Search

Abstract: We conduct a novel comprehensive investigation that seeks to prove the connection between spatial scales and timescales in surface soil moisture (SM) within the satellite footprint (~50 km). Modeled and measured point series at Yanco and Little Washita in situ networks are first decomposed into anomalies at timescales ranging from 0.5 to 128 days, using wavelet transforms. Then, their degree of spatial representativeness is evaluated on a per‐timescale basis by comparison to large spatial scale data sets (the in situ spatial average, SMOS, AMSR2, and ECMWF). Four methods are used for this: temporal stability analysis (TStab), triple collocation (TC), percentage of correlated areas (CArea), and a new proposed approach that uses wavelet‐based correlations (WCor). We found that the mean of the spatial representativeness values tends to increase with the timescale but so does their dispersion. Locations exhibit poor spatial representativeness at scales below 4 days, while either very good or poor representativeness at seasonal scales. Regarding the methods, TStab cannot be applied to the anomaly series due to their multiple zero‐crossings, and TC is suitable for week and month scales but not for other scales where data set cross‐correlations are found low. In contrast, WCor and CArea give consistent results at all timescales. WCor is less sensitive to the spatial sampling density, so it is a robust method that can be applied to sparse networks (one station per footprint). These results are promising to improve the validation and downscaling of satellite SM series and the optimization of SM networks. [ABSTRACT FROM AUTHOR]

Present soil moisture and ocean salinity maps retrieved by remote sensing are characterized by a coarse spatial resolution. Hydrological, meteorological and climatological applications would benefit greatly from a better spatial resolution. Owing to the dimensions of the satellite structure and to the degradation of the instrument's radiometric sensitivity, such improvement cannot be achieved with classical interferometry. Then, in order to achieve this goal an original concept for passive interferometric measurements is described. This concept should allow to achieve a much finer spatial resolution, which can be further improved with the application of disaggregation methods. The results will then allow the integration of global soil moisture maps into hydrological models, a better management of water resources at small scales and an improvement in spatial precision for various applications. [ABSTRACT FROM AUTHOR]

Following the launch of the European Space Agency's Soil Moisture and Ocean Salinity (SMOS) mission on 2 November 2009, SMOS soil moisture products need to be rigorously validated at the satellite's approximately 45 km scale and disaggregation techniques for producing maps with finer resolutions tested. The Australian Airborne Cal/val Experiments for SMOS (AACES) provide the basis for one of the most comprehensive assessments of SMOS data worldwide by covering a range of topographic, climatic and land surface variability within an approximately 500x100 km² study area, located in South-East Australia. The AACES calibration and validation activities consisted of two extensive field experiments which were undertaken across the Murrumbidgee River catchment during the Australian summer and winter season of 2010, respectively. The datasets include airborne L-band brightness temperature, thermal infrared and multi-spectral observations at 1 km resolution, as well as extensive ground measurements of near-surface soil moisture and ancillary data, such as soil temperature, soil texture, surface roughness, vegetation water content, dew amount, leaf area index and spectral characteristics of the vegetation. This paper explains the design and data collection strategy of the airborne and ground component of the two AACES campaigns and presents a preliminary analysis of the field measurements including the application and performance of the SMOS core retrieval model on the diverse land surface conditions captured by the experiments. The data described in this paper are publicly available from the website: http://www.moisturemap.monash.edu.au/aaces. [ABSTRACT FROM AUTHOR]

The Soil Moisture and Ocean Salinity (SMOS) mission is European Space Agency (ESA's) second Earth Explorer Opportunity mission, launched in November 2009. It is a joint program between ESA Centre National d'Etudes Spatiales (CNES) and Centro para el Desarrollo Tecnologico Industrial. SMOS carries a single payload, an L-Band 2-D interferometric radiometer in the 1400-1427 MHz protected band. This wavelength penetrates well through the atmosphere, and hence the instrument probes the earth surface emissivity. Surface emissivity can then be related to the moisture content in the first few centimeters of soil, and, after some surface roughness and temperature corrections, to the sea surface salinity over ocean. The goal of the level 2 algorithm is thus to deliver global soil moisture (SM) maps with a desired accuracy of 0.04 m3/m3. To reach this goal, a retrieval algorithm was developed and implemented in the ground segment which processes level 1 to level 2 data. Level 1 consists mainly of angular brightness temperatures (TB), while level 2 consists of geophysical products in swath mode, i.e., as acquired by the sensor during a half orbit from pole to pole. In this context, a group of institutes prepared the SMOS algorithm theoretical basis documents to be used to produce the operational algorithm. The principle of the SM retrieval algorithm is based on an iterative approach which aims at minimizing a cost function. The main component of the cost function is given by the sum of the squared weighted differences between measured and modeled TB data, for a variety of incidence angles. The algorithm finds the best set of the parameters, e.g., SM and vegetation characteristics, which drive the direct TB model and minimizes the cost function. The end user Level 2 SM product contains SM, vegetation opacity, and estimated dielectric constant of any surface, TB computed at 42.5°, flags and quality indices, and other parameters of interest. This paper gives an overview of the algorithm, discusses the caveats, and provides a glimpse of the Cal Val exercises. [ABSTRACT FROM AUTHOR]

The Soil Moisture and Ocean Salinity (SMOS) satellite has opened the era of soil moisture products from passive L-band observations. In this paper, validation of SMOS products over continental U.S. is done by using the Soil Climate Analysis Network (SCAN)/SNOwpack TELemetry (SNOTEL) soil moisture monitoring stations. The SMOS operational products and the SMOS reprocessing products are both used and compared over year 2010. First, a direct node-to-site comparison is performed by taking advantage of the oversampling of the SMOS product grid. The comparison is performed over several adjacent nodes to site, and several representative couples of site-node are identified. The impact of forest fraction is shown through the analysis of different cases across the U.S. Also, the impact of water fraction is shown through two examples in Florida and in Utah close to Great Salt Lake. A radiometric aggregation approach based on the antenna footprint and spatial description is used. A global comparison of the SCAN/SNOTEL versus SMOS is made. Statistics show an underestimation of the soil moisture from SMOS compared to the SCAN/SNOTEL local measurements. The results suggest that SMOS meets the mission requirement of 0.04 m3/m3 over specific nominal cases, but differences are observed over many sites and need to be addressed. [ABSTRACT FROM AUTHOR]

The European Space Agency's Soil Moisture and Ocean Salinity (SMOS) mission was launched on the 2nd of November 2009. The first six months after launch, the so-called commissioning phase, were dedicated to test the functionalities of the spacecraft, the instrument, and the ground segment including the data processors. This phase was successfully completed in May 2010, and SMOS has since been in the routine operations phase and providing data products to the science community for over a year. The performance of the instrument has been within specifications. A parallel processing chain has been providing brightness temperatures in near-real time to operational centers, e.g., the European Centre for Medium-Range Weather Forecasts. Data quality has been within specifications; however, radio-frequency interference (RFI) has been detected over large parts of Europe, China, Southern Asia, and the Middle East. Detecting and flagging contaminated observations remains a challenge as well as contacting national authorities to localize and eliminate RFI sources emitting in the protected band. The generation of Level 2 soil moisture and ocean salinity data is an ongoing activity with continuously improved processors. This article will summarize the mission status after one year of operations and present selected first results. [ABSTRACT FROM AUTHOR]

The present paper analyzes the effects of roughness on the surface emission at L-band based on observations acquired during a long-term experiment. At the Surface Monitoring of the Soil Reservoir Experiment site near Toulouse, France, a bare soil was plowed and monitored over more than a year by means of an L-band radiometer, profile soil moisture and temperature sensors, and a local weather station, accompanied by 12 roughness campaigns. The aims of this paper are the following: 1) to present this unique database and 2) to use this data set to investigate the semiempirical parameters for the roughness in L-band Microwave Emission of the Biosphere, which is the forward model used in the Soil Moisture and Ocean Salinity soil moisture retrieval algorithm. In particular, we studied the link between these semiempirical parameters and the soil roughness characteristics expressed in terms of standard deviation of surface height (σ) and the correlation length (LC). The data set verifies that roughness effects decrease the sensitivity of surface emission to soil moisture, an effect which is most pronounced at high incidence angles and soil moisture and at horizontal polarization. Contradictory to previous studies, the semiempirical parameter Qr was not found to be equal to 0 for rough conditions. A linear relationship between the semiempirical parameters N and σ was established, while NH and NV appeared to be lower for a rough (NH ~ 0.59 and NV ~ -0.3) than for a quasi-smooth surface. This paper reveals the complexity of roughness effects and demonstrates the great value of a sound long-term data set of rough L-band surface emissions to improve our understanding on the matter. [ABSTRACT FROM AUTHOR]

Radiative properties at 1.4 GHz of vine vegetation are investigated by measuring brightness temperatures with the ETH L-band Radiometer II (ELBARA II) operated on a tower at the Mediterranean Ecosystem L-band Characterisation Experiment III (MELBEX III) field site in Spain. To this aim, experiments with and without a reflecting foil placed under the vines were performed for the vegetation winter and summer states, respectively, to provide prevailingly information on vegetation transmissivities. The resulting parameters, which can be considered as “ground truth” for the MELBEX III vineyard, were retrieved from brightness temperature at horizontal and vertical polarization measured at observation angles between 30° and 60°. These MELBEX III “ground-truth” values are representative for the Mediterranean Soil Moisture and Ocean Salinity (SMOS) Valencia Anchor Station (VAS) and therefore valuable for the corresponding calibration and validation activities over the VAS site. Likewise, quantifying the uncertainties of the measured brightness temperatures was also important, particularly as several equivalent ELBARA II instruments are currently operative in ongoing SMOS-related field campaigns. [ABSTRACT FROM AUTHOR]

The European Space Agency's Soil Moisture and Ocean Salinity (SMOS) mission is perturbed by radio frequency interferences (RFIs) that jeopardize part of its scientific retrieval in certain areas of the world, particularly over continental areas in Europe, Southern Asia, and the Middle East. Areas affected by RFI might experience data loss or underestimation of soil moisture and ocean salinity retrieval values. To alleviate this situation, the SMOS team has put strategies in place that, one year after launch, have already improved the RFI situation in Europe where half of the sources have been successfully localized and switched off. [ABSTRACT FROM AUTHOR]

Disaggregation based on Physical And Theoretical scale Change (DisPATCh) is an algorithm dedicated to the disaggregation of soil moisture observations using high-resolution soil temperature data. DisPATCh converts soil temperature fields into soil moisture fields given a semi-empirical soil evaporative efficiency model and a first-order Taylor series expansion around the field-mean soil moisture. In this study, the disaggregation approach is applied to Soil Moisture and Ocean Salinity (SMOS) satellite data over the 500 km by 100 km Australian Airborne Calibration/validation Experiments for SMOS (AACES) area. The 40-km resolution SMOS surface soil moisture pixels are disaggregated at 1-km resolution using the soil skin temperature derived from Moderate Resolution Imaging Spectroradiometer (MODIS) data, and subsequently compared with the AACES intensive ground measurements aggregated at 1-km resolution. The objective is to test DisPATCh under various surface and atmospheric conditions. It is found that the accuracy of disaggregation products varies greatly according to season: while the correlation coefficient between disaggregated and in situ soil moisture is about 0.7 during the summer AACES, it is approximately zero during the winter AACES, consistent with a weaker coupling between evaporation and surface soil moisture in temperate than in semi-arid climate. Moreover, during the summer AACES, the correlation coefficient between disaggregated and in situ soil moisture is increased from 0.70 to 0.85, by separating the 1-km pixels where MODIS temperature is mainly controlled by soil evaporation, from those where MODIS temperature is controlled by both soil evaporation and vegetation transpiration. It is also found that the 5-km resolution atmospheric correction of the official MODIS temperature data has a significant impact on DisPATCh output. An alternative atmospheric correction at 40-km resolution increases the correlation coefficient between disaggregated and in situ soil moisture from 0.72 to 0.82 during the summer AACES. Results indicate that DisPATCh has a strong potential in low-vegetated semi-arid areas where it can be used as a tool to evaluate SMOS data (by reducing the mismatch in spatial extent between SMOS observations and localized in situ measurements), and as a further step, to derive a 1-km resolution soil moisture product adapted for large-scale hydrological studies. [ABSTRACT FROM AUTHOR]

The Soil Moisture and Ocean Salinity (SMOS) mission delivers global surface soil moisture fields at high temporal resolution which is of major relevance for water management and climate predictions. Between April 26 and May 9, 2010, an airborne campaign with the L-band radiometer EMIRAD-2 was carried out within one SMOS pixel (44 × 44 km) in the Skjern River Catchment, Denmark. Concurrently, ground sampling was conducted within three 2 × 2 km patches (EMIRAD footprint size) of differing land cover. By means of this data set, the objective of this study is to present the validation of SMOS L1C brightness temperatures TB of the selected node. Data is stepwise compared from point via EMIRAD to SMOS scale. From ground soil moisture samples, TB's are pointwise estimated through the L-band microwave emission of the biosphere model using land cover specific model settings. These TB's are patchwise averaged and compared with EMIRAD TB's. A simple uncertainty assessment by means of a set of model runs with the most influencing parameters varied within a most likely interval results in a considerable spread of TB's (5-20 K). However, for each land cover class, a combination of parameters could be selected to bring modeled and EMIRAD data in good agreement. Thereby, replacing the Dobson dielectric mixing model with the Mironov model decreases the overall RMSE from 11.5 K to 3.8 K. Similarly, EMIRAD data averaged at SMOS scale and corresponding SMOS TB 's show good accordance on the single day where comparison is not prevented by strong radio-frequency interference (RFI) (May 2, avg. RMSE = 9.7 K). While the advantages of solid data sets of high spatial coverage and density throughout spatial scales for SMOS validation could be clearly demonstrated, small temporal variability in soil moisture conditions and RFI contamination throughout the campaign limited the extent of the validation work. Further attempts over longer time frames are planned by means of soil moisture network data as well as studies on the impacts of organic layers under natural vegetation and higher open water fractions at surrounding grid nodes. [ABSTRACT FROM AUTHOR]

Estimation of soil moisture at large scale has been performed using several satellite-based passive microwave sensors and a variety of retrieval methods over the past two decades. The most recent source of soil moisture is the European Space Agency Soil Moisture and Ocean Salinity (SMOS) mission. A thorough validation must be conducted to insure product quality that will, in turn, support the widespread utilization of the data. This is especially important since SMOS utilizes a new sensor technology and is the first passive L-band system in routine operation. In this paper, we contribute to the validation of SMOS using a set of four in situ soil moisture networks located in the U.S. These ground-based observations are combined with retrievals based on another satellite sensor, the Advanced Microwave Scanning Radiometer (AMSR-E). The watershed sites are highly reliable and address scaling with replicate sampling. Results of the validation analysis indicate that the SMOS soil moisture estimates are approaching the level of performance anticipated, based on comparisons with the in situ data and AMSR-E retrievals. The overall root-mean-square error of the SMOS soil moisture estimates is 0.043 m3/m3 for the watershed networks (ascending). There are bias issues at some sites that need to be addressed, as well as some outlier responses. Additional statistical metrics were also considered. Analyses indicated that active or recent rainfall can contribute to interpretation problems when assessing algorithm performance, which is related to the contributing depth of the satellite sensor. Using a precipitation flag can improve the performance. An investigation of the vegetation optical depth (tau) retrievals provided by the SMOS algorithm indicated that, for the watershed sites, these are not a reliable source of information about the vegetation canopy. The SMOS algorithms will continue to be refined as feedback from validation is evaluated, and it is expected that the SMOS estimates will improve. [ABSTRACT FROM AUTHOR]