Search

Tropical Storm Bill produced over 400 mm of rainfall in portions of southern Oklahoma from 16 to 20 June 2015, adding to the catastrophic urban and river flooding that occurred throughout the region in the month prior to landfall. The unprecedented excessive precipitation event that occurred across Oklahoma and Texas during May and June 2015 resulted in anomalously high soil moisture and latent heat fluxes over the region, acting to increase the available boundary layer moisture. Tropical Storm Bill progressed inland over the region of anomalous soil moisture and latent heat fluxes, which helped maintain polarimetric radar signatures associated with tropical, warm rain events. Vertical profiles of polarimetric radar variables such as ZH, ZDR, KDP, and ρhv were analyzed in time and space over Texas and Oklahoma. The profiles suggest that Tropical Storm Bill maintained warm rain signatures and collision–coalescence processes as it tracked hundreds of kilometers inland away from the landfall point consistent with tropical cyclone precipitation characteristics. Dual-frequency precipitation radar observations from the NASA GPM DPR were also analyzed post-landfall and showed similar signatures of collision–coalescence while Bill moved over north Texas, southern Oklahoma, eastern Missouri, and western Kentucky. [ABSTRACT FROM AUTHOR]

Soil moisture is a fundamental determinant of plant growth, but soil moisture measurements are rarely assimilated into grassland productivity models, in part because methods of incorporating such data into statistical and mechanistic yield models have not been adequately investigated. Therefore, our objectives were to (a) quantify statistical relationships between in situ soil moisture measurements and biomass yield on grasslands in Oklahoma and (b) develop a simple, mechanistic biomass‐yield model for grasslands capable of assimilating in situ soil moisture data. Soil moisture measurements (as fraction of available water capacity, FAW) explained 60% of the variability in county‐level wild hay yield reported by the National Agricultural Statistics Service (NASS). We next evaluated the performance of mechanistic, evapotranspiration (ET)‐driven grassland productivity models with and without assimilation of measured FAW into the models' water balance routines. Models were calibrated by comparing estimated ET with ET measured using eddy covariance, and calibration proved essential for accurate ET estimates. Models were validated by comparing NASS county‐level hay yields to the modeled yields, which were the product of normalized transpiration estimates (the ratio of transpiration to reference ET) and an empirically derived grassland water productivity (the ratio of accumulated biomass to normalized transpiration) estimate. The mechanistic model produced more accurate estimates of wild‐hay yields with soil moisture data assimilation (Nash–Sutcliffe efficiency [NSE] = 0.55) than without (NSE = 0.10). These results suggest that improved estimates of grassland productivity could be achieved using in situ soil moisture, which could benefit grazing management decisions, wildfire preparedness, and disaster assistance programs. Core Ideas: In situ soil moisture data were used to estimate grassland biomass productivity.Statistical and mechanistic models were assessed as alternative applications of the data.Soil moisture correlated strongly with productivity in a simple statistical model.The mechanistic model was improved after calibration and with soil moisture.Soil moisture data have good potential for grassland productivity forecasting. [ABSTRACT FROM AUTHOR]

Backward trajectories were derived from North American Regional Reanalysis data for 19 253 flash flood reports published by the National Weather Service to determine the along-path contribution of the land surface to the moisture budget for flash flood events in the conterminous United States. The impact of land surface interactions was evaluated seasonally and for six regions: the West Coast, Arizona, the Front Range, Flash Flood Alley, the Missouri Valley, and the Appalachians. Parcels were released from locations that were impacted by flash floods and traced backward in time for 120 h. The boundary layer height was used to determine whether moisture increases occurred within the boundary layer or above it. Moisture increases occurring within the boundary layer were attributed to evapotranspiration from the land surface, and surface properties were recorded from an offline run of the Noah land surface model. In general, moisture increases attributed to the land surface were associated with anomalously high surface latent heat fluxes and anomalously low sensible heat fluxes (resulting in a positive anomaly of evaporative fraction) as well as positive anomalies in top-layer soil moisture. Over the ocean, uptakes were associated with positive anomalies in sea surface temperatures, the magnitude of which varies both regionally and seasonally. Major oceanic surface-based source regions of moisture for flash floods in the United States include the Gulf of Mexico and the Gulf of California, while boundary layer moisture increases in the southern plains are attributable in part to interactions between the land surface and the atmosphere. [ABSTRACT FROM AUTHOR]

Global "hot spots" for land–atmosphere coupling have been identified through various modeling studies—both local and global in scope. One hot spot that is common to many of these analyses is the U.S. southern Great Plains (SGP). In this study, we perform a mesoscale analysis, enabled by the Oklahoma Mesonet, that bridges the spatial and temporal gaps between preceding local and global analyses of coupling. We focus primarily on east–west variations in seasonal coupling in the context of interannual variability over the period spanning 2000–15. Using North American Regional Reanalysis (NARR)-derived standardized anomalies of convective triggering potential (CTP) and the low-level humidity index (HI), we investigate changes in the covariance of soil moisture and the atmospheric low-level thermodynamic profile during seasonal hydrometeorological extremes. Daily CTP and HI z scores, dependent upon climatology at individual NARR grid points, were computed and compared to in situ soil moisture observations at the nearest mesonet station to provide nearly collocated annual composites over dry and wet soils. Extreme dry and wet year CTP and HI z-score distributions are shown to deviate significantly from climatology and therefore may constitute atmospheric precursors to extreme events. The most extreme rainfall years differ from climatology but also from one another, indicating variability in the strength of land–atmosphere coupling during these years. Overall, the covariance between soil moisture and CTP/HI is much greater during drought years, and coupling appears more consistent. For example, propagation of drought during 2011 occurred under antecedent CTP and HI conditions that were identified by this study as being conducive to positive dry feedbacks demonstrating potential utility of this framework in forecasting regional drought propagation. [ABSTRACT FROM AUTHOR]

ABSTRACT: The purpose of this study was to investigate the seasonal to interannual variability of the temporal and spatial distributions of land–atmosphere coupling (LAC) at the mesoscale within the Southern Great Plains (SGP) of the United States. The North American Regional Reanalysis data set from 1979 to 2014 was used to complete this study. To further expand the relationship between soil moisture and precipitation, LAC was examined for the effects of soil moisture variability on latent heat flux (SM‐E) and the impact of latent heat flux variability on precipitation (E‐P). Results revealed that within the SGP there is a temporal and spatial seasonal evolution of the SM‐E relationship and dry boreal summer month (June, July and August, JJA) periods exhibit a stronger E‐P relationship relative to pluvial boreal summer month periods. Further, the variability of coupling was large both within‐season (i.e. JJA) as well as at the interannual scale while the interannual spatial and temporal coherence was such that no specific locations showed consistent coupling within the domain. Thus, the results indicate that while the SGP domain is sensitive to coupling, the location of preferred coupling is likely due to non‐local factors at the mesoscale embedded within synoptic conditions as well as the regional climate. [ABSTRACT FROM AUTHOR]

Observations from the Oklahoma Mesonet and high resolution Weather Research and Forecasting model simulations were used to evaluate the effect that the dry line and large-scale atmospheric patterns had on drought evolution during 2011. Mesonet observations showed that a “dry” and “wet” pattern developed across Oklahoma due to anomalous atmospheric patterns. The location of the dry line varied due to this “dry” and “wet” pattern, with the average dry line location around 1.5° longitude further to the east than climatology. Model simulations were used to further quantify the impact of variable surface conditions on dry line evolution and convective initiation (CI) during April and May 2011. Specifically, soil moisture conditions were altered to depict “wet” and “dry” conditions across the domain by replacing the soil moisture values by each soil category’s porosity or wilting point value. Overall, the strength of the dry line boundary, its position, and subsequent CI were dependent on the modification of soil moisture. The simulations demonstrated that modifying soil moisture impacted the nature of the dry line and showed that soil moisture conditions during the first half of the warm season modified the dry line pattern and influenced the evolution and perpetuation of drought over Oklahoma. [ABSTRACT FROM AUTHOR]

This study proposes a microwave surface emission model for soil moisture retrieval using radiometer data based on today's most widely used physical model, i.e., advanced integral equation model (AIEM). Soil roughness and moisture effects are easily yet accurately decoupled in the proposed model. In the field case study, the total least squares method, instead of the least squares (LS) method, is applied for the first time in soil moisture retrieval to solve the error in variable linear equation set to further reduce the estimation error. Validated by the Soil Moisture Experiment 2003 campaign data in Oklahoma, the root mean square error (RMSE) and R^2 of volumetric soil moisture varies from 1.5% to 4.2% and 0.92 to 0.43 at L/C/X bands and 40/55° incidence angles. Compared with previous studies, the proposed model has several new features: 1) it is location independent since the model is derived through reproducing the behavior of the AIEM; 2) its high fidelity to AIEM significantly improves the accuracy, whereas its linearity makes it easy to invert; and 3) the soil moisture retrieval based on the proposed model requires no prior knowledge of soil roughness in the scenario of the demonstrated case study. The L-band/V-polarization radiometer data yield the best retrieval result with an RMSE of 1.5% and R^2 of 0.92, whereas increasing frequency increases the error because the sensitivity of emissivity to ground soil moisture decreases, and the valid roughness region, i.e., khRMS < 3, of the AIEM narrows. [ABSTRACT FROM PUBLISHER]

Surface soil temperature estimates at approximately 0.05 m depth are needed to retrieve soil moisture from the planned Soil Moisture Active Passive (SMAP) L-band (1.4 GHz) satellite. Numerical weather prediction (NWP) systems as operated by various weather centers produce global estimates of soil temperature. In this study in Situ data collected over the state of Oklahoma are used to assess surface (Soil) temperature from three NV/P systems: (1) the integrated forecast system from the European Center for Medium range Weather Forecasts (ECMWF), (2) the modern-era retrospective analysis for research and applications (MERRA) from the NASA Global Modeling and Assimilation Office, and (3) the global data assimilation system used by the National Center for Environmental Prediction (NCEP). The results are presented by hour of day with specific attention directed to the SMAP early morning overpass time at around 6 AM. local time, and the period of 1 April to 1 October 2009. It was found that the NWP systems estimate the 0.05 m soil temperature at this time of day with an overall root mean square error of 1.9 to 2.0 K. It is shown that this error can be reduced to 1.6 to 1.8 K when differences between the modeling and measurement depth are accounted for by synchronizing each NWP set to match the mean phase of the in situ data and adjusting the amplitude in accordance with heat flow principles. These results indicate that with little calibration all products meet the SMAP error budget criteria over Oklahoma. [ABSTRACT FROM AUTHOR]

The advanced synthetic aperture radar (ASAR) on-board of the satellite ENVISAT can be operated in global monitoring (GM) mode. ASAR GM mode has delivered the first global multiyear C-band backscatter data set in HH polarization at a spatial resolution of 1 km. This paper investigates if ASAR GM can be used for retrieving soil moisture using a change detection approach over large regions. A method previously developed for the European Remote Sensing (ERS) scatterometer is adapted for use with ASAR GM and tested over Oklahoma, USA. The ASAR-GM-derived relative soil moisture index is compared to 50-km ERS soil moisture data and pointlike in situ measurements from the Oklahoma MESONET. Even though the scale gap from ASAR GM to the in situ measurements is less pronounced than in the case of the ERS scatterometer, the correlation for ASAR against the in situ measurements is, in general, somewhat weaker than for the ERS scatterometer. The analysis suggests that this is mainly due to the much higher noise level of ASAR GM compared to the ERS scatterometer. Therefore, some spatial averaging to 3-10 km is recommended to reduce the noise of the ASAR GM soil moisture images. Nevertheless, the study demonstrates that ASAR GM allows resolving spatial details in the soil moisture patterns not observable in the ERS scatterometer measurements while still retaining the basic capability of the ERS scatterometer to capture temporal trends over large areas. [ABSTRACT FROM AUTHOR]

Soil moisture is an important component in many hydrologic and land–atmosphere interactions. Understanding the spatial and temporal nature of soil moisture on the mesoscale is vital to determine the influence that land surface processes have on the atmosphere. Recognizing the need for improved in situ soil moisture measurements, the Oklahoma Mesonet, an automated network of 116 remote meteorological stations across Oklahoma, installed Campbell Scientific 229-L devices to measure soil moisture conditions. Herein, background information on the soil moisture measurements, the technical design of the soil moisture network embedded within the Oklahoma Mesonet, and the quality assurance (QA) techniques applied to the observations are provided. This project also demonstrated the importance of operational QA regarding the data collected, whereby the percentage of observations that passed the QA procedures increased significantly once daily QA was applied. [ABSTRACT FROM AUTHOR]

This paper describes important characteristics of an uncoupled high-resolution land data assimilation system (HRLDAS) and presents a systematic evaluation of 18-month-long HRLDAS numerical experiments, conducted in two nested domains (with 12- and 4-km grid spacing) for the period from 1 January 2001 to 30 June 2002, in the context of the International H2O Project (IHOP_2002). HRLDAS was developed at the National Center for Atmospheric Research (NCAR) to initialize land-state variables of the coupled Weather Research and Forecasting (WRF)–land surface model (LSM) for high-resolution applications. Both uncoupled HRDLAS and coupled WRF are executed on the same grid, sharing the same LSM, land use, soil texture, terrain height, time-varying vegetation fields, and LSM parameters to ensure the same soil moisture climatological description between the two modeling systems so that HRLDAS soil state variables can be used to initialize WRF–LSM without conversion and interpolation. If HRLDAS is initialized with soil conditions previously spun up from other models, it requires roughly 8–10 months for HRLDAS to reach quasi equilibrium and is highly dependent on soil texture. However, the HRLDAS surface heat fluxes can reach quasi-equilibrium state within 3 months for most soil texture categories. Atmospheric forcing conditions used to drive HRLDAS were evaluated against Oklahoma Mesonet data, and the response of HRLDAS to typical errors in each atmospheric forcing variable was examined. HRLDAS-simulated finescale (4 km) soil moisture, temperature, and surface heat fluxes agreed well with the Oklahoma Mesonet and IHOP_2002 field data. One case study shows high correlation between HRLDAS evaporation and the low-level water vapor field derived from radar analysis. [ABSTRACT FROM AUTHOR]

Flash droughts are characterized by a period of rapid intensification over sub-seasonal time scales that culminates in the rapid emergence of new or worsening drought impacts. This study presents a new flash drought intensity index (FDII) that accounts for both the unusually rapid rate of drought intensification and its resultant severity. The FDII framework advances our ability to characterize flash drought because it provides a more complete measure of flash drought intensity than existing classification methods that only consider the rate of intensification. The FDII is computed using two terms measuring the maximum rate of intensification (FD_INT) and average drought severity (DRO_SEV). A climatological analysis using soil moisture data from the Noah land surface model from 1979–2017 revealed large regional and interannual variability in the spatial extent and intensity of soil moisture flash drought across the US. Overall, DRO_SEV is slightly larger over the western and central US where droughts tend to last longer and FD_INT is ~75% larger across the eastern US where soil moisture variability is greater. Comparison of the FD_INT and DRO_SEV terms showed that they are strongly correlated (r = 0.82 to 0.90) at regional scales, which indicates that the subsequent drought severity is closely related to the magnitude of the rapid intensification preceding it. Analysis of the 2012 US flash drought showed that the FDII depiction of severe drought conditions aligned more closely with regions containing poor crop conditions and large yield losses than that captured by the intensification rate component (FD_INT) alone. [ABSTRACT FROM AUTHOR]

One of the benefits of training a process-based, land surface model is the capacity to use it in ungauged sites as a complement to standard weather stations for predicting energy fluxes, evapotranspiration, and surface and root-zone soil temperature and moisture. In this study, dynamic (i.e., time-evolving) vegetation parameters were derived from remotely sensed Moderate Resolution Imaging Spectroradiometer (MODIS) imagery and coupled with a physics-based land surface model (tin-based Real-time Integrated Basin Simulator (tRIBS)) at four eddy covariance (EC) sites in south-central U.S. to test the predictability of micro-meteorological, soil-related, and energy flux-related variables. One cropland and one grassland EC site in northern Oklahoma, USA, were used to tune the model with respect to energy fluxes, soil temperature, and moisture. Calibrated model parameters, mostly related to the soil, were then transferred to two other EC sites in Oklahoma with similar soil and vegetation types. New dynamic vegetation parameter time series were updated according to MODIS imagery at each site. Overall, the tRIBS model captured both seasonal and diurnal cycles of the energy partitioning and soil temperatures across all four stations, as indicated by the model assessment metrics, although large uncertainties appeared in the prediction of ground heat flux, surface, and root-zone soil moisture at some stations. The transferability of previously calibrated model parameters and the use of MODIS to derive dynamic vegetation parameters enabled rapid yet reasonable predictions. The model was proven to be a convenient complement to standard weather stations particularly for sites where eddy covariance or similar equipment is not available. [ABSTRACT FROM AUTHOR]

In situ soil moisture monitoring networks are critical to the development of soil moisture remote sensing missions as well as agricultural and environmental management, weather forecasting, and many other endeavors. These in situ networks utilize a variety of sensors and installation practices, which confounds the development of a unified reference database for satellite calibration and validation programs. As part of the Soil Moisture Active Passive Mission, the Marena, Oklahoma, In Situ Sensor Testbed (SMAP-MOISST) was initiated to perform inter-comparisons and study sensor limitations. Soil moisture sensors that are deployed in major monitoring networks were included in the study, along with new and emerging technologies, such as the Cosmic Ray Soil Moisture Observing System (COSMOS), passive/active distributed temperature sensing (DTS), and global positioning system reflectometers (GPSR). Four profile stations were installed in May of 2010, and soil moisture was monitored to a depth of 1 m on an hourly basis. The four stations were distributed within a circular domain of approximately 600 m diameter, adequate to encompass the sensing range of COSMOS. The sensors included in the base station configuration included the Stevens Water Hydra Probe, Campbell Scientific 616 and 229, Decagon EC-TM, Delta-T Theta Probe, Acclima, and Sentek EnviroSMART capacitance system. In addition, the Pico TRIME system and additional time-domain reflectometry (TDR) systems were deployed when available. It was necessary to apply site-specific calibration to most sensors to reach an RMSE below 0.04 m³ m-3. For most sensor types, a single near surface sensor could be scaled to represent the areal-average of a field domain by simple linear regression, resulting in RMSE values around 0.03 m³ m-3. [ABSTRACT FROM AUTHOR]