of pyrosequencing for detection of p53 mutations and allele distribution was demonstrated.

There is a growing demand for high-throughput methods for analysis of single-nucleotide polymorphic (SNP) positions. Here, we have evaluated a novel sequencing approach, pyrosequencing, for such purposes. Pyrosequencing is a sequencing-by-synthesis method in which a cascade of enzymatic reactions yields detectable light, which is proportional to incorporated nucleotides. One feature of typing SNPs with pyrosequencing is that each allelic variant will give a unique sequence compared to the two other variants. These variants can easily be distinguished by a pattern recognition software. The software displays the allelic alternatives and allows for direct comparison with the pyrosequencing raw data. For optimal determination of SNPs, various protocols of nucleotide dispensing order were investigated. Here, we demonstrate that typing of SNPs can efficiently be performed by pyrosequencing using an automated system for parallel analysis of 96 samples in approximately 5 min, suitable for large-scale screening and typing of SNPs.