Search

Magnetic domain motion has been widely studied in the fields of spintronics, nanowires, and thin films. However, there is a lack of such studies on industrial steels, especially for domain motion under the action of varying stress. Understanding domain motion under stress is helpful for the improvement of evaluation accuracy and the establishment of theoretical models of passive, nondestructive testing technology. This paper presents the influence of varying tensile stresses on the magnetic domain motion of silicon steel sheets. Magnetic domain rotation and domain wall displacement were characterized using magnetic domain images, and their motion mechanisms under elastic and plastic stresses are presented. The results show that the domain rotation under stress involves reversible and irreversible changes. The effect of material rearrangement on domain rotation and domain wall displacement after plastic deformation is discussed. Based on the motion mechanism, a threshold stress value (TSV) required for the complete disappearance of the supplementary domains in the elastic range is proposed, enabling the classification of the elastic stress ranges in which the reversible and irreversible domain rotations occur. In addition, the effect of microstructure on TSV is also discussed, and the results show that the regions far away from the grain boundary need larger stresses to complete an irreversible domain rotation. Additionally, the domain width and orientation also affect the TSV. These findings regarding the domain motion mechanism and TSV can help to explain the sequence of domain rotation under stress and modify the stress assessment under dynamic loads in electromagnetic nondestructive evaluation, especially in the magnetic memory method. [ABSTRACT FROM AUTHOR]

Deep insights into microstructures and domain wall behaviors in the evaluation of different material statuses under elastic and plastic stress ranges have essential implications for magnetic sensing and nondestructive testing and evaluation (NDT&E). This paper investigates the repeatability and stability of residual magnetic field (RMF) signals using a magneto-optical Kerr effect microscope for the stress characterization of silicon steel sheets beyond their elastic limit. Real-time domain motion is used for RMF characterization, while both the repeatability under plastic ranges after the cyclic stress rounds and stability during relaxation time are studied in detail. The distinction between elastic and plastic materials is discussed in terms of their spatio-temporal properties for further residual stress measurement since both ranges are mixed. During the relaxation time, the RMF of the plastic material shows a two-stage change with apparent recovery, which is contrasted with the one-stage change in the elastic material. Results show that the grain boundary affects the temporal recovery of the RMF. These findings concerning the spatio-temporal properties of different RMFs in plastic and elastic materials can be applied to the design and development of magnetic NDT&E for (residual) stress measurement and material status estimation. [ABSTRACT FROM AUTHOR]

Stress affects the microstructure of the material to influence the durability and service life of the components. However, the previous work of stress measurement lacks quantification of the different variations in time and spatial features of micromagnetic properties affected by stress in elastic and plastic ranges, as well as the evolution of microstructure. In this paper, microstructure evolution under stress in elastic and plastic ranges is evaluated by magnetic Barkhausen noise (MBN) transient analysis. Based on a J-A model, the duration and the intensity are the eigenvalues for MBN transient analysis to quantify transient size and number of Barkhausen events under stress. With the observation of domain wall (DW) distribution and microstructure, the correlation between material microstructure and MBN transient eigenvalues is investigated to verify the ability of material status evaluation on the microscopic scale of the method. The results show that the duration and the intensity have different change trends in elastic and plastic ranges. The eigenvalue fusion of the duration and intensity distinguishes the change in microstructure under the stress in elastic and plastic deformation. The appearance of grain boundary (GB) migration and dislocation under the stress in the plastic range makes the duration and the intensity higher on the GB than those inside the grain. Besides, the reproducibility of the proposed method is investigated by evaluating microstructure evolution for silicon steel sheet and Q235 steel sheet. The proposed method investigates the correlation between the microstructure and transient micromagnetic properties, which has the potential for stress evaluation in elastic and plastic ranges for industrial materials. [ABSTRACT FROM AUTHOR]

Stress is the crucial factor of ferromagnetic material failure origin. However, the nondestructive test methods to analyze the ferromagnetic material properties' inhomogeneity on the microscopic scale with stress have not been obtained so far. In this study, magnetic Barkhausen noise (MBN) signals on different silicon steel sheet locations under in situ tensile tests were detected by a high-spatial-resolution magnetic probe. The domain-wall (DW) motion, grain, and grain boundary were detected using a magneto-optical Kerr (MOKE) image. The time characteristic of DW motion and MBN signals on different locations was varied during elastic deformation. Therefore, a time-response histogram is proposed in this work to show different DW motions inside the grain and around the grain boundary under low tensile stress. In order to separate the variation of magnetic properties affected by the grain and grain boundary under low tensile stress corresponding to MBN excitation, time-division was carried out to extract the root-mean-square (RMS), mean, and peak in the optimized time interval. The time-response histogram of MBN evaluated the silicon steel sheet's inhomogeneous material properties, and provided a theoretical and experimental reference for ferromagnetic material properties under stress. [ABSTRACT FROM AUTHOR]

Highlights • The relationship between DW and grain boundary (GB) is analyzed. • The difference of DW distribution between grain and GB is highly affected by TS. • The repeatability of DW distribution in different locations of grain is illustrated. Abstract Stress measurement is an important field of non-destructive testing and evaluation (NDT&E). This can ensure stability and structural rigidity of workpieces. The challenging task of stress measurement is the properties characterization of the microscopic magnetic, especially the microstructure at different location of grains. The qualitative analysis of magnetic properties variation under low stress inside grain and around grain boundary are difficult to be obtained with a reliable solution. This paper investigates characters of the domain wall inside grains and around grain boundaries under low tensile stress. The domain walls of the silicon steel sheet are captured by the magneto-optical Kerr effect (MOKE) microscopy. The stress changes the magneto-elastic energy and the angle between magnetization and stress. The relationship among domain wall, magneto-elastic energy, the magnetization inside grains and around grains boundaries under different tensile stress is provided and analyzed in details. Magnetization work calculates the energy required for magnetization to quantify the difference of the magnetic domains distribution caused by increment of magneto-elastic energy under different tensile stress in different locations. The difference of magnetization work in these locations is highly affected by the tensile stress. This proposed work has the potential to evaluate the effect of grain and grain boundary on stress measurement. [ABSTRACT FROM AUTHOR]