Search

The computer-aided craniofacial reconstruction (CFR) technique has been widely used in the fields of criminal investigation, archaeology, anthropology and cosmetic surgery. The evaluation of craniofacial reconstruction results is important for improving the effect of craniofacial reconstruction. Here, we used the sparse principal component analysis (SPCA) method to evaluate the similarity between two sets of craniofacial data. Compared with principal component analysis (PCA), SPCA can effectively reduce the dimensionality and simultaneously produce sparse principal components with sparse loadings, thus making it easy to explain the results. The experimental results indicated that the evaluation results of PCA and SPCA are consistent to a large extent. To compare the inconsistent results, we performed a subjective test, which indicated that the result of SPCA is superior to that of PCA. Most importantly, SPCA can not only compare the similarity of two craniofacial datasets but also locate regions of high similarity, which is important for improving the craniofacial reconstruction effect. In addition, the areas or features that are important for craniofacial similarity measurements can be determined from a large amount of data. We conclude that the craniofacial contour is the most important factor in craniofacial similarity evaluation. This conclusion is consistent with the conclusions of psychological experiments on face recognition and our subjective test. The results may provide important guidance for three- or two-dimensional face similarity evaluation, analysis and face recognition.

Craniofacial reconstruction recreates a facial outlook from the cranium based on the relationship between the face and the skull to assist identification. But craniofacial structures are very complex, and this relationship is not the same in different craniofacial regions. Several regional methods have recently been proposed, these methods segmented the face and skull into regions, and the relationship of each region is then learned independently, after that, facial regions for a given skull are estimated and finally glued together to generate a face. Most of these regional methods use vertex coordinates to represent the regions, and they define a uniform coordinate system for all of the regions. Consequently, the inconsistence in the positions of regions between different individuals is not eliminated before learning the relationships between the face and skull regions, and this reduces the accuracy of the craniofacial reconstruction. In order to solve this problem, an improved regional method is proposed in this paper involving two types of coordinate adjustments. One is the global coordinate adjustment performed on the skulls and faces with the purpose to eliminate the inconsistence of position and pose of the heads; the other is the local coordinate adjustment performed on the skull and face regions with the purpose to eliminate the inconsistence of position of these regions. After these two coordinate adjustments, partial least squares regression (PLSR) is used to estimate the relationship between the face region and the skull region. In order to obtain a more accurate reconstruction, a new fusion strategy is also proposed in the paper to maintain the reconstructed feature regions when gluing the facial regions together. This is based on the observation that the feature regions usually have less reconstruction errors compared to rest of the face. The results demonstrate that the coordinate adjustments and the new fusion strategy can significantly improve the craniofacial reconstructions., (Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.)

Craniofacial reconstruction is to estimate an individual's face model from its skull. It has a widespread application in forensic medicine, archeology, medical cosmetic surgery, and so forth. However, little attention is paid to the evaluation of craniofacial reconstruction. This paper proposes an objective method to evaluate globally and locally the reconstructed craniofacial faces based on the geodesic network. Firstly, the geodesic networks of the reconstructed craniofacial face and the original face are built, respectively, by geodesics and isogeodesics, whose intersections are network vertices. Then, the absolute value of the correlation coefficient of the features of all corresponding geodesic network vertices between two models is taken as the holistic similarity, where the weighted average of the shape index values in a neighborhood is defined as the feature of each network vertex. Moreover, the geodesic network vertices of each model are divided into six subareas, that is, forehead, eyes, nose, mouth, cheeks, and chin, and the local similarity is measured for each subarea. Experiments using 100 pairs of reconstructed craniofacial faces and their corresponding original faces show that the evaluation by our method is roughly consistent with the subjective evaluation derived from thirty-five persons in five groups.

Sex determination from skeletons is an important research subject in forensic medicine. Previous skeletal sex assessments are through subjective visual analysis by anthropologists or metric analysis of sexually dimorphic features. In this work, we present an automatic sex determination method for 3D digital skulls, in which a statistical shape model for skulls is constructed, which projects the high-dimensional skull data into a low-dimensional shape space, and Fisher discriminant analysis is used to classify skulls in the shape space. This method combines the advantages of metrical and morphological methods. It is easy to use without professional qualification and tedious manual measurement. With a group of Chinese skulls including 127 males and 81 females, we choose 92 males and 58 females to establish the discriminant model and validate the model with the other skulls. The correct rate is 95.7% and 91.4% for females and males, respectively. Leave-one-out test also shows that the method has a high accuracy.

Craniofacial reconstruction is important in forensic identification. It aims to estimate a facial appearance for human skeletal remains using the relationship between the soft tissue and the underlying bone structure. Various computerized methods have been developed in recent decades. An effective way is to deform a reference skull to the discovered skull, and then apply the same deformation to the skin associated with the reference skull to provide an approximate face for the discovered skull. For this method, the better the two skulls match each other, the more face-like the reconstructed skin surface will be. In this paper, we present a novel skull registration method that can match the two skulls closely, so as to improve the accuracy of the reconstruction. It combines both global and local deformations. A generic thin-plate spline (TPS)-based deformation, which is global, is applied first to roughly align the two skulls based on two groups of manually defined landmarks. Afterwards, the two skulls are largely matched, except some regions, on which some new landmarks are automatically marked. A compact support radial basis functions (CSRBF)-based deformation, which is local, will then be performed on these regions to adjust the initial alignment of the two skulls. Such adjustment can be repeatedly implemented until the two skulls have optimal alignment. In addition, all the skulls and face involved in the registration are represented by their single outer surfaces to facilitate the reconstruction procedure. The experiments demonstrate that our method can create a plausible face even when the reference skull is very different from the discovered skull. As a result, we can make full use of our database to provide multiple estimates for a principle components analysis (PCA) for the final reconstruction., (Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.)

The human mandible reconstruction is widely used in medical cosmetology, criminal investigation, archaeology and anthropology. This study is devoted to rapidly reconstructing 3D personalized mandibles, especially when the mandible is severely damaged or totally lost. An example-oriented method based on principal component analysis (PCA) is used to reconstruct the 3D shapes of mandibles. The predictor variable is an input cranium, while the response variables is a full mandible. The linear relationship between the cranium and mandible is obtained based on a number of skull samples, which is used as prior knowledge. The PCA method reduces the dimensionality of the skull data to improve the accuracy and speed of the reconstruction process. Experiments are conducted based on 215 skull models in the Chinese craniofacial database established in the study of craniofacial morphology informatics at Beijing Normal University. In our experiments, parameters are modified to help improve the reconstruction results. The proposed method exhibits higher accuracy than state-of-the-art methods according to comparison experiments results. Moreover, this method is robust to various types of input data and noise. Results indicate the proposed method is a fast and feasible tool for reconstructing 3D customized full mandibles. [ABSTRACT FROM AUTHOR]

Research regarding the similarity measurements of 3D craniofacial models (including 3D skull and face models) is an important research direction in fields such as archaeology, forensic science, and anthropology and represents a meaningful and challenging task. Its major challenges are the fact that 3D skulls are geometric models with multiple holes and complex topologies, there are facial expression changes on the 3D faces. Therefore, the general 3D shape similarity measurements, which are sensitive to boundaries and expression changes, make it impossible to simultaneously measure skull and face similarity. In this paper, we define a 3D signature to describe the pure intrinsic structure and distinguish the similar basic shape and complex topology of 3D skulls and faces: the harmonic wave kernel signature (HWKS). The HWKS is a point descriptor involving the Laplace–Beltrami operator, which is able to effectively extract geometrical and topological information from 3D skulls and faces. Based on the HWKS, we provide an effective pipeline for 3D skull and face similarity measurement by calculating the cosine distance between the HWKS values of 3D skulls and faces. By making comparisons with the wave kernel signature, the HWKS simultaneously describes both local and global properties of a shape. Results from a number of experiments have already shown that our framework is suitable for both measure 3D skull similarity and face similarity, and more importantly, measuring skull similarity and face similarity are two independent processes although using the same framework. By using the same measurement method for 3D skull similarity and face similarity, we observe an effective craniofacial relationship under unified metrics: The change rate of skull similarity is generally consistent with the corresponding face similarity, indicating the correlation between the shape of the 3D skull and its corresponding 3D face shape. And our experimental results show the rationality and effectiveness of this method, which refers to the previous researchers measure the similarity of the reconstructed face from the original skull to reflect the similarity of the original skull. [ABSTRACT FROM AUTHOR]

Craniofacial reconstruction aims to estimate an individual's facial appearance from its skull. It can be applied in many multimedia services such as forensic medicine, archaeology, face animation etc. In this paper, a statistical learning based method is proposed for 3D craniofacial reconstruction. In order to well represent the craniofacial shape variation and better utilize the relevance between different local regions, two tensor models are constructed for the skull and the face skin respectively, and multi-linear subspace analysis is used to extract the craniofacial subspace features. A partial least squares regression (PLSR) based mapping from skull subspace to skin subspace is established with the attributes such as age and BMI being considered. For an unknown skull, the 3D face skin is reconstructed using the learned mapping with the help of the skin tensor model. Compared with some other statistical learning based method in literature, the proposed method more directly and properly reflects the shape relationship between the skull and the face. In addition, the proposed method has little manual intervention. Experimental results show that the proposed method is valid. [ABSTRACT FROM AUTHOR]

3D face reconstruction from skull has been investigated deeply by computer scientists in the past two decades because it is important for identification. The dominant methods construct 3D face from the soft tissue thickness measured at a set of landmarks on skull. The quantity and position of the landmarks are very vital for 3D face reconstruction, but there is no uniform standard for the selection of the landmarks. Additionally, the acquirement of the landmarks on skull is difficult without manual assistance. In this paper, an automatic 3D face reconstruction method based on a hierarchical dense deformable model is proposed. To construct the model, the skull and face samples are acquired by CT scanner and represented as dense triangle mesh. Then a non-rigid dense mesh registration algorithm is presented to align all the samples in point-to-point correspondence. Based on the aligned samples, a global deformable model is constructed, and three local models are constructed from the segmented patches of the eye, nose and mouth. For a given skull, the globe and local deformable models are iteratively matched with it, and the reconstructed facial surface is obtained by fusing the globe and local reconstruction results. To validate the presented method, a measurement in the coefficient domain of a face deformable model is defined. The experimental results indicate that the proposed method has good performance for 3D face reconstruction from skull. [ABSTRACT FROM AUTHOR]