Search

The structure of molecular aggregates is crucial for charge transport and photovoltaic performance in organic solar cells (OSCs). Herein, the intermolecular interactions and aggregated structures of nonfused‐ring electron acceptors (NFREAs) are precisely regulated through a halogen transposition strategy, resulting in a noteworthy transformation from a 2D‐layered structure to a 3D‐interconnected packing network. Based on the 3D electron transport pathway, the binary and ternary devices deliver outstanding power conversion efficiencies (PCEs) of 17.46 % and 18.24 %, respectively, marking the highest value for NFREA‐based OSCs. [ABSTRACT FROM AUTHOR]

In the development of high‐performance organic solar cells (OSCs), the self‐organization of organic semiconductors plays a crucial role. This study focuses on the precisely manipulation of molecular assemble via tuning alkyl side‐chain topology in a series of low‐cost nonfused‐ring electron acceptors (NFREAs). Among the three NFREAs investigated, DPA‐4, which possesses an asymmetric alkyl side‐chain length, exhibits a tight packing in the crystal and high crystallinity in the film, contributing to improved electron mobility and favorable film morphology for DPA‐4. As a result, the OSC device based on DPA‐4 achieves an excellent power conversion efficiency of 16.67 %, ranking among the highest efficiencies for NFREA‐based OSCs. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: By employing the asymmetric end‐group engineering, an asymmetric nonfused‐ring electron acceptor (NFREA) was designed and synthesized. Compared with the symmetric analogs (NoCA‐17 and NoCA‐18), NoCA‐19 possesses broader light absorption range, more coplanar π‐conjugated backbone, and appropriate crystallinity according to the experimental and theoretical results. The organic solar cells based on J52:NoCA‐19 exhibited a power conversion efficiency as high as 12.26%, which is much higher than those of J52:NoCA‐17 (9.50%) and J52:NoCA‐18 (11.77%), mainly due to more efficient exciton dissociation, better and balanced charge mobility, suppressed recombination loss, shorter charge extraction time, longer charge carrier lifetimes, and more favorable blend film morphology. These findings demonstrate the great potential of asymmetric end‐group engineering in exploring low‐cost and high‐performance NFREAs. [ABSTRACT FROM AUTHOR]

Organic solar cells (OSCs) have attracted extensive attention from both academia and industry in recent years due to their remarkable improvement in power conversion efficiency (PCE). However, the Golden Triangle (the balance of efficiency‐stability‐cost) required for large‐scale industrialization of OSCs still remains a great challenge. Here, a new nonfused‐ring electron acceptor (NFREA) BF and its polymerized counterpart PBF were designed and synthesized, and their photovoltaic performance, storage stability and material cost were systematically investigated. When blended with a widely‐used polymer donor PBDB‐T, the PBF‐based all‐polymer solar cell (all‐PSC) displayed a record high PCE of 12.61% for polymerized NFREAs (PNFREAs) with an excellent stability (95.2% of initial PCE after 800 h storage), superior to the BF counterpart. Impressively, PBF‐based all‐PSC possesses the highest industrial figure‐of‐merit (i‐FOM) value of 0.309 based on an efficiency‐stability‐cost evaluation, in comparison to several representative OSC systems (such as PM6:Y6 and PBDB‐T:PZ1). This work provides an insight into the balance of efficiency, stability, and cost, and also indicates that the PNFREAs are promising materials toward the commercial application of OSCs. [ABSTRACT FROM AUTHOR]

Organic solar cells (OSCs) have attracted wide research attention in the past decades. Very recently, oligomerized fused‐ring electron acceptors (OFREAs) have emerged as a promising alternative to small‐molecular/polymeric acceptor‐based OSCs due to their unique advantages such as well‐defined structures, batch reproducibility, good film formation, low diffusion coefficient, and excellent stability. So far, rapid advances have been made in the development of OFREAs consisting of directly/rigidly/flexibly linked oligomers and fused ones. In this Minireview, we systematically summarized the recent research progress of OFREAs, including structural diversity, synthesis approach, molecular conformation and packing, and long‐term stability. Finally, we conclude with future perspectives on the challenges to be addressed and potential research directions. We believe that this Minireview will encourage the development of novel OFREAs for OSC applications. [ABSTRACT FROM AUTHOR]

Comprehensive Summary: By employing thiazole and 4‐chlorothiazole as the A′ units, two A‐D‐A′‐D‐A type nonfused‐ring electron acceptors (NFREAs) Tz‐H and Tz‐Cl were designed and synthesized. Replacing thiazole in Tz‐H with 4‐chlorothiazole can not only remarkably shorten the synthetic route through C—H direct arylation but also enhance molecular planarity with the simultaneous incorporation of S···N and S···Cl noncovalently conformational locks (NoCLs). The photovoltaic devices based on PM6:Tz‐Cl exhibited a power conversion efficiency as high as 11.10%, much higher than that of PM6:Tz‐H (6.41%), mainly due to more efficient exciton dissociation, better and more balanced carrier mobility, less charge recombination, and more favorable morphology. These findings demonstrate the great potential of NoCLs in achieving low‐cost and high‐performance NFREAs. [ABSTRACT FROM AUTHOR]

The large energy loss (Eloss) is one of the main obstacles to further improve the photovoltaic performance of organic solar cells (OSCs), which is closely related to the charge transfer (CT) state. Herein, ternary donor alloy strategy is used to precisely tune the energy of CT state (ECT) and thus the Eloss for boosting the efficiency of OSCs. The elevated ECT in the ternary OSCs reduce the energy loss for charge generation (ΔECT), and promote the hybridization between localized excitation state and CT state to reduce the nonradiative energy loss (ΔEnonrad). Together with the optimal morphology, the ternary OSCs afford an impressive power conversion efficiency of 19.22% with a significantly improved open‐circuit voltage (Voc) of 0.910 V without sacrificing short‐cicuit density (Jsc) and fill factor (FF) in comparison to the binary ones. This contribution reveals that precisely tuning the ECT via donor alloy strategy is an efficient way to minimize Eloss and improve the photovoltaic performance of OSCs. [ABSTRACT FROM AUTHOR]

The power conversion efficiencies (PCEs) of organic solar cells (OSCs) have surpassed 19% thanks to the innovation of polymer donors and molecular acceptors. However, the batch‐to‐batch variations in polymer materials are detrimental to the reproducibility of the device performance. In comparison, small‐molecule donors (SMDs) possess some unique advantages, such as well‐defined molecular weights, easy purification, and excellent batch‐to‐batch repeatability. Herein, a pair of regioisomeric SMDs (BT‐O1 and BT‐O2) has been synthesized with alkoxy groups as S···O noncovalently conformational locks (NoCLs) at the inner and outer position, respectively. Theoretical and experimental results reveal that the regioisomeric effect has a significant influence on the light‐harvest ability, energy levels, molecular geometries, internal reorganization energy, and packing behaviors for the two SMDs. As a result, BT‐O2‐based binary device shows an impressive PCE of 13.99%, much higher than that of BT‐O1 based one (4.07%), due to the better‐aligned energy level, more balanced charge transport, less charge recombination, lower energy loss, and more favorable phase separation. Furthermore, the fullerene derivative PC71BM is introduced into BT‐O2:H3 as the third component to achieve a notable PCE of 15.34% (certified 14.6%). Overall, this work reveals that NoCLs is a promising strategy to achieve high‐performance SMDs for all‐small‐molecule OSCs. [ABSTRACT FROM AUTHOR]

The rapid advance of fused‐ring electron acceptors (FREAs) has greatly promoted the leap‐forward development of organic solar cells (OSCs). However, the synthetic complexity of FREAs may be detrimental for future commercial applications. Recently, nonfused‐ring electron acceptors (NREAs) have been developed to be a promising candidate to maintain a rational balance between cost and performance, of which the cores are composed of simple fused rings (NREAs‐I) or nonfused rings (NREAs‐II). Moreover, "noncovalently conformational locks", are used as an effective strategy to enhance the rigidity and planarity of NREAs and improve device performance. Herein, a novel series of NREAs‐II (PhO4T‐1, PhO4T‐2, and PhO4T‐3) is constructed as a valuable platform for exploring the impact of the end group engineering on optoelectronic properties, intermolecular packing behaviors, and device performance. As a result, a high power conversion efficiency of 13.76% is achieved for PhO4T‐3 based OSCs, which is much higher than those of the PhO4T‐1 and PhO4T‐2‐based devices. Compared with several representative FREAs, PhO4T‐3 possesses the highest figure‐of‐merit value of 133.45 based on a cost‐efficiency evaluation. This work demonstrates that the simple‐structured NREAs‐II are promising candidates for low‐cost and high‐performance OSCs. [ABSTRACT FROM AUTHOR]

This article discusses the challenge of industrializing organic solar cells and the need to balance efficiency, stability, and cost. The authors present a polymer acceptor called PBF, which was created using a polymerized nonfused-ring electron acceptor strategy. This polymer acceptor achieved a high efficiency of 12.61%, excellent stability, and low cost, making it a promising option for industrial applications. The authors compare the performance of PBF to other reputable systems and highlight its superior figure-of-merit. [Extracted from the article]

Comprehensive Summary: By employing thiazole and 4‐chlorothiazole as the A′ units, two A‐D‐A′‐D‐A type nonfused‐ring electron acceptors (NFREAs) Tz‐H and Tz‐Cl were designed and synthesized. Replacing thiazole in Tz‐H with 4‐chlorothiazole can not only remarkably shorten the synthetic route through C—H direct arylation but also enhance molecular planarity with the simultaneous incorporation of S···N and S···Cl noncovalently conformational locks (NoCLs). The photovoltaic devices based on PM6:Tz‐Cl exhibited a power conversion efficiency as high as 11.10%, much higher than that of PM6:Tz‐H (6.41%), mainly due to more efficient exciton dissociation, better and more balanced carrier mobility, less charge recombination, and more favorable morphology. These findings demonstrate the great potential of NoCLs in achieving low‐cost and high‐performance NFREAs. [ABSTRACT FROM AUTHOR]