Search

Molecular markers are increasingly being deployed to accelerate genetic gain in crop plants. The objective of this study was to assess the potential of a mid-density genotyping panel for molecular applications in cowpea breeding. A core set of 2,602 targeted diversity array technology (DArTag) single-nucleotide polymorphisms (SNPs) was designed from an existing 51,128 Cowpea iSelect Consortium Array. The panel's usefulness was assessed using 376 genotypes from different populations of known genetic backgrounds. The panel was informative, with over 78% of SNPs exceeding a minor allele frequency of 0.20. The panel decoded three stratifications in the constituted population, as was expected. Linkage disequilibrium (LD) decay was correctly depicted as slower in a biparental subset than in other populations. A known flower and seed coat color gene region was located on chromosome Vu07, suggesting that the mid-density panel may be used to hypothesize genomic regions underlying target traits in cowpea. Unexpected heterozygosity was detected in some lines and highly among F1 progenies, divulging the panel's potential application in germplasm purity and hybridity verification. The study unveils the potential of an excellent genomic resource that can be tapped to enhance the development of improved cowpea cultivars. [ABSTRACT FROM AUTHOR]

Para rubber trees (Hevea brasiliensis) are the largest major source of natural rubber in the world. Its major pathogens are Phytophthora spp., Corynespora cassiicola, and Colletotrichum spp. A rubber diversity panel of 116 clones using over 12,000 single nucleotide polymorphisms (SNPs) from DArTSeq genotyping revealed clear phylogenetic differences in clones that originated from different geographical regions of the world. An integrated linkage map constructed with an F1 progeny of 86 from an interspecific cross between H. brasiliensis and H. benthamiana using 23,978 markers [10,323 SNPs and 13,655 SilicoDArTs] spanned 3947.83 cM with 0.83 cM average marker-interval. The genome scaffolds that were anchored to the linkage map, covering 1.44 Gb of H. brasiliensis reference genome, revealed a high level of collinearity between the genetic map and reference genome. Association analysis identified 12 SNPs significantly associated with the resistance against Phytophthora, Corynespora, and Colletotrichum in six linkage groups: 2, 6, 12, 14, 17, and 18. Kompetitive Allele-Specific PCR marker assays were developed for those 12 SNPs, screened with 178 individuals, and detected clear separation between two genotypes. Within the proximity to those SNPs, 41 potentially key genes that have previously been reported to associate with plant disease resistance were predicted with high confidence. [ABSTRACT FROM AUTHOR]

Phalaris aquatica L. (phalaris) is a cool-season perennial grass originating from the Mediterranean Basin, north-west Africa and Middle Eastern regions that is used for livestock agriculture mainly in temperate areas with dry summers. It has been the subject of breeding programs in Australia, South America, New Zealand and the USA. Increased knowledge of relationships between wild and cultivated germplasm through use of molecular markers has the potential to facilitate future breeding gains. For this purpose, we conducted an analysis of P. aquatica by using 3905 polymorphic DArTseq SNP markers. Genetic diversity as measured by expected heterozygosity was similar for wild (HE = 0.14; n = 57) and cultivated (HE = 0.13; n = 37) accessions. Diversity in wild germplasm was generally continuous in nature, largely related to geographical location, with a division at the broadest scale into eastern and western clades, with more admixture in the western than the eastern clade. Structure analysis of wild germplasm indicated six subpopulations consistent with country of origin, with some admixture among subpopulations likely resulting from natural and human influences. There were nine subpopulations among wild and cultivated accessions combined. This population structure should be considered if genomic selection is applied in P. aquatica. Analysis of molecular variance indicated that 71% of the genetic variation occurred within subpopulations and 29% among subpopulations. Genetic distances were low among cultivated germplasm from most countries except the USA, which was more distinct. Evaluation of material from the US pool by breeding programs in other countries, and additional material from the less utilised eastern clade, may be worthwhile. Knowledge of genetic diversity is important for traditional and genomics-based breeding in the perennial pasture grass Phalaris aquatica. Use of molecular markers indicated the presence of nine groups among wild and cultivated germplasm, with close relationships among cultivars from most countries where P. aquatica is bred. Population structure should be considered for genomic breeding of P. aquatica and more testing of germplasm from less exploited germplasm groups may be worthwhile in future breeding. [ABSTRACT FROM AUTHOR]

Tolerance to metribuzin, a broad-spectrum herbicide, is an important trait for weed control in wheat breeding. However, the genetics of metribuzin tolerance in relation to the underlying quantitative trait loci (QTL) and genes is limited. This study developed F8 recombinant inbred lines (RILs) from a cross between a highly resistant genotype (Chuan Mai 25) and highly susceptible genotype (Ritchie), which were used for QTL mapping of metribuzin tolerance. Genotyping was done using a diversity arrays technology sequencing (DArTseq) platform, and phenotyping was done in controlled environments. Herbicide tolerance was measured using three traits, visual score (VS), reduction of chlorophyll content (RCC), and mean value of chlorophyll content for metribuzin-treated plants (MCC). A high-density genetic linkage map was constructed using 2,129 DArTseq markers. Inclusive composite interval mapping (ICIM) identified seven QTL, one each on chromosomes 2A, 2D, 3A, 3B, 4A, 5A, and 6A. Three major QTL— Qrcc.uwa.2AS , Qrcc.uwa.5AL , and Qrcc.uwa.6AL— explained 11.39%, 11.06%, and 11.45% of the phenotypic variation, respectively. The 5A QTL was further validated using kompetitive allele-specific PCR (KASP) assays in an F3 validation population developed from Chuan Mai 25 × Dagger. Blasting the single-nucleotide polymorphisms (SNPs) flanking the QTL in the wheat reference genome RefV1.0 revealed SNP markers within or very close to annotated genes which could be candidate genes responsible for metribuzin tolerance. Most of the candidate genes were related to metabolic detoxification, especially those of P450 pathway and xenobiotic transmembrane transporter activity, which are reportedly key molecules responsible for herbicide tolerance. This study is the first to use specially developed populations to conduct QTL mapping on the metribuzin tolerance trait. The three major QTL and candidate genes identified in this study could facilitate marker-assisted metribuzin breeding in wheat. The QTL could be fine-mapped to locate the genes responsible for metribuzin tolerance, which could be introgressed into elite wheat cultivars. [ABSTRACT FROM AUTHOR]

Bi-allelic Single Nucleotide Polymorphism (SNP) markers are widely used in population genetic studies. In most studies, sequences either side of the SNPs remain unused, although these sequences contain information beyond that used in population genetic studies. In this study, we show how these sequence tags either side of a single nucleotide polymorphism can be used for comparative genome analysis. We used DArTseq (Diversity Array Technology) derived SNP data for a non-model Australian native freshwater fish, Macquaria ambigua, to identify genes linked to SNP associated sequence tags, and to discover homologies with evolutionarily conserved genes and genomic regions. We concatenated 6,776 SNP sequence tags to create a hypothetical genome (representing 0.1–0.3% of the actual genome), which we used to find sequence homologies with 12 model fish species using the Ensembl genome browser with stringent filtering parameters. We identified sequence homologies for 17 evolutionarily conserved genes (cd9b, plk2b, rhot1b, sh3pxd2aa, si:ch211-148f13.1, si:dkey-166d12.2, zgc:66447, atp8a2, clvs2, lyst, mkln1, mnd1, piga, pik3ca, plagl2, rnf6, sec63) along with an ancestral evolutionarily conserved syntenic block (euteleostomi Block_210). Our analysis also revealed repetitive sequences covering approximately 12% of the hypothetical genome where DNA transposon, LTR and non-LTR retrotransposons were most abundant. A hierarchical pattern of the number of sequence homologies with phylogenetically close species validated the approach for repeatability. This new approach of using SNP associated sequence tags for comparative genome analysis may provide insight into the genome evolution of non-model species where whole genome sequences are unavailable. [ABSTRACT FROM AUTHOR]

Rohu (Labeo rohita) is a significant freshwater aquaculture species with approximately 1.8 Mt produced annually. Fin clips obtained from the founders of a newly established Bangladesh-based breeding population (∼140 fish from each of the Halda, Jamuna, and Padma rivers) were used to identify 9157 SNPs and 14 411 silicoDArT markers using the Diversity Arrays Technology (DArT) genotyping-by-sequencing platform known as DArTseq. After quality control, 1985 SNPs were retained and used to examine population structure within and among river systems. Examination of genomic relationships revealed evidence of full- and half-sibling relationships among founders. Accordingly, sibship and dummy parents were assigned within each river population using a maximum likelihood approach with COLONY software. Founders that had no dummy parents in common were then identified for population genetic analyses. Only 40 unique dummy parents and 17 founders with no common dummy parents were identified from the Halda river, compared with 206 (96) from the Jamuna and 184 (83) from the Padma. Overall pairwise FST estimates among rivers were low (<0.005) and the optimum number of clusters using unsupervised K-means clustering was one, indicating little genetic divergence among the river populations in our SNPs. These results suggest that observed sibship among founders should be accounted for in future pedigree-based analyses and it cannot be assumed that fertilized spawn collections are representative samples of river populations. [ABSTRACT FROM AUTHOR]

Here we present "Restore and Renew," a replicable framework for gathering and interpreting evolutionary, ecological, and genomic data in support of restoration practices. In an era of rapid climatic change and continuous widespread clearing, revegetation projects need to focus on producing resilient and long‐term self‐sustaining populations. Restore and Renew expands current knowledge of genetic provenance via genome‐scan data, environmental niche modeling (ENM), and site‐specific climate information. The sampling strategy is to obtain leaf tissue representing the distributions of over 100 species commonly used in restoration. We apply generalized dissimilarity modeling to genome‐wide single nucleotide polymorphism datasets from hundreds of samples. Species‐specific local provenances are obtained using a model that represents observed patterns of genetic variation across the landscape. Climate modeling is implemented to interpret genetic provenance boundaries in the context of current and future climatic conditions at the specified site. Results are presented in an easy‐to‐use webtool (www.restore‐and‐renew.org.au), where the user simply selects their site of interest and a target species to obtain the size and distribution of local genetic provenance. Although Restore and Renew is not prescriptive, it allows restoration practitioners to make informed decisions on where to source material from, to fulfill their restoration scenario of choice. Two examples, Westringia fruticosa and Acacia suaveolens, are presented to demonstrate how the analytical pipeline responds to different ecological and evolutionary patterns. The webtool has multiple applications for biodiversity management and will continue to evolve with new species and analytical/interpretative outputs. [ABSTRACT FROM AUTHOR]

Male sterility is of high importance in hybrid seed production of hot and sweet peppers. Genic (or nuclear) male sterility (GMS) is a simply inherited (usually monogenic recessive) and highly stable trait. However, one major disadvantage of using GMS is 1:1 segregation of male sterile to male fertile plants in every subsequent generation. Molecular markers tightly linked to genic male sterility (ms) genes would facilitate an efficient and rapid transfer of ms genes into different genetic backgrounds through marker-assisted backcrossing. The two non-allelic genic male sterility genes ms3 and ms w in hot and sweet pepper backgrounds, respectively, are monogenic recessive. Genotyping by sequencing (GBS) in an F2 population segregating for ms3 gene in hot pepper and in an F6 inbred near-isogenic line (NIL) population segregating for ms w gene in sweet pepper yielded 9,713 and 7,453 single nucleotide polymorphism markers, respectively. Four candidate SNPs co-segregating with ms3 gene and one co-segregating with ms w gene were identified by bulk segregant analysis and physically mapped to chromosomes 1 and 5, respectively. In hot pepper, two markers [HPGMS2 (CAPS) and HPGMS3 (dCAPS)] located 3.83 cM away from the ms3 gene and in sweet pepper the dCAPS marker SPGMS1 co-segregated (completely linked) with the ms w gene were developed. These markers will increase the efficacy of the male sterility genes for pepper breeding, as they can be useful in developing the genic male sterile lines in parental inbred lines of commercial hybrids through marker-assisted backcrossing, hybrid seed production, and genetic purity testing of hybrid seeds. [ABSTRACT FROM AUTHOR]

Macadamia (Macadamia integrifolia, M. tetraphylla and hybrids) is an Australian native nut crop and has a significant economic value in the food industries worldwide. Long juvenility along with traditional breeding strategies impede quick genetic improvement of this crop. The existing cultivars constitute only second to fourth generation of the wild germplasm in the rainforest. The utilisation of molecular markers for genomic selection and genome-wide association studies may accelerate genetic gains. Identification of a robust, reproducible, and cost-effective marker system is instrumental in increasing the efficiency of genomic studies. This study is the first to report the potential of two ultra-high-throughput diversity array technology (DArT) markers (silicoDArT and SNP) in macadamia. Both markers were used to identify the genetic diversity and population structure in 80 macadamia cultivars. Parentage analysis of 25 scions in a rootstock trial was conducted to confirm plant identity where recorded identities did not corroborate with phenotypic field observations. A total of 22,280 silicoDArT and 7,332 SNP markers were reported, of which 11,526 silicoDArT and 3,956 SNP markers were used for analyses after screening with quality control parameters including >95% call rate, >95% reproducibility, and >0.05 one ratio. The average polymorphic information content (PIC) values of silicoDArT and SNP markers were 0.29 and 0.21, respectively. Genetic variance among the cultivars ranged from 0.003 to 0.738 in silicoDArT and 0.004 to 0.412 in SNP markers. Four distinct population groups were identified from SNP data analysis. Most of the accessions used in this study were descended from two or more populations. Cluster analysis clearly separated genotypes of distinct origins, such as the Hawaii Agricultural Experiment Station and Hidden Valley Plantation accessions. Two wild accessions of Macadamia jansenii and M. ternifolia were found to be distantly related to the cultivars. Wild germplasm individuals and their hybrids with cv. ‘660’ formed separate clusters, suggesting that crossing between wild and cultivated genepools can extend genetic diversity. DArTseq-based SNP markers were successfully utilized to confirm the genetic identity of 25 scions in a rootstock trial. Our study suggests that DArT platforms are a robust system for the facilitation of genomic studies with regard to macadamia. [ABSTRACT FROM AUTHOR]

Pisum fulvum, a wild relative of pea is an important source of allelic diversity to improve the genetic resistance of cultivated species against fungal diseases of economic importance like the pea rust caused by Uromyces pisi. To unravel the genetic control underlying resistance to this fungal disease, a recombinant inbred line (RIL) population was generated from a cross between two P. fulvum accessions, IFPI3260 and IFPI3251, and genotyped using Diversity Arrays Technology. A total of 9,569 high-quality DArT-Seq and 8,514 SNPs markers were generated. Finally, a total of 12,058 markers were assembled into seven linkage groups, equivalent to the number of haploid chromosomes of P. fulvum and P. sativum. The newly constructed integrated genetic linkage map of P. fulvum covered an accumulated distance of 1,877.45 cM, an average density of 1.19 markers cM-1 and an average distance between adjacent markers of 1.85 cM. The composite interval mapping revealed three QTLs distributed over two linkage groups that were associated with the percentage of rust disease severity (DS%). QTLs UpDSII and UpDSIV were located in the LGs II and IV respectively and were consistently identified both in adult plants over 3 years at the field (Córdoba, Spain) and in seedling plants under controlled conditions. Whenever they were detected, their contribution to the total phenotypic variance varied between 19.8 and 29.2. A third QTL (UpDSIV.2) was also located in the LGIVand was environmentally specific as was only detected for DS % in seedlings under controlled conditions. It accounted more than 14% of the phenotypic variation studied. Taking together the data obtained in the study, it could be concluded that the expression of resistance to fungal diseases in P. fulvum originates from the resistant parent IFPI3260. [ABSTRACT FROM AUTHOR]

Rye is a crop with relatively high resistance to biotic and abiotic stresses. However, the resistance to brown rust ( Puccinia recondita f. sp. secalis) and pre-harvest sprouting are still not satisfactory. High α-amylase activity is also among the main disadvantages of this species. Therefore, effective tools, e.g. molecular markers, allowing precise and environmentally independent selection of favourable alleles are desirable. In the present study, two kinds of association mapping-genome-wide association mapping (GWAM) based on sequences of DArTSeq markers and candidate gene association mapping (CGAM) based on sequences of ScBx genes-were chosen for development of molecular markers fulfilling these criteria. The analysed population consisted of 149 diverse inbred lines (DILs). Altogether, 67 and 11 single nucleotide polymorphisms (SNPs) identified in, respectively, GWAM and CGAM, were significantly associated with the investigated traits: 2 SNPs with resistance to brown rust, 71 SNPs with resistance to pre-harvest sprouting and 5 SNPs with α-amylase activity in the grain. Fifteen SNPs were stable across all environments. The highest number (13) of environmentally stable SNPs was associated with pre-harvest sprouting resistance. The test employing the Kompetitive Allele Specific PCR method proved the versatility of four markers identified in both GWAM and CGAM. [ABSTRACT FROM AUTHOR]

Watermelon [Citrullus lanatus (Thunb.) Matsum. & Nakai var. lanatus ] is an economically important vegetable belonging to the Cucurbitaceae family. Genotypes that exhibit agronomically important traits are selected for the development of elite cultivars. Understanding the genetic diversity and the genotype population structure based on molecular markers at the genome level can speed up the utilization of diverse genetic resources for varietal improvement. In the present study, we carried out an analysis of genetic diversity based on 3882 SNP markers across 37 core watermelon genotypes, including the most widely used watermelon varieties and wild watermelon. Based on the SNP genotyping data of the 37 watermelon genotypes screened, gene diversity and polymorphism information content values across chromosomes varied between 0.03-0.5 and 0.02-0.38, with averages of 0.14 and 0.13, respectively. The two wild watermelon genotypes were distinct from cultivated varieties and the remaining 35 cultivated genotypes were differentiated into three major clusters: 20 genotypes were grouped in cluster I; 11 genotypes were grouped in cluster II; three advanced breeding lines of yellow fruit flesh and genotype SW043 were grouped in cluster III. The results from neighbour-joining dendrogram, principal coordinate analysis and STRUCTURE analysis approaches were consistent, and the grouping of genotypes was generally in agreement with their origins. Here we reveal the genetic relationships among the core watermelon genotypes maintained at the Jiangsu Academy of Agricultural Sciences, China. The molecular and phenotypic characterization of the existing core watermelon genotypes, together with specific agronomic characteristics, can be utilized by researchers and breeders for future watermelon improvement. [ABSTRACT FROM AUTHOR]

Watermelon [ Citrullus lanatus (Thunb.) Matsum. & Nakai] is an economically important vegetable crop grown extensively worldwide. To facilitate the identification of agronomically important traits and provide new information for genetic and genomic research on this species, a high-density genetic linkage map of watermelon was constructed using an F population derived from a cross between elite watermelon cultivar K3 and wild watermelon germplasm PI 189225. Based on a sliding window approach, a total of 1,161 bin markers representing 3,465 SNP markers were mapped onto 11 linkage groups corresponding to the chromosome pair number of watermelon. The total length of the genetic map is 1,099.2 cM, with an average distance between bins of 1.0 cM. The number of markers in each chromosome varies from 62 in chromosome 07 to 160 in chromosome 05. The length of individual chromosomes ranged between 61.8 cM for chromosome 07 and 140.2 cM for chromosome 05. A total of 616 SNP bin markers showed significant ( P < 0.05) segregation distortion across all 11 chromosomes, and 513 (83.3 %) of these distorted loci showed distortion in favor of the elite watermelon cultivar K3 allele and 103 were skewed toward PI 189225. The number of SNPs and InDels per Mb varied considerably across the segregation distorted regions (SDRs) on each chromosome, and a mixture of dense and sparse SNPs and InDel SDRs coexisted on some chromosomes suggesting that SDRs were randomly distributed throughout the genome. Recombination rates varied greatly among each chromosome, from 2.0 to 4.2 centimorgans per megabase (cM/Mb). An inconsistency was found between the genetic and physical positions on the map for a segment on chromosome 11. The high-density genetic map described in the present study will facilitate fine mapping of quantitative trait loci, the identification of candidate genes, map-based cloning, as well as marker-assisted selection (MAS) in watermelon breeding programs. [ABSTRACT FROM AUTHOR]

The RWA, Diuraphis noxia (Kurdjumov), is a devastating insect pest of wheat ( Triticum aestivum L.) and barley ( Hordeum vulgare) in the United States and in many parts of the world. The use of D. noxia-resistant cultivars is an economically useful approach for protecting cereals from this aphid. However, there are few genes conferring resistance to the most predominant US biotype (Biotype RWA2). Wheat line CI2401, originating from Tajikistan, has been identified to be resistant to RWA2. An F-derived F (F) segregating population developed from a cross between CI2401 and Glupro (a high quality susceptible wheat cultivar) was used to genetically map the resistance in CI2401. Seedlings from F individuals and F families were infested with RWA2 aphids. Seedling reactions were scored as resistant or susceptible based on the degrees of leaf rolling and chlorosis. The observed segregation ratios in the F and F generations indicate the presence of a major dominant gene controlling resistance to RWA2. The gene, named Dn2401, was genetically mapped to the short arm of chromosome 7D. Xbarc214 mapped 1.1 cM and Xgwm473 mapped 1.8 cM distal and proximal, respectively, to the gene. Association studies using more than 12,000 SNPs and SilicoDArTs confirmed the presence of a major signal associated with resistance on chromosome 7DS. In addition, a minor signal was detected in chromosome 1D. The markers developed in this study will be useful for marker-assisted-breeding for resistance to RWA2. [ABSTRACT FROM AUTHOR]

Malting barley is of high economic and scientific importance. Determining barley grains that are suitable for malting involves measuring malting quality, which is an expensive and complex process. In order to decrease the cost of phenotyping and accelerate the process of developing superior malting barley cultivars, markers for marker-assisted breeding are needed. In this study, we identified quantitative trait loci (QTLs) for malting traits in a Stellar/01Ab8219 F6:8 recombinant inbred line population grown at Aberdeen and Tetonia, Idaho, USA in 2009 and 2010. We identified QTLs associated with malt extract (ME), wort protein, soluble/total protein (S/T), diastatic power (DP), alpha-amylase, beta-glucan (BG) and free amino nitrogen (FAN) at a logarithm of odds score ≥2.5 using a high-density genetic map produced by merging Diversity Arrays Technology markers with the current single nucleotide polymorphism map. Novel QTLs were identified for DP and FAN on chromosome 5H, S/T on 6H, and BG and ME on 7H. Dissection of the genetic regions associated with malting traits suggests the involvement of multiple molecular pathways. The resulting molecular markers may prove useful for barley improvement. [ABSTRACT FROM AUTHOR]

Background Sugarcane genetic mapping has lagged behind other crops due to its complex autopolyploid genome structure. Modern sugarcane cultivars have from 110-120 chromosomes and are in general interspecific hybrids between two species with different basic chromosome numbers: Saccharum officinarum (2n = 80) with a basic chromosome number of 10 and S. spontaneum (2n = 40-128) with a basic chromosome number of 8. The first maps that were constructed utilised the single dose (SD) markers generated using RFLP, more recent maps generated using AFLP and SSRs provided at most 60% genome coverage. Diversity Array Technology (DArT) markers are high throughput allowing greater numbers of markers to be generated. Results Progeny from a cross between a sugarcane variety Q165 and a S. officinarum accession IJ76- 514 were used to generate 2467 SD markers. A genetic map of Q165 was generated containing 2267 markers, These markers formed 160 linkage groups (LGs) of which 147 could be placed using allelic information into the eight basic homology groups (HGs) of sugarcane. The HGs contained from 13 to 23 LGs and from 204 to 475 markers with a total map length of 9774.4 cM and an average density of one marker every 4.3 cM. Each homology group contained on average 280 markers of which 43% were DArT markers 31% AFLP, 16% SSRs and 6% SNP markers. The multi-allelic SSR and SNP markers were used to place the LGs into HGs. Conclusions The DArT array has allowed us to generate and map a larger number of markers than ever before and consequently to map a larger portion of the sugarcane genome. This larger number of markers has enabled 92% of the LGs to be placed into the 8 HGs that represent the basic chromosome number of the ancestral species, S. spontaneum. There were two HGs (HG2 and 8) that contained larger numbers of LGs verifying the alignment of two sets of S. officinarum chromosomes with one set of S. spontaneum chromosomes and explaining the difference in basic chromosome number between the two ancestral species. There was also evidence of more complex structural differences between the two ancestral species. [ABSTRACT FROM AUTHOR]

We present the first results from a novel multiparent advanced generation inter-cross (MAGIC) population derived from four elite wheat cultivars. The large size of this MAGIC population (1579 progeny), its diverse genetic composition and high levels of recombination all contribute to its value as a genetic resource. Applications of this resource include interrogation of the wheat genome and the analysis of gene-trait association in agronomically important wheat phenotypes. Here, we report the utilization of a MAGIC population for the first time for linkage map construction. We have constructed a linkage map with 1162 DArT, single nucleotide polymorphism and simple sequence repeat markers distributed across all 21 chromosomes. We benchmark this map against a high-density DArT consensus map created by integrating more than 100 biparental populations. The linkage map forms the basis for further exploration of the genetic architecture within the population, including characterization of linkage disequilibrium, founder contribution and inclusion of an alien introgression into the genetic map. Finally, we demonstrate the application of the resource for quantitative trait loci mapping using the complex traits plant height and hectolitre weight as a proof of principle. [ABSTRACT FROM AUTHOR]

Background: Yellow lupin (Lupinus luteus L.) is a promising grain legume for productive and sustainable crop rotations. It has the advantages of high tolerance to soil acidity and excellent seed quality, but its current yield potential is poor, especially in low rainfall environments. Key adaptation traits such as phenology and enhanced stress tolerance are often complex and controlled by several genes. Genomic-enabled technologies may help to improve our basic understanding of these traits and to provide selective markers in breeding. However, in yellow lupin there are very limited genomic resources to support research and no published information is available on the genetic control of adaptation traits. Results: We aimed to address these deficiencies by developing the first linkage map for yellow lupin and conducting quantitative trait locus (QTL) analysis of yield under well-watered (WW) and water-deficit (WT) conditions. Two next-generation sequencing marker approaches - genotyping-by-sequencing (GBS) and Diversity Array Technology (DArT) sequencing - were employed to genotype a recombinant inbred line (RIL) population developed from a bi-parental cross between wild and domesticated parents. A total of 2,458 filtered single nucleotide polymorphism (SNP) and presence / absence variation (PAV) markers were used to develop a genetic map comprising 40 linkage groups, the first reported for this species. A number of significant QTLs controlling total biomass and 100-seed weight under two water (WW and WD) regimes were found on linkage groups YL-03, YL-09 and YL-26 that together explained 9 and 28% of total phenotypic variability. QTLs associated with length of the reproductive phase and time to flower were found on YL-01, YL-21, YL-35 and YL-40 that together explained a total of 12 and 44% of total phenotypic variation. Conclusion: These genomic resources and the QTL information offer significant potential for use in marker-assisted selection in yellow lupin. [ABSTRACT FROM AUTHOR]