Search

This study proposes a modularized soft robotic arm with integrated sensing of human touches for physical human–robot interactions. The proposed robotic arm is constructed by connecting multiple soft manipulator modules, each of which consists of three bellow-type soft actuators, pneumatic valves, and an on-board sensing and control circuit. By employing stereolithography three-dimensional (3D) printing technique, the bellow actuator is capable of incorporating embedded organogel channels in the thin wall of its body that are used for detecting human touches. The organogel thus serves as a soft interface for recognizing the intentions of the human operators, enabling the robot to interact with them while generating desired motions of the manipulator. In addition to the touch sensors, each manipulator module has compact, soft string sensors for detecting the displacements of the bellow actuators. When combined with an inertial measurement unit (IMU), the manipulator module has a capability of estimating its own pose or orientation internally. We also propose a localization method that allows us to estimate the location of the manipulator module and to acquire the 3D information of the target point in an uncontrolled environment. The proposed method uses only a single depth camera combined with a deep learning model and is thus much simpler than those of conventional motion capture systems that usually require multiple cameras in a controlled environment. Using the feedback information from the internal sensors and camera, we implemented closed-loop control algorithms to carry out tasks of reaching and grasping objects. The manipulator module shows structural robustness and the performance reliability over 5,000 cycles of repeated actuation. It shows a steady-state error and a standard deviation of 0.8 mm and 0.3 mm, respectively, using the proposed localization method and the string sensor data. We demonstrate an application example of human–robot interaction that uses human touches as triggers to pick up and manipulate target objects. The proposed soft robotic arm can be easily installed in a variety of human workspaces, since it has the ability to interact safely with humans, eliminating the need for strict control of the environments for visual perception. We believe that the proposed system has the potential to integrate soft robots into our daily lives. [ABSTRACT FROM AUTHOR]

Soft robotics can be used not only as a means of achieving novel, more lifelike forms of locomotion, but also as a tool to understand complex biomechanics through the use of robotic model animals. Herein, the control of the undulation mechanics of an entirely soft robotic subcarangiform fish is presented, using antagonistic fast‐PneuNet actuators and hyperelastic eutectic gallium–indium (eGaIn) embedded in silicone channels for strain sensing. To design a controller, a simple, data‐driven lumped parameter approach is developed, which allows accurate but lightweight simulation, tuned using experimental data and a genetic algorithm. The model accurately predicts the robot's behavior over a range of driving frequencies and a range of pressure amplitudes, including the effect of antagonistic co‐contraction of the soft actuators. An amplitude controller is prototyped using the model and deployed to the robot to reach the setpoint of a tail‐beat amplitude using fully soft and real‐time strain sensing. [ABSTRACT FROM AUTHOR]

Soft robots are considered to have infinite degrees of freedom based on their structural compliance, providing high adaptability to the environments, and recent study has focused mostly on advancement of their physical designs for increasing the adaptability. However, interaction itself with the environment has not been taken into serious account in previous studies despite the importance in applications. A soft robot as a hybrid system described by both discrete and continuous states is considered and a method of analysis for enhanced manipulation is proposed. The method is tested with a soft gripper composed of a pneumatic bending actuator and an embedded soft sensor for a task of object gripping. The optimum sensor location on the actuator based on the calibration map obtained from the actuator characterization is first determined. Using the sensor information, the interaction with the environment (i.e., object) classified into four discrete states is understood. In addition, a control strategy to find the best position to grip the object based on the estimated states is developed. The gripper is able to successfully complete the task using the proposed method for three test scenarios with different initial conditions and control parameters. Finally, the results are demonstrated with supporting videos. [ABSTRACT FROM AUTHOR]

Multi-Fingered haptics is imperative for truly immersive virtual reality experience, as many real-world tasks involve finger manipulation. One of the key lacking aspect for this is the absence of technologically and economically viable wearable haptic interfaces that can simultaneously track the finger/hand motions and display multi-degree-of-freedom (DOF) contact forces. In this paper, we propose a novel wearable cutaneous haptic interface (WCHI), which consists of 1) finger tracking modules (FTMs) to estimate complex multi-DOF finger and hand motion; and 2) cutaneous haptic modules (CHMs) to convey three-DOF contact force at the finger-tip. By opportunistically utilizing such different types of sensors as inertial measurement units, force sensitive resistor sensors, and soft sensors, the WCHI can track complex anatomically consistent multi-DOF finger motion while avoiding FTM-CHM electromagnetic interference possibly stemming from their collocation in the small form-factor interface; while also providing the direction and magnitude of three-DOF finger-tip contact force, the feedback of which can significantly enhance the precision of contact force generation against variability among users via their closed-loop control. Human subject study is performed with a virtual peg insertion task to show the importance of both the multi-DOF finger tracking and the three-DOF cutaneous haptic feedback for dexterous manipulation in virtual environment. [ABSTRACT FROM AUTHOR]

Soft sensors are becoming more popular in wearables as a means of tracking human body motions due to their high stretchability and easy wearability. However, previous research not only was limited to only certain body parts, but also showed problems in both calibration and processing of the sensor signals, which are caused by the high nonlinearity and hysteresis of the soft materials and also by the misplacement and displacement of the sensors during motion. Although this problem can be alleviated through redundancy by employing an increased number of sensors, it will lay another burden of heavy processing and power consumption. Moreover, complete full-body motion tracking has not been achieved yet. Therefore, we propose use of deep learning for full-body motion sensing, which significantly increases efficiency in calibration of the soft sensor and estimation of the body motions. The sensing suit is made of stretchable fabric and contains 20 soft strain sensors distributed on both the upper and the lower extremities. Three athletic motions were tested with a human subject, and the proposed learning-based calibration and mapping method showed a higher accuracy than traditional methods that are mainly based on mathematical estimation, such as linear regression. [ABSTRACT FROM AUTHOR]

Wearable robots based on soft materials will augment mobility and performance of the host without restricting natural kinematics. Such wearable robots will need soft sensors to monitor the movement of the wearer and robot outside the lab. Until now wearable soft sensors have not demonstrated significant mechanical robustness nor been systematically characterized for human motion studies of walking and running. Here, we present the design and systematic characterization of a soft sensing suit for monitoring hip, knee, and ankle sagittal plane joint angles. We used hyper-elastic strain sensors based on microchannels of liquid metal embedded within elastomer, but refined their design with the use of discretized stiffness gradients to improve mechanical durability. We found that these robust sensors could stretch up to 396% of their original lengths, would restrict the wearer by less than 0.17% of any given joint’s torque, had gauge factor sensitivities of greater than 2.2, and exhibited less than 2% change in electromechanical specifications through 1500 cycles of loading–unloading. We also evaluated the accuracy and variability of the soft sensing suit by comparing it with joint angle data obtained through optical motion capture. The sensing suit had root mean square (RMS) errors of less than 5° for a walking speed of 0.89 m/s and reached a maximum RMS error of 15° for a running speed of 2.7 m/s. Despite the deviation of absolute measure, the relative repeatability of the sensing suit’s joint angle measurements were statistically equivalent to that of optical motion capture at all speeds. We anticipate that wearable soft sensing will also have applications beyond wearable robotics, such as in medical diagnostics and in human–computer interaction. [ABSTRACT FROM AUTHOR]