Search

This paper is aimed at evaluating, from a techno-economic and environmental point of view, the performance of an existing wastewater treatment plant in which the traditional biological section is upgraded with an innovative Sequencing Batch Biofilter Granular Reactor. Two scenarios were simulated in order to model and assess the performances of conventional (CAS, Conventional Activated Sludge) and innovative solutions, based on mass balances, techno-economic evaluation and environmental assessment. The results showed that converting the activated sludge process into an SBBGR allows to achieve a drastic reduction in sludge production (up to 75% as volatile suspended solids). Furthermore, the secondary sedimentation and sludge stabilization units can be dismissed, reducing the area requirement (up to 50%). The technical assessment is mainly positive, with the electric energy consumption being the only critical item. The higher energy demand of the upgraded plant (about 25% more than the conventional treatment) is mainly associated with the recycle flow in the SBBGR system. Although the economic sustainability of the upgraded plant depends on local conditions, it can be considered to be likely favourable: sludge disposal and materials & reagents costs, together with the investment for plant reconstruction are those items that should be carefully evaluated before upgrading the CAS plant with SBBGR technology. The environmental assessment shows also mostly positive results, although it points to the increased phosphorus concentration in the effluent as a potentially critical issue and it highlights the electricity use and the increased nitrous oxide generation as other matters that need to be carefully checked in real case application. [ABSTRACT FROM AUTHOR]

[Display omitted] Identify sustainable biological sewage sludge (BSS) management represents a current challenge. In this work, pre-thickened BSS taken from a large-scale urban wastewater treatment plant (WWTP) was fed continuously for about 9 months to a semi-industrial scale thermophilic biological fluidized bed reactor (TBFBR) operating in alternate conditions. The BSS treated in TBFBR was strongly reduced (89–92%) and the production was evaluated in 0.0007–0.0023 kg kg CODremoved −1 d−1 and 0.0004–0.0014 kg kg CODremoved −1 d−1 of TS and VS, respectively. The 92% of the P-PO 4 3- and P-org precipitated in inorganic form and accumulated in thermophilic biological sludge (TBS). In basic soils with chelating activity, phosphorus contained in TBS presented a higher bioavailability (84.0 ± 25.3%) with respect to untreated sludge. The analysis of four diverse scenarios highlighted that TBFBR located after pre-thickening could save 73–96% of operating costs with respect to current situation. [ABSTRACT FROM AUTHOR]

Sludge recovery/disposal represents one of the most crucial aspects related to the management of wastewater treatment plants. The most widely diffused technology for the treatment of industrial and municipal wastewaters is the conventional activated sludge (CAS) process, which is characterized by a relatively high excess sludge production. Different technical solutions are proposed in the literature for sludge minimization and they can be applied either on wastewater line (WL) or sludge line (SL). This work is focused on different approaches based on the use of Thermophilic Aerobic Membrane Reactor (TAMR): this can be added to a CAS plant, and integrated to WL or SL, yielding a significant sludge reduction. The process performance was analysed in terms of volatile solids (VS) reduction and specific sludge production. The TAMR was tested both at full-scale and pilot-scale with different feeding substrates: industrial wastewater for the full-scale plant; industrial wastewater, sludge and a mix of these for the pilot-scale plants. The results obtained are: (i) good solids removal (38–90% and 40–50% in terms of VS for sludge and mix of industrial wastewater and sludge, respectively), (ii) low specific sludge production (0.01–0.09 kg VSS produced kg COD removed −1 for industrial wastewater and 0.014–0.069 kg VSS produced kg COD removed −1 for mix of industrial wastewater and sludge) and (iii) a significant reduction of sludge when CAS is improved with the TAMR technology. Image 1 • Different substrates were fed to Thermophilic Aerobic Membrane Reactor. • Upgrading of conventional activated sludge system were studied. • Up to 90% of volatile solids reduction was obtained. • Sludge production is one order of magnitude lower than other biological processes. [ABSTRACT FROM AUTHOR]

The increase of sewage sludge production together with the high treatment and disposal costs in the last years has pushed to study different solutions aimed at sludge minimization. In this paper, the thermophilic membrane technology was evaluated as an alternative for municipal sewage sludge reduction. The experimentation (carried out by means of a pilot scale plant, 1 m 3 volume) was divided into two steps: the first one was aimed at confirming the results obtained in a previous research focused on industrial sludge treatment; the second step was devoted to define the best process conditions (in particular the optimization of the aeration phases) and to the chemical permeate characterization. The results of the experiments highlight that the hydraulic retention time (HRT) and aeration conditions play a crucial role on the overall process performance. The volatile suspended solids removal efficiency was greater than 80% under the following conditions: HRT even lower than 15 d; 2 h of aeration - 6 h of non aeration cycles; and organic loading rate of 2.0 kgCOD m −3 d −1 . The permeate showed a good biodegradability under mesophilic conditions thus being treatable by means of conventional biological processes. Moreover, ammonia (the permeate presenting high concentrations) could be recovered as a fertilizer (stripping and subsequent washing of the exhausted gas is an established technique). Finally, the ammonia-free permeate can be valorised as a carbon source in denitrification processes. [ABSTRACT FROM AUTHOR]

The management of sewage sludge is becoming a more and more important issue, both at national and international level, in particular due to the uncertain recovery/disposal future options. Therefore, it is clear that the development of new technologies that can mitigate the problem at the source by reducing sludge production is necessary, such as the European Directive 2008/98/EC prescribes. This work shows the results obtained with a thermophilic membrane reactor, for processing a biological sludge derived from a wastewater treatment plant (WWTP) that treats urban and industrial wastewater. Sewage sludge was treated in a thermophilic membrane reactor (TMR), at pilot-scale (1 m 3 volume), with alternate aeration cycles. The experimentation was divided into two phases: a “startup phase” during which, starting with a psychrophilic/mesophilic biomass, thermophilic conditions were progressively reached, while feeding a highly biodegradable substrate; the obtained thermophilic biomass was then used, in the “regime phase”, to digest biological sludge which was fed to the plant. Good removal yields were observed: 64% and 57% for volatile solids (VS) and total COD (COD tot ), respectively, with an average hydraulic retention time (HRT) equal to 20 d, an organic loading rate (OLR) of about 1.4–1.8 kg COD m −3 d −1 and aeration/non aeration cycles alternated every 4 h. [ABSTRACT FROM AUTHOR]

Minimizing the biological sewage sludge (BSS) produced by wastewater treatment plants (WWTPs) represents an increasingly difficult challenge. With this goal, tests on a semi-full scale Thermophilic Alternate Membrane Biological Reactor (ThAlMBR) were carried out for 12 months. ThAlMBR was applied both on thickened (TBSS) and digested biological sewage sludge (DBSS) with alternating aeration conditions, and emerged: (i) high COD removal yields (up to 90%), (ii) a low specific sludge production (0.02–0.05 kgVS produced/kgCODremoved), (iii) the possibility of recovery the aqueous carbon residue (permeate) in denitrification processes, replacing purchased external carbon sources. Based on the respirometric tests, an excellent biological treatability of the permeate by the mesophilic biomass was observed and the denitrification kinetics reached with the diluted permeate ((4.0 mgN-NO3−/(gVSS h)) were found comparable to those of methanol (4.4 mgN-NO3−/(gVSS h)). Moreover, thanks to the similar results obtained on TBSS and DBSS, ThAlMBR proved to be compatible with diverse sludge line points, ensuring in both cases an important sludge minimization. [ABSTRACT FROM AUTHOR]