Search

Background: Compared with the Latarjet procedure, the Bristow procedure has a lower screw-related complication rate but poor bone healing. A modified Inlay Bristow procedure has been reported to significantly improve the bone healing rate, but the biomechanical mechanism is unclear. The aim of this study was to evaluate the biomechanical stability of the bone graft between a modified Inlay Bristow procedure and the classic Bristow procedure., Methods: Sixteen left scapula models (Sawbones, Composite Scapula, and fourth generation) were randomly divided into 2 groups (8:8). The bone graft in the first group was fixed with a 3.5 mm screw using the Inlay structure. The bone graft in the second group was fixed with a 3.5 mm screw via the traditional method. The maximum cyclic displacement, ultimate failure load and stiffness were evaluated biomechanically. The failure type was recorded for each model., Results: Cyclic loading tests demonstrated that the maximum cyclic displacement of the Inlay procedure was significantly smaller (P = .001) than that of the classic procedure. The Inlay Bristow technique resulted in a significantly higher (P = .024) ultimate failure load than the classic Bristow technique. The stiffness of the classic group was 19.17 ± 4.01 N/mm and that of the inlay group was 22.34 ± 5.35 N/mm (P = .232). Failure was mainly due to bone graft fractures through the drill hole or glenoid bone fractures., Conclusion: Inlay Bristow fixation of the bone graft in a Sawbones model provides significantly stronger fixation and better time point zero stability than classic Bristow fixation, suggesting a higher likelihood of graft union., (Copyright © 2023 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.)

Background: Knowledge of acromioclavicular (AC) joint kinematics and distance may provide insight into the biomechanical function and development of new treatment methods. However, accurate data on in vivo AC kinematics and distance between the clavicle and acromion remain unknown., Purpose/hypothesis: The purpose of this study was to investigate 3-dimensional AC kinematics and distance during arm elevation in abduction, scaption, and forward flexion in a healthy population. It was hypothesized that AC kinematics and distance would vary with the elevation angle and plane of the arm., Study Design: Controlled laboratory study., Methods: A total of 19 shoulders of healthy participants were enrolled. AC kinematics and distance were investigated with a combined dual fluoroscopic imaging system and computed tomography. Rotation and translation of the AC joint were calculated. The AC distance was measured as the minimum distance between the medial border of the acromion and the articular surface of the distal clavicle (ASDC). The minimum distance point (MDP) ratio was defined as the length between the MDP and the posterior edge of the ASDC divided by the anterior-posterior length of the ASDC. AC kinematics and distance between different elevation planes and angles were compared., Results: Progressive internal rotation, upward rotation, and posterior tilt of the AC joint were observed in all elevation planes. The scapula rotated more upward relative to the clavicle in abduction than in scaption ( P = .002) and flexion ( P = .005). The arm elevation angle significantly affected translation of the AC joint. The acromion translated more laterally and more posteriorly in scaption than in abduction ( P < .001). The AC distance decreased from the initial position to 75° in all planes and was significantly greater in flexion ( P < .001). The MDP ratio significantly increased with the elevation angle ( P < .001)., Conclusion: Progressive rotation and significant translation of the AC joint were observed in different elevation planes. The AC distance decreased with the elevation angle from the initial position to 75°. The minimum distance between the ASDC and the medial border of the acromion moved anteriorly as the shoulder elevation angle increased., Clinical Relevance: These results could serve as benchmark data for future studies aiming to improve the surgical treatment of AC joint abnormalities to restore optimal function., Competing Interests: One or more of the authors has declared the following potential conflict of interest or source of funding: This study was sponsored by the National Natural Science Foundation of China (No.81171706). L.L.S. has received consulting fees from Medical Device Business Services and DePuy Synthes, speaker fees from Arthrex and Medwest Associates, and hospitality payments from Exactech and Arthrex. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto.

Purpose: To compare clinical and computed tomography outcomes between the arthroscopic Latarjet procedure and the arthroscopic Bristow procedure., Methods: Patients who underwent arthroscopic Latarjet or Bristow procedures with at least 2 years of follow-up were retrospectively reviewed. Thirty-eight shoulders were included in the Latarjet group, and 34 were included in the Bristow group. Recurrence of dislocation, clinical scores, rate of return to sports (RTS), and computed tomography assessment findings (position of transferred coracoid, graft healing, graft absorption, and glenohumeral degenerative osteoarthritis [OA]) were obtained at final follow-up., Results: No recurrent dislocation occurred in either group, and no significant differences in clinical scores were found between the 2 procedures, with a mean follow-up period of 3.4 years. The operative time in the Bristow group was significantly shorter than that in the Latarjet group (P < .001). The transferred coracoid had healed in 94.7% of the patients in the Latarjet group and 85.3% in the Bristow group at final follow-up (P = .01). No significant difference in graft absorption or the degree of glenohumeral OA was detected between the 2 groups. However, moderate to severe OA only occurred in the Latarjet group at final follow-up (4 of 38 shoulders, 10.5%). The postoperative external rotation angle and level of RTS favored the Latarjet procedure (P = .030 and P = .034, respectively)., Conclusions: Both the arthroscopic Latarjet and arthroscopic Bristow procedures led to good clinical scores with no new dislocation episodes. The Bristow group showed significantly less graft healing than the Latarjet group. However, the arthroscopic Bristow procedure took less operative time and showed a lower rate of early moderate to severe glenohumeral OA, better range of motion, and a higher rate of RTS., Level of Evidence: Level III, retrospective comparative therapeutic trial., (Copyright © 2023 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Purpose: This study aims to determine the rate of different levels of return to sports (RTS) in athletes undergoing the modified arthroscopic Bristow procedure and the factors associated with the level of RTS., Methods: The study was performed retrospectively on patients with traumatic anterior shoulder instability who underwent the modified arthroscopic Bristow procedure with a minimum follow-up of 2 years. The RTS rate, the level of return and the timing of return were assessed. Additionally, factors such as preoperative basic information, clinical outcomes, graft position, graft healing and graft absorption were analysed to investigate their correlation with the level of RTS. Multivariate regression models were used to evaluate the factors affecting the level of RTS., Results: In total, this study included 182 shoulders of 177 athletes undergoing the modified arthroscopic Bristow procedure. Of these patients, 142 (78.0%) shoulders of 137 athletes were enrolled, with a mean of 3.3-year follow-up. At the final follow-up, 134 (94.4%) shoulders were able to RTS, 123 (86.6%) shoulders were able to RTS to the pre-injury level, 52 (36.6%) shoulders could be completely "forgotten" without any psychological barrier during exercise. The multivariate logistic regression analysis identified the variable associated with RTS at the pre-injury level as previously failed arthroscopic Bankart repair (p < 0.001). As for the "forgetting" operated shoulder, the duration from first dislocation to surgery was a significant independent predictor (p = 0.034)., Conclusion: Although a large majority of athletes were able to RTS at the pre-injury level after the modified arthroscopic Bristow procedure, about two-thirds of the athletes felt difference in shoulders on both sides and could not completely "forget" the operated shoulder during exercise. Previously failed Bankart repair and the duration from first dislocation to surgery were the risk factors associated with the level of RTS after the modified arthroscopic Bristow procedure., Level of Evidence: IV., (© 2023. The Author(s) under exclusive licence to European Society of Sports Traumatology, Knee Surgery, Arthroscopy (ESSKA).)

Objective: To review the research progress of the biomechanical study of the Bristow-Latarjet procedure for anterior shoulder dislocation., Methods: The related biomechanical literature of Bristow-Latarjet procedure for anterior shoulder dislocation was extensively reviewed and summarized., Results: The current literature suggests that when performing Bristow-Latarjet procedure, care should be taken to fix the bone block edge flush with the glenoid in the sagittal plane in the direction where the rupture of the joint capsule occurs. If traditional screw fixation is used, a double-cortical screw fixation should be applied, while details such as screw material have less influence on the biomechanical characteristics. Cortical button fixation is slightly inferior to screws in terms of biomechanical performance. The most frequent site of postoperative bone resorption is the proximal-medial part of the bone block, and the cause of bone resorption at this site may be related to the stress shielding caused by the screw., Conclusion: There is no detailed standardized guidance for bone block fixation. The optimal clinical treatment plan for different degrees of injury, the factors influencing postoperative bone healing and remodeling, and the postoperative osteoarticular surface pressure still need to be further clarified by high-quality biomechanical studies.

Purpose: To investigate the clinical outcomes and radiologic evaluation of an all-arthroscopic Latarjet procedure with modified button fixation., Methods: Patients who received all-arthroscopic Latarjet procedure with modified suture button fixation between September 2015 to September 2016 were retrospectively reviewed. Indications for surgery were recurrent anterior shoulder dislocation with any 1 of these 3 conditions: glenoid defect >15%, contact-sport athlete, or failure after Bankart repair. Inclusion criteria included cases who received this surgery. Clinical outcomes were evaluated by University of California Los Angeles, ASES and Rowe score with a minimal follow-up of 3 years. Radiologic assessment on 3D computed tomography scan was performed preoperatively and postoperatively at different time points. Complications were also recorded., Results: A total of 30 patients were eventually included in this study. The mean follow-up time was 38.0 ± 2.5 months. There were 25 patients who performed contact sports. Of them, 10 patients were without glenoid defect >15% or failed Bankart repair. The remaining 20 patients had glenoid defect >15%, including 2 failed Bankart cases. Ten patients had glenoid defect < 13.5%, and the rest 20 patients had > 13.5%. UCLA, American Shoulder and Elbow Surgeons, and Rowe score significantly improved during follow-up, and the improvement exceeded MCID for all patients. No severe complications were noted. In total, 86.7% of the graft positioning was measured as flush and 13.3% as medial. The bone union rate was 96.7% at 3 months postoperatively and at final follow-up. The remodeling process for the restoration of the normal anatomy of the lower part of glenoid was noted., Conclusions: All-arthroscopic Latarjet with modified suture button fixation can achieve stable fixation of the coracoid, good clinical outcomes (all patients with improvement exceeding MCID), low complications rate. Furthermore, the bone remodeling process contributes to the recovery of the normal anatomy of anteroinferior glenoid., Study Design: Case series; Level of evidence, 4., (Copyright © 2022 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.)

Background: The prevalence of nonunion after the Latarjet procedure remains high. The purpose of the present study was to investigate healing and clinical outcomes after a novel arthroscopic coracoid process transfer procedure., Methods: Sixty-three patients who underwent the arthroscopic inlay Bristow procedure combined with Bankart repair were identified, and 51 patients who met the inclusion criteria were enrolled in this study. The key feature of this technique was that the coracoid process was trimmed and fixed into a trough (5 to 10 mm deep) in the glenoid neck with a metal screw. Bone graft union and positioning accuracy were assessed with use of postoperative computed tomography (CT) imaging. Clinical examinations, return to sport, and functional scores (American Shoulder and Elbow Surgeons [ASES] and Rowe scores) were recorded., Results: The mean duration of follow-up (and standard deviation) was 41.5 ± 7.7 months (range, 36 to 48 months). Postoperative CT scans showed that the position of coracoid graft was at 4:10 (from 3:50 to 5:00) (referencing the right shoulder) in the sagittal view. The α angle was 16.4° ± 9.5°, with 4 (7.8%) of 51 screws being over-angulated (α > 25°). On the axial view, the graft position was considered to be flush in 33 patients (64.7%), medial in 11 (21.6%), congruent in 7 (13.7%), and lateral or too medial in none. At 1 year, the coracoid graft had healed in 49 patients (96.1%) and had failed to unite in 2 patients. CT scanning, performed for 47 patients, showed grade-0 osteolysis in 9 patients, grade-1 osteolysis in 21 patients, and grade-2 osteolysis in 17 patients. At the time of the latest follow-up, there was a significant increase in the Rowe score (from 35.5 ± 8.3 to 95.7 ± 7.2) and the ASES score (from 71.2 ± 9.7 to 91.5 ± 4.4), and 87.0% of patients were able to return to sport. No arthropathy was observed in any patient., Conclusions: After a minimum 3-year follow-up, the arthroscopic inlay Bristow procedure resulted in a high rate of graft healing, excellent clinical outcomes, and a high rate of return to sports., Level of Evidence: Therapeutic Level IV. See Instructions for Authors for a complete description of levels of evidence., Competing Interests: Disclosure: This study was supported by the National Key Research and Development Program of China (2018YFF0301100). The funding source did not play a role in the investigation. The Disclosure of Potential Conflicts of Interest forms are provided with the online version of the article (http://links.lww.com/JBJS/G242)., (Copyright © 2020 by The Journal of Bone and Joint Surgery, Incorporated.)

Background: Coracoid graft positioning, fixation, and bone union are key factors affecting the clinical outcomes of Bristow and Latarjet procedures. We developed an arthroscopic "inlay" Bristow procedure based on the "mortise-tenon" joint structure concept using suture button fixation to achieve more stable fixation and better bone union of the graft., Purpose: To evaluate the positioning of the coracoid graft, bone union rate, and clinical outcomes of this arthroscopic inlay Bristow procedure with suture button fixation., Study Design: Case series; Level of evidence, 4., Methods: A total of 62 patients who received the arthroscopic inlay Bristow procedure with suture button fixation between June 2015 to June 2016 were eligible for inclusion, and 56 patients who met the inclusion criteria were enrolled in this study. Radiological assessment on 3-dimensional computed tomography scan was performed preoperatively, immediately after the operation, and postoperatively at 3 months, 6 months, 1 year, and the final follow-up. Pre- and postoperative clinical results were also assessed., Results: A total of 56 patients were included in this study. The mean ± SD follow-up time was 36.1 ± 3.7 months. Coracoid grafts (middle point) were positioned at 4 o'clock (range, 123.8°± 12.3°) in the sagittal view. In the axial view, 94.6% (53/56) of the graft positioning was measured as flush and 5.4% (3/56) as medial. Neither lateral nor too medial positioning was noted. The bone union rate was 96.4% at final follow-up. The mean visual analog scale score for pain during motion, American Shoulder and Elbow Surgeons score, and Rowe score all improved significantly after surgery-from 4.8 ± 2.6 to 1.1 ± 1.0, 69.2 ± 12.5 to 92.5 ± 7.0, and 33.5 ± 12.1 to 96.0 ± 4.9 at last follow-up, respectively. Almost all patients (98%; 55/56) returned to sports within 1 year after surgery at the same or higher level as compared with their preinjury performance. The mean subjective value for sports participation was 90.3% ± 7.1% (range, 70%-100%) as compared with the normal shoulder. The overall complication rate was 3.6%. No degenerative changes were noted in any patients., Conclusion: This study reported the first series of an inlay Bristow procedure with suture button fixation for recurrent shoulder dislocation, providing a satisfactory union rate and excellent graft positioning with a low complication rate. The mortise-tenon joint structure can provide excellent graft fixation and healing, while using suture button fixation instead of screw fixation could reduce osteolysis and complications related to hardware implantation.

Purpose: A new clinical test for evaluating subscapularis (SSC) integrity was described, and its diagnostic value was compared with the present SSC tests (the lift-off, belly-press, IRLS and bear-hug tests). The new test is called internal rotation resistance test at abduction and external rotation (IRRT). The test is performed at maximal 90° of abduction and maximal external rotation., Methods: Two hundred and thirty-five consecutive patients suffering from rotator cuff injury were evaluated preoperatively. Six tests were performed to assess the function of the SSC: the lift-off, belly-press, IRLS, the bear-hug, IRRT at 0° abduction and 0° external rotation (IRRT0°) and IRRT at maximal 90° abduction and maximal external rotation (IRRTM). Arthroscopic findings were the reference for diagnosing of SSC lesions., Results: The IRRTM test showed the greatest sensitivity (76.5 %), and IRLS (31.6 %) test had the lowest sensitivity. The IRRTM had the highest accuracy (79.0 %), and lift-off had the lowest accuracy (65.3 %). Positive IRRTM, bear-hug, belly-press, IRRT0° tests indicate that about one-third of the SSC is torn, and a positive lift-off and IRLS tests predict a severe tear at least two-thirds of the SSC., Conclusions: The IRRTM represents a sensitive diagnostic test for SSC lesions and improves the chance of finding the upper part of the SSC tears. When the IRRTM is positive, the surgeon should pay particular attention to detecting the SSC tendon during arthroscopy., Level of Evidence: Diagnostic study, Level I.

Background: Rotator cuff tears are a common shoulder injury that significantly impacts patients' daily lives and work abilities. Although surgical treatment methods for rotator cuff tears have been continuously improved with advances in medical technology, postoperative rehabilitation remains challenging. Therefore, finding effective rehabilitation treatments is crucial for improving patient prognosis and enhancing quality of life. This study will aim to systematically evaluate the impact of low-intensity pulsed ultrasound (LIPUS) on postoperative rehabilitation of rotator cuff tears, comprehensively assessing the efficacy and safety of LIPUS in postoperative recovery. Methods: This protocol will search multiple databases including PubMed/MEDLINE, Embase, Cochrane Library, CNKI, Scopus, and Web of Science to identify randomized controlled trials related to LIPUS for postoperative rehabilitation of rotator cuff tears. The search will encompass literature published from the inception of the databases up to April 2024. Methodological quality assessment and data extraction will be conducted using the Cochrane Handbook for Systematic Reviews of Interventions and PRISMA guidelines. Meta-analysis will be performed on appropriate studies using either random-effects or fixed-effects models, and subgroup analyses will be conducted to explore potential heterogeneity. Studies meeting the inclusion criteria will be included in the analysis. All analyses will be performed using Stata version 16.0. Results: The incidence of rotator cuff tear rates will be assessed by imaging techniques such as MRI or ultrasound. Pain intensity will be scored using standardized pain assessment scales, such as the Visual Analog Scale (VAS). Improved range of motion (ROM) in shoulder flexion, abduction, and rotation. Functional outcomes will be evaluated using effective measures such as Constant-Murley scores (CMS) and shoulder joint scores by American Shoulder and Elbow Surgeons (ASES). Adverse events associated with LIPUS therapy, including skin irritation, increased pain, or any other complications. Subgroup analysis will also be carried out if possible. Discussion and conclusion: Following the meta-analysis, we will assess the overall effect of LIPUS on postoperative rehabilitation of rotator cuff tears, and further explore its impact on aspects such as pain relief, functional improvement, and postoperative complications. It is anticipated that this study will provide comprehensive evidence regarding the role of LIPUS in postoperative rehabilitation of rotator cuff tears, guiding clinical practice and future research. The resultant manuscript will be submitted for publication in a peer-reviewed journal. Protocol registration number: CRD42024530798. [ABSTRACT FROM AUTHOR]

Background: The rate of nonunion observed among the variety of Bristow-Latarjet procedures reportedly ranges from 9.4% to 28%1. In Chinese timber buildings, the mortise-tenon joint is commonly utilized to connect beams to columns. Drawing inspirations from this concept, we created a bone trough in the glenoid neck to serve as a mortise and trimmed the coracoid graft to serve as a tenon, then fixed this mortise-tenon joint with a metal screw. Compared with a standard Bristow-Latarjet procedure, the key feature of this technique was that the coracoid process was placed into a trough (5 to 10 mm deep) in the glenoid neck, which substantially increased the bone contact area between the graft and glenoid neck. We called this surgical technique the Chinese unique inlay Bristow (Cuistow). Description: Specific instruments have been designed to improve the safety and accuracy of the arthroscopic inlay Bristow procedure (Weigao, Shangdong, China). The posterior portal (A), superolateral portal (B), and 3 anterior portals (i.e., proximal [C], inferolateral [D], and inferomedial [E]) were utilized. General anesthesia and an interscalene block were administered with the patient in the beach-chair position. The surgical technique can be divided into 6 steps: (1) evaluation of the shoulder joint; (2) coracoid preparation, drilling, and osteotomy; (3) subscapularis splitting and labrum detachment; (4) glenoid preparation and drilling; (5) coracoid retrieval, trimming, transfer, and fixation; and (6) Bankart repair. Alternatives: Soft-tissue capsulolabral repairs or bone reconstruction procedures are commonly performed for the treatment of anterior glenohumeral instability2. The arthroscopic Bristow-Latarjet procedure is increasingly popular for the treatment of anterior shoulder instability with a substantial osseous defect of the glenoid3. Defects that are too large to be restored with the coracoid process can be treated with use of the Eden-Hybbinette procedure or a distal tibial allograft4,5. Rationale: This procedure was inspired by the structure of mortise-tenon joints, resulting in a modified version of the Bristow-Latarjet technique in which the coracoid process is trimmed and placed into a trough (5 to 10 mm deep) in the glenoid neck. This procedure substantially increases the contact area between the fresh bone surface and the coracoid and glenoid neck. Another important advantage of this technique is that it can facilitate accurate positioning of the coracoid on the glenoid. This procedure resulted in a high rate of graft healing, excellent functional outcomes (Rowe and American Shoulder and Elbow Surgeons Shoulder scores), and a high rate of return to sport6. Currently, indications of this procedure are (1) participation in high-demand sports (i.e., collision and overhead) combined with the presence of a glenoid defect involving <25% of the glenoid, or (2) any glenoid defect involving 10% to 25% of the glenoid. Expected Outcomes: Increased bone-contact area and accurate positioning of the graft helped to facilitate osseous union, with a union rate of 96.1% at 12 months postoperatively. The clinical outcomes were excellent, with a high rate of return to sport (87%) at a minimum of 3 years of follow-up6. Important Tips: When the coracoid is retrieved through portal D (the inferolateral portal), there is a risk of stretching the musculocutaneous nerve. Trimming the coracoid graft could lead to stretching of the graft and the surrounding soft tissue, resulting in overstretching of the musculocutaneous nerve. To minimize the risk of musculocutaneous nerve injury, (1) the graft should be gently retrieved through portal D, (2) the graft should be trimmed with caution without overstretching it and surrounding soft tissue, and (3) a cannula should be utilized when driving the screw to fix the graft in order to avoid the surrounding soft tissue. Acronyms & Abbreviations: RHD = right-hand dominant MRA = magnetic resonance angiography 3D-CT = 3-dimensional computed tomography PDS = polydioxanone suture MCN = musculocutaneous nerve [ABSTRACT FROM AUTHOR]