Search

In recent years, rapid population growth and industrialization have increased the use of natural resources and the production of waste. To develop a circular economy, it is necessary to study and promote alternative long-term solutions for waste disposal, such as reuse and recovery. Wastewater treatment plants (WWTPs) can be an important part of circular sustainability if re-oriented to function as a water resource recovery facilities (WRRFs). In this context, biological sewage sludge (SS) can be treated in order to produce more stabilized residues: biosolids (BS). This paper aims to review the possible alternatives to reuse the BS in order to increase matter recovery. Around 250 papers, reviews, books and conference proceedings have been examined. Authors explored the application of BS on land, such as soil amendment/fertilizer both in agriculture and for interventions on abandoned mine sites, and on engineering fields, in partial or total substitution of virgin materials. The reuse of BS as adsorbent materials and as a source of phosphorus is also discussed. • Population perceives the reuse of biosolids as dangerous for human and environment. • In agricultural reuse of biosolids, heavy metals effects continue to be studied. • Feasibility of the utilization of biosolids for brick construction. • Conversion into adsorbent material and source of phosphorus is also presented. • Further investigation on emerging organic contaminants would be conducted. [ABSTRACT FROM AUTHOR]

In this work we have performed a feasibility study of two upgrading alternatives for sewage sludge stabilization aimed to the reduction of the produced sludge and to the improvement of its qualitative characteristics with respect to its final destination: agricultural use or incineration. The first upgrading (1) proposes the separated thickening: primary sludge is thickened by gravity while dynamic thickening is applied to secondary sludge. The second upgrading (2) introduces a post-aerobic digestion stage (after the anaerobic one), in addition to separate thickening. Technical-economic and environmental assessments have been performed in comparison to a conventional wastewater treatment plant, which operates with gravity thickening and anaerobic digestion of mixed sludge. In the post-aerobic stage, operated with intermittent aeration, additional volatile solids removal of 45% and nitrification and denitrification efficiencies of 97% and 70%, respectively, were achieved. Both upgrading alternatives gained a positive technical evaluation with the only exceptions of the item “ Thermal energy consumption ” in upgrading 1 for agricultural reuse, and, to a minor extent, the “ Energy available for external recovery ” for incineration in both upgrading options. Cost analysis showed that the two upgrading alternatives are generally cheaper than the conventional plant, even if the results are dependent on local conditions, which have to be considered. Results of the environmental assessment showed that the upgrades with incineration perform better than the reference for all impact categories except freshwater eutrophication, with upgrading 2 as the best option. For the agricultural use, different results were obtained for the different impact categories with critical aspects mainly related to phosphorus and ammonia emissions for upgrading 1. [ABSTRACT FROM AUTHOR]

Abstract: A key issue in biological Waste Water Treatment Plants (WWTPs) operation is represented by the sludge management. Mechanical dewatering is a crucial stage for sludge volume reduction; though, being a costly operation, its optimization is required. We developed an original experimental methodology to evaluate the technical (dewatering efficiency) and financial (total treatment costs) performance of dewatering devices, which might be used as a DSS (Decision Support System) for WWTP managers. This tool was then applied to two real case studies for comparing, respectively, three industrial size centrifuges, and two different operation modes of the same machine (fixed installation vs. outsourcing service). In both the cases, the best option was identified, based jointly on economic and (site-specific) technical evaluations. [Copyright &y& Elsevier]

This paper is aimed at evaluating, from a techno-economic and environmental point of view, the performance of an existing wastewater treatment plant in which the traditional biological section is upgraded with an innovative Sequencing Batch Biofilter Granular Reactor. Two scenarios were simulated in order to model and assess the performances of conventional (CAS, Conventional Activated Sludge) and innovative solutions, based on mass balances, techno-economic evaluation and environmental assessment. The results showed that converting the activated sludge process into an SBBGR allows to achieve a drastic reduction in sludge production (up to 75% as volatile suspended solids). Furthermore, the secondary sedimentation and sludge stabilization units can be dismissed, reducing the area requirement (up to 50%). The technical assessment is mainly positive, with the electric energy consumption being the only critical item. The higher energy demand of the upgraded plant (about 25% more than the conventional treatment) is mainly associated with the recycle flow in the SBBGR system. Although the economic sustainability of the upgraded plant depends on local conditions, it can be considered to be likely favourable: sludge disposal and materials & reagents costs, together with the investment for plant reconstruction are those items that should be carefully evaluated before upgrading the CAS plant with SBBGR technology. The environmental assessment shows also mostly positive results, although it points to the increased phosphorus concentration in the effluent as a potentially critical issue and it highlights the electricity use and the increased nitrous oxide generation as other matters that need to be carefully checked in real case application. [ABSTRACT FROM AUTHOR]

Nowadays, several technologies and management strategies are proposed for upgrading wastewater treatment plants (WWTPs) in order to improve sludge stabilization or minimize sludge production. In order to make sure that this leads to overall improvements, their techno-economic and environmental performance has to be carefully evaluated. In response to this, the techno-economic and environmental performance was assessed for a considered model reference WWTP upgraded with separate treatment and disposal for primary and secondary sludge to provide guidance to research, policy and investment efforts. This paper departs in an experimental campaign carried out within the EU project “ROUTES” and describes an assessment of an upgrade of a WWTP, involving wet oxidation of primary sludge and thermophilic anaerobic digestion (integrated with thermal hydrolysis pre-treatment) for secondary sludge. The reference plant and the upgrade implied different disposal routes for the resulting sludges: incineration for the stabilized sludge deriving from the reference WWTP; agricultural land application for the secondary stabilized sludge from the upgraded plant and landfilling for the solid residue deriving from the wet oxidation process (as non-hazardous waste). The mass balance carried out for both reference and upgraded WWTPs showed a reduction of total sludge production (up to 45%) for the upgraded WWTP. The additional energy demand of the upgraded solution (+22.4 Wh/(PE d), PE: population equivalent) was partially balanced by the electric energy produced by combined heat and power unit installed in the upgraded WWTP (−18.08 Wh/(PE d)). The integrated assessment showed that the upgraded solution, although resulting in an increase of WWTP technical complexity, may contribute to environmental and economic advantages. The paper provides guidance in terms of which aspects need a more thorough evaluation when this upgrade is considered in real cases. [ABSTRACT FROM AUTHOR]