Search

This paper presents the design of a novel high-temperature solar assisted triple-pressure level combined cycle power plant. The system includes innovative high-temperature flat plate evacuated solar thermal collectors, a double stage lithium bromide/water absorption chiller, pumps, heat exchangers, storage tanks, mixers, diverters, controllers and a triple-pressure combined cycle power plant. This novel layout uses high-vacuum non-concentrating flat plate solar thermal collectors driving a double effect absorption chiller, leading to an overall high coefficient of performance for the solar cooling section. The provided cooling energy is used to cool gas turbine inlet air to enhance system efficiency and electrical capacity. This effect is mainly performed during central hours of the day when the conventional gas-fired combined cycles dramatically suffer for efficiency and capacity reduction, as a consequence of the corresponding increase of external air temperature. Such increase is related to the higher availability of solar radiation. This technology may be a viable solution, especially for hot and dry areas, in terms of primary energy savings and increased revenues. This prototypal system was numerically analysed for a combined cycle with a rated electrical power of 99 MWe and an electrical efficiency of 56%, developing a dynamic simulation model and detailed thermo-economic optimizations. Special attention is also paid to the design of novel control strategies aiming at maximizing the solar cooling effect. The results of the dynamic simulations show a very high average thermal efficiency of the solar collectors, equal to 34%. Implications of the performed work allowed an increase of the power output up to 5.5% and a satisfactory payback period equal to 10.7 years. [ABSTRACT FROM AUTHOR]

This paper presents the design of a novel Solar Assisted Combined Cycle power plant. The system includes a solar loop equipped with a double stage absorption chiller driven by high-temperature high-vacuum non-concentrating flat-plate solar thermal collectors. The solar loop is coupled to a single-pressure Combined Cycle power plant. The cooling energy produced by the absorption chiller is used to cool gas turbine inlet air, aiming at enhancing system efficiency and electrical capacity. This Solar Assisted Combined Cycle arrangement is analysed through a dynamic system simulation and a thermoeconomic analysis is also performed aiming at determining the optimal set of design and operating parameters. The paper has the objective to prove the technical, energetic and economic feasibility of this technology, especially for hot and dry areas, with respect to other alternative air cooling configurations. In addition, solar collectors operating temperatures are high enough to drive a two stage absorption chiller, showing a Coefficient of Performance roughly two times higher than the one of a conventional single stage absorption chiller. This original configuration was numerically analysed in TRNSYS environment, developing a suitable dynamic simulation model in order to predict system performances. Suitable dynamic models are implemented for all the components included in the system. Special attention is also paid to the design of novel control strategies aiming at maximizing the utilization of solar energy for cooling purposes. In particular, a special control strategy managing cooling water flow is implemented in order to limit as much as possible water condensation within the cooling coil. The simulation also includes a detailed thermoeconomic model which accurately evaluates system capital and operating costs as a function of design and operating parameters. The simulations results show that a very high thermal efficiency of solar collectors, on average equal to 34%, is achieved. Results from the economic point of view were also satisfactory. In fact, the pay back period was about 8 years in the best case. Finally, in order to analyse the effects of the variation of the main design parameters, a parametric analysis is also presented. Such analysis shows that high solar radiation and low ambient humidity are crucial in order to achieve acceptable economic profitability indexes. [ABSTRACT FROM AUTHOR]

This paper presents a detailed exergetic analysis of a novel high-temperature Solar Assisted Combined Cycle (SACC) power plant. The system includes a solar field consisting of innovative high-temperature flat plate evacuated solar thermal collectors, a double stage LiBr-H2O absorption chiller, pumps, heat exchangers, storage tanks, mixers, diverters, controllers and a simple single-pressure Combined Cycle (CC) power plant. Here, a high temperature solar cooling system is coupled with a conventional combined cycle, in order to pre-cool gas turbine inlet air in order to enhance system efficiency and electrical capacity. In this paper, the system is analyzed from an exergetic point of view, on the basis of an energy-economic model presented in a recent work, where the obtained main results show that SACC exhibits a higher electrical production and efficiency with respect to the conventional CC. The system performance is evaluated by a dynamic simulation, where detailed simulation models are implemented for all the components included in the system. In addition, for all the components and for the system as whole, energy and exergy balances are implemented in order to calculate the magnitude of the irreversibilities within the system. In fact, exergy analysis is used in order to assess: exergy destructions and exergetic efficiencies. Such parameters are used in order to evaluate the magnitude of the irreversibilities in the system and to identify the sources of such irreversibilities. Exergetic efficiencies and exergy destructions are dynamically calculated for the 1-year operation of the system. Similarly, exergetic results are also integrated on weekly and yearly bases in order to evaluate the corresponding irreversibilities. The results showed that the components of the Joule cycle (combustor, turbine and compressor) are the major sources of irreversibilities. System overall exergetic efficiency was around 48%. Average weekly solar collector exergetic efficiency ranged from 6.5% to 14.5%, significantly increasing during the summer season. Conversely, absorption chiller exergy efficiency varies from 7.7% to 20.2%, being higher during the winter season. Combustor exergy efficiency is stably close to 68%, whereas the exergy efficiencies of the remaining components are higher than 80%. [ABSTRACT FROM AUTHOR]