Search

Solar-aided coal-fired power generation systems have been extensively studied and exhibit several advantages in the utilisation of solar energy. The issue with the solar augmentation of coal-fired plants is the limitation of the potential solar contribution that is practical to achieve when considering boiler safety issues. This study proposes the combination of parabolic troughs and solar towers to collect solar energy, that is then introduced into the preheaters and boilers of coal-fired power plants. Under the same investment conditions, this combination of solar technologies can provide more solar exergy and reduce the practical constraints on the solar contribution. The paper shows that the potential for a 660MW e power plant, integrated with a combined solar field allows the highest solar exergy share of 8.51% to be reached. This enables an increased fuel saving of at least 1.58 and 4.24 g/kWh compared to other systems, that gives a minimum coal consumption of 253.17 and 255.83 g/kWh, respectively. The combined solar field provides a maximum available solar exergy of 69.43 MW th , which is 7.83%–11.88% higher than the alternative compared systems. The enhanced solar exergy contribution and cost-effectiveness can be observed in this novel system under different solar loads and cost conditions. • Original combined solar trough and tower aided coal-fired power is proposed. • Solar exergy share increased by 0.57–1.65% under the same investment condition. • In proposed system, minimum 1.58–4.24 g/kWh coal fuel can be further saved. • Optimum configuration of solar field for better cost-effectiveness is explored. [ABSTRACT FROM AUTHOR]

Highlights • Solar aided coal-fired power system is simulated for typical meteorological year. • Annual efficiency and levelized cost of electricity are characterized. • Annual coal consumption reduced over 14,000 tons for a 600 MW e power system. • Thermal storage capacity is optimized to achieve lowest cost of electricity. Abstract The integration of solar energy into coal-fired power plants has been proven as a potential approach in the utilization of solar energy to reduce coal consumption. Moreover, solar augmentation offers low cost and low risk alternatives to stand-alone solar thermal power plants. In this study, the annual performance of a solar tower aided coal-fired power (STACP) system is investigated, and the influence of thermal storage system capacity on the annual solar generating power and annual solar-to-electricity efficiency is explored. The thermal storage system capacity is optimized to obtain the lowest levelized cost of electricity (LCOE). At the same time, the influence and sensitivity of several important economic factors are explored and assessed. Results demonstrate that compared to a coal-fired power system, the reduction in the annual average coal consumption rate of the STACP system with high direct normal irradiance (DNI), medium DNI, and low DNI are 5.79, 4.52, and 3.22 g/kWh, respectively. At a minimum, the annual coal consumption can be reduced by 14,000 t in a 600 MW e power generation unit. Because the same solar field is considered under different DNI conditions, the LCOE in the high DNI, medium DNI, and low DNI scenarios are all fairly similar (6.37, 6.40, and 6.41 ¢/kWh, respectively). When the solar multiple is 3.0, the optimal thermal storage capacity of the STACP system, with high, medium, and low DNIs are 6.73, 4.42, and 2.21 h, respectively. The sensitivity analysis shows that the change in economic parameters exerts more influence on the STACP system with the high DNI compared with the other two scenarios. [ABSTRACT FROM AUTHOR]

Abstract Solar aided coal-fired power system has been proven to be a promising way to utilise solar energy in large scale. In this paper, the performances of the solar tower aided coal-fired power (STACP) system at 100% load, 75% load, and 50% load for different days are investigated and the maximum solar power that the boiler can absorb under different plant loads are explored. Then, the effects of solar multiple (SM) and the thermal energy storage (TES) hour on the daily performance of STACP system are investigated. Results show that the maximum solar power that a 600 MW e boiler can absorb at 100% load, 75% load and 50% load are 76.4 MW th , 54.2 MW th and 23.0 MW th , respectively. Due to the augmented energy from the solar field, the maximum standard coal consumption rate is reduced by 13.53 g/kWh, 12.81 g/kWh and 8.22 g/kWh at 100% load, 75% load and 50% load, respectively. With an increase of solar power input, the boiler efficiency, overall system efficiency and solar thermal-to-electricity efficiency show a downward trend. In addition, the daily coal consumption of summer solstice is the lowest while the winter solstice is the highest for a particular SM and TES hour. Highlights • Performances of STACP system are investigated at different loads with different solar shares. • The maximum solar energy that the boiler can absorb is determined. • Performances of STACP system are investigated at different weather conditions. • Daily performance of STACP system are explored with different SM and TES hours. [ABSTRACT FROM AUTHOR]

A Solar Tower Aided Coal-fired Power (STACP) system utilizes a solar tower coupled to a conventional coal-fired power system to reduce pollutants, greenhouse gas emissions and the investment of solar energy facilities. This paper examines three different schemes for integrating solar energy into a conventional boiler. For each scheme, an energy and exergy analysis of a 600 MW e supercritical coal-fired power system is combined with 53 MW th of solar energy in both a fuel saving mode and a power boosting mode. The results show that, for all these integration schemes, the boiler’s efficiency and system’s efficiency are reduced. However, the standard coal consumption rate is lower in comparison to conventional power plants and the standard coal consumption rate in the fuel saving mode is lower than that in the power boosting mode for all three schemes. Comprehensively considering both the standard coal consumption rate and efficiency, the scheme that uses solar energy to heat superheat steam and subcooled feed-water is the best integration option. Compared with a coal-fired only system, the saved standard coal consumption rate of the above mentioned scheme in fuel saving mode and power boosting mode can reach up to 11.15 g/kWh and 11.11 g/kWh, respectively. Exergy analysis shows, for STACP system, exergy losses of boiler and solar field contribute over 88% of whole system’s exergy loss. [ABSTRACT FROM AUTHOR]

The new challenge of the European Commission is to limit water consumption in Concentrating Solar Power (CSP) plants, especially significant in the cooling process. Hybrid cooling systems are presented as a potential solution to achieve water consumption reduction since they also avoid a high penalty of efficiency loss in the power block. In this work, a hybrid cooling pilot plant installed at Plataforma Solar de Almería is evaluated experimentally. The system has been tested under different ambient and operating conditions to analyze their influence on the water and electricity consumption. The results reveal that significant water savings were achieved in comparison with the conventional only-wet configuration. Concretely, a maximum water consumption saving of 67% was found at high ambient temperatures (between 25 and 30 °C) and for a thermal load of 80% when a hybrid configuration was used. The optimal operating strategies that achieve a tradeoff between low water and electricity consumption have been identified by two efficiency indexes: the specific electricity and water consumption. The parallel configuration was the optimal one in most of the cases. At high ambient temperatures and 80% thermal load, the electricity and water consumptions of this configuration were 0.033 kW e /kW th and 0.071 L/kW th , respectively. • Test campaign to investigate the optimal configurations of a hybrid cooler. • Trade-off between water and electric energy consumption under several conditions. • Specific electricity consumption and specific water consumption for the evaluation. • Maximum water consumption saving of 67% for parallel configuration split ratio 25%. • Maximum electricity reduction of 59% for parallel configuration split ratio 50%. [ABSTRACT FROM AUTHOR]